OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/dts/bindings/usb/atmel,sam-usbhs.yaml

28 lines
414 B
YAML
Raw Normal View History

drivers: usb: add usb device driver for Atmel SAM E70 family This patch adds a USB device driver for the USBHS device that can be found on Atmel SAM E70 SoC family. Only the FIFO mode is supported (as opposed to DMA). It supports LS, FS and HS modes, but defaults to FS mode as Zephyr does not fully support HS mode yet. Tested examples on an Atmel SMART SAM E70 Xplained Board: * usb/cdc_acm * usb/hid-mouse * usb/mass Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2018-11-01 05:42:47 +08:00
#
# Copyright (c) 2018 Aurelien Jarno
#
# SPDX-License-Identifier: Apache-2.0
#
yaml: Remove redundant document separators YAML document separators are needed e.g. when doing $ cat doc1.yaml doc2.yaml | <parser> For the bindings, we never parse concatenated documents. Assume we don't for any other .yaml files either. Having document separators in e.g. base.yaml makes !include a bit confusing, since the !included files are merged and not separate documents (the merging is done in Python code though, so it makes no difference for behavior). The replacement was done with $ git ls-files '*.yaml' | \ xargs sed -i -e '${/\s*\.\.\.\s*/d;}' -e 's/^\s*---\s*$//' First pattern removes ... at the end of files, second pattern clears a line with a lone --- on it. Some redundant blank lines at the end of files were cleared with $ git ls-files '*.yaml' | xargs sed -i '${/^\s*$/d}' This is more about making sure people can understand why every part of a binding is there than about removing some text. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-06-19 06:03:49 +08:00
drivers: usb: add usb device driver for Atmel SAM E70 family This patch adds a USB device driver for the USBHS device that can be found on Atmel SAM E70 SoC family. Only the FIFO mode is supported (as opposed to DMA). It supports LS, FS and HS modes, but defaults to FS mode as Zephyr does not fully support HS mode yet. Tested examples on an Atmel SMART SAM E70 Xplained Board: * usb/cdc_acm * usb/hid-mouse * usb/mass Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2018-11-01 05:42:47 +08:00
title: Atmel SAM USBHS
description: >
Atmel SAM Family USB (USBHS) in device mode
dts/bindings: Convert bindings to new include syntax Convert from: inherits: !include spi-device.yaml to: include: spi-device.yaml Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-08-22 07:10:12 +08:00
include: usb-ep.yaml
drivers: usb: add usb device driver for Atmel SAM E70 family This patch adds a USB device driver for the USBHS device that can be found on Atmel SAM E70 SoC family. Only the FIFO mode is supported (as opposed to DMA). It supports LS, FS and HS modes, but defaults to FS mode as Zephyr does not fully support HS mode yet. Tested examples on an Atmel SMART SAM E70 Xplained Board: * usb/cdc_acm * usb/hid-mouse * usb/mass Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2018-11-01 05:42:47 +08:00
properties:
compatible:
constraint: "atmel,sam-usbhs"
reg:
dts: bindings: Have 'required: true/false' instead of 'category: ...' The 'category: required/optional' setting for properties is just a yes/no thing. Using a boolean makes it clearer, so have 'required: true/false' instead. Print a clear error when 'category:' is used: edtlib.EDTError: please put 'required: true' instead of 'category: required' in 'properties: foo: ...' in test-bindings/sub-node-parent.yaml - 'category' has been removed The old scripts in scripts/dts/ ignore this setting, and only print a warning if 'category: required' in an inherited binding is changed to 'category: optional'. Remove that code, since the new scripts already have the same check. The replacement was done with git ls-files 'dts/bindings/*.yaml' | xargs sed -i \ -e 's/category:\s*required/required: true/' \ -e 's/category:\s*optional/required: false/' dts/binding-template.yaml is updated as well. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-08-28 06:22:01 +08:00
required: true
drivers: usb: add usb device driver for Atmel SAM E70 family This patch adds a USB device driver for the USBHS device that can be found on Atmel SAM E70 SoC family. Only the FIFO mode is supported (as opposed to DMA). It supports LS, FS and HS modes, but defaults to FS mode as Zephyr does not fully support HS mode yet. Tested examples on an Atmel SMART SAM E70 Xplained Board: * usb/cdc_acm * usb/hid-mouse * usb/mass Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2018-11-01 05:42:47 +08:00
interrupts:
dts: bindings: Have 'required: true/false' instead of 'category: ...' The 'category: required/optional' setting for properties is just a yes/no thing. Using a boolean makes it clearer, so have 'required: true/false' instead. Print a clear error when 'category:' is used: edtlib.EDTError: please put 'required: true' instead of 'category: required' in 'properties: foo: ...' in test-bindings/sub-node-parent.yaml - 'category' has been removed The old scripts in scripts/dts/ ignore this setting, and only print a warning if 'category: required' in an inherited binding is changed to 'category: optional'. Remove that code, since the new scripts already have the same check. The replacement was done with git ls-files 'dts/bindings/*.yaml' | xargs sed -i \ -e 's/category:\s*required/required: true/' \ -e 's/category:\s*optional/required: false/' dts/binding-template.yaml is updated as well. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-08-28 06:22:01 +08:00
required: true
drivers: usb: add usb device driver for Atmel SAM E70 family This patch adds a USB device driver for the USBHS device that can be found on Atmel SAM E70 SoC family. Only the FIFO mode is supported (as opposed to DMA). It supports LS, FS and HS modes, but defaults to FS mode as Zephyr does not fully support HS mode yet. Tested examples on an Atmel SMART SAM E70 Xplained Board: * usb/cdc_acm * usb/hid-mouse * usb/mass Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2018-11-01 05:42:47 +08:00
peripheral-id:
type: int
dts: bindings: Have 'required: true/false' instead of 'category: ...' The 'category: required/optional' setting for properties is just a yes/no thing. Using a boolean makes it clearer, so have 'required: true/false' instead. Print a clear error when 'category:' is used: edtlib.EDTError: please put 'required: true' instead of 'category: required' in 'properties: foo: ...' in test-bindings/sub-node-parent.yaml - 'category' has been removed The old scripts in scripts/dts/ ignore this setting, and only print a warning if 'category: required' in an inherited binding is changed to 'category: optional'. Remove that code, since the new scripts already have the same check. The replacement was done with git ls-files 'dts/bindings/*.yaml' | xargs sed -i \ -e 's/category:\s*required/required: true/' \ -e 's/category:\s*optional/required: false/' dts/binding-template.yaml is updated as well. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-08-28 06:22:01 +08:00
required: true
drivers: usb: add usb device driver for Atmel SAM E70 family This patch adds a USB device driver for the USBHS device that can be found on Atmel SAM E70 SoC family. Only the FIFO mode is supported (as opposed to DMA). It supports LS, FS and HS modes, but defaults to FS mode as Zephyr does not fully support HS mode yet. Tested examples on an Atmel SMART SAM E70 Xplained Board: * usb/cdc_acm * usb/hid-mouse * usb/mass Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2018-11-01 05:42:47 +08:00
description: peripheral ID