OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/dts/bindings/interrupt-controller/atmel,sam0-eic.yaml

20 lines
315 B
YAML
Raw Normal View History

drivers: gpio: sam0: Add interrupt support This adds interrupt support to the SAM0 GPIO driver. This is heavily inspired by @nzmichaelh work in #5715. The primary difference from that implementation is that here the External Interrupt Controller (EIC) is separated out into an interrupt controller driver that is less tightly coupled to the GPIO API. Instead it implements more of a conversion from the EIC's own odd multiplexing to a more traditional port and pin mask IRQ-like callback. Unfortunately, through the EIC on the SAMD2x are relatively well behaved in terms of pin to EIC line mappings, other chips that share the peripheral interface are not. So the EIC driver implements a per-line lookup to the pin and port pair using definitions extracted from the ASF headers. The EIC driver still makes some assumptions about how it will be used: mostly it assumes exactly one callback per port. This should be fine as the only intended user is the GPIO driver itself. This has been tested with some simple programs and with tests/drivers/gpio/gpio_basic_api on a SAMD21 breakout and an adafruit_trinket_m0 board. Signed-off-by: Derek Hageman <hageman@inthat.cloud>
2019-03-02 10:29:07 +08:00
title: Atmel SAM0 External Interrupt Controller
description: >
This binding describes the Atmel SAM0 series External Interrupt Controller
dts/bindings: Convert bindings to new include syntax Convert from: inherits: !include spi-device.yaml to: include: spi-device.yaml Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-08-22 07:10:12 +08:00
include: base.yaml
dts/bindings: Move common properties into a base.yaml Move common properties like 'compatible', 'reg', 'reg-names', 'interrupts', 'interrupt-names', and 'label' into one common base.yaml that all the other yaml's can inherit from. This removes both duplication and inconsistent definition. The device specific yamls just need to say if a property is 'required' or not. NOTE: due to some generation conflicts we did not covert 'soc-nv-flash.yaml' to use base.yaml. Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2019-06-08 00:12:49 +08:00
drivers: gpio: sam0: Add interrupt support This adds interrupt support to the SAM0 GPIO driver. This is heavily inspired by @nzmichaelh work in #5715. The primary difference from that implementation is that here the External Interrupt Controller (EIC) is separated out into an interrupt controller driver that is less tightly coupled to the GPIO API. Instead it implements more of a conversion from the EIC's own odd multiplexing to a more traditional port and pin mask IRQ-like callback. Unfortunately, through the EIC on the SAMD2x are relatively well behaved in terms of pin to EIC line mappings, other chips that share the peripheral interface are not. So the EIC driver implements a per-line lookup to the pin and port pair using definitions extracted from the ASF headers. The EIC driver still makes some assumptions about how it will be used: mostly it assumes exactly one callback per port. This should be fine as the only intended user is the GPIO driver itself. This has been tested with some simple programs and with tests/drivers/gpio/gpio_basic_api on a SAMD21 breakout and an adafruit_trinket_m0 board. Signed-off-by: Derek Hageman <hageman@inthat.cloud>
2019-03-02 10:29:07 +08:00
properties:
compatible:
constraint: "atmel,sam0-eic"
reg:
dts: bindings: Have 'required: true/false' instead of 'category: ...' The 'category: required/optional' setting for properties is just a yes/no thing. Using a boolean makes it clearer, so have 'required: true/false' instead. Print a clear error when 'category:' is used: edtlib.EDTError: please put 'required: true' instead of 'category: required' in 'properties: foo: ...' in test-bindings/sub-node-parent.yaml - 'category' has been removed The old scripts in scripts/dts/ ignore this setting, and only print a warning if 'category: required' in an inherited binding is changed to 'category: optional'. Remove that code, since the new scripts already have the same check. The replacement was done with git ls-files 'dts/bindings/*.yaml' | xargs sed -i \ -e 's/category:\s*required/required: true/' \ -e 's/category:\s*optional/required: false/' dts/binding-template.yaml is updated as well. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-08-28 06:22:01 +08:00
required: true
drivers: gpio: sam0: Add interrupt support This adds interrupt support to the SAM0 GPIO driver. This is heavily inspired by @nzmichaelh work in #5715. The primary difference from that implementation is that here the External Interrupt Controller (EIC) is separated out into an interrupt controller driver that is less tightly coupled to the GPIO API. Instead it implements more of a conversion from the EIC's own odd multiplexing to a more traditional port and pin mask IRQ-like callback. Unfortunately, through the EIC on the SAMD2x are relatively well behaved in terms of pin to EIC line mappings, other chips that share the peripheral interface are not. So the EIC driver implements a per-line lookup to the pin and port pair using definitions extracted from the ASF headers. The EIC driver still makes some assumptions about how it will be used: mostly it assumes exactly one callback per port. This should be fine as the only intended user is the GPIO driver itself. This has been tested with some simple programs and with tests/drivers/gpio/gpio_basic_api on a SAMD21 breakout and an adafruit_trinket_m0 board. Signed-off-by: Derek Hageman <hageman@inthat.cloud>
2019-03-02 10:29:07 +08:00
interrupts:
dts: bindings: Have 'required: true/false' instead of 'category: ...' The 'category: required/optional' setting for properties is just a yes/no thing. Using a boolean makes it clearer, so have 'required: true/false' instead. Print a clear error when 'category:' is used: edtlib.EDTError: please put 'required: true' instead of 'category: required' in 'properties: foo: ...' in test-bindings/sub-node-parent.yaml - 'category' has been removed The old scripts in scripts/dts/ ignore this setting, and only print a warning if 'category: required' in an inherited binding is changed to 'category: optional'. Remove that code, since the new scripts already have the same check. The replacement was done with git ls-files 'dts/bindings/*.yaml' | xargs sed -i \ -e 's/category:\s*required/required: true/' \ -e 's/category:\s*optional/required: false/' dts/binding-template.yaml is updated as well. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-08-28 06:22:01 +08:00
required: true
drivers: gpio: sam0: Add interrupt support This adds interrupt support to the SAM0 GPIO driver. This is heavily inspired by @nzmichaelh work in #5715. The primary difference from that implementation is that here the External Interrupt Controller (EIC) is separated out into an interrupt controller driver that is less tightly coupled to the GPIO API. Instead it implements more of a conversion from the EIC's own odd multiplexing to a more traditional port and pin mask IRQ-like callback. Unfortunately, through the EIC on the SAMD2x are relatively well behaved in terms of pin to EIC line mappings, other chips that share the peripheral interface are not. So the EIC driver implements a per-line lookup to the pin and port pair using definitions extracted from the ASF headers. The EIC driver still makes some assumptions about how it will be used: mostly it assumes exactly one callback per port. This should be fine as the only intended user is the GPIO driver itself. This has been tested with some simple programs and with tests/drivers/gpio/gpio_basic_api on a SAMD21 breakout and an adafruit_trinket_m0 board. Signed-off-by: Derek Hageman <hageman@inthat.cloud>
2019-03-02 10:29:07 +08:00
label:
dts: bindings: Have 'required: true/false' instead of 'category: ...' The 'category: required/optional' setting for properties is just a yes/no thing. Using a boolean makes it clearer, so have 'required: true/false' instead. Print a clear error when 'category:' is used: edtlib.EDTError: please put 'required: true' instead of 'category: required' in 'properties: foo: ...' in test-bindings/sub-node-parent.yaml - 'category' has been removed The old scripts in scripts/dts/ ignore this setting, and only print a warning if 'category: required' in an inherited binding is changed to 'category: optional'. Remove that code, since the new scripts already have the same check. The replacement was done with git ls-files 'dts/bindings/*.yaml' | xargs sed -i \ -e 's/category:\s*required/required: true/' \ -e 's/category:\s*optional/required: false/' dts/binding-template.yaml is updated as well. Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-08-28 06:22:01 +08:00
required: true