OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/tests/drivers/build_all/sensors_i_z.conf

32 lines
543 B
Plaintext
Raw Normal View History

tests: add CONFIG_TEST for marking tests Mark tests with CONFIG_TEST to allow for test specific setup and configuration. Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2018-01-07 05:15:53 +08:00
CONFIG_TEST=y
tests: Adjust drivers/build_all to build for more boards. The build_all tests contain an ever growing list of device drivers to build. Ideally we minimize the number of images we build, but we already observe that some of the tests, notably sensors, is too big for some of our supported boards. Rather disable an ever growing list of boards as the build_all tests get bigger it would be better to split the tests into smaller chunks that can reasonably be expected to run on any supported board. We split the sensor test set into two, the division is arbitrary, based on the name of the driver. This allows us to remove the filter on the quark_d2000. The current split into two groups is arbirary, in the future it is inevitable that as the list of supported drivers grows, we will need to further subdivied the larger tests. Change-Id: If7ee00b3c8e1749c4c827f83d7cbc2feb70e56ad Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
2016-10-24 20:36:29 +08:00
CONFIG_GPIO=y
CONFIG_I2C=y
CONFIG_SENSOR=y
CONFIG_SPI=y
drivers: sensor: Migrate to new logger Move all sensor drivers and samples to new logging system. Signed-off-by: Punit Vara <punit.vara@intel.com>
2018-10-10 14:38:54 +08:00
CONFIG_LOG=y
CONFIG_SENSOR_LOG_LEVEL_DBG=y
tests: expand sensor build testing by enabling more sensors This will help catch build issues with sensors by enabling all sensors we have into one single application using all supported IOs. Change-Id: Id8c201b8ae9b74dccc62d6440899ff487ea09d43 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-07 19:44:09 +08:00
CONFIG_ISL29035=y
tests: build_all: Add missing sensor drivers and rebalance testcases Adds many missing sensor drivers and rebalances the testcases to instantiate similar numbers of sensor drivers. Splits the sensor trigger testcase into two due to having too many thread objects. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2018-09-18 21:43:44 +08:00
CONFIG_LIS2DH=y
driver: sensor: Add support for LIS2MDL Mag sensor Added support to LIS2MDL Magnetometer sensor provided with following features: - I2C interface - Mag data - Temperature data - ODR configurable by config or at runtime - Trigger mode selectable by menuconfig - IRQ pin configurable (by dts or Kconfig) - Hard Iron offset setting at runtime - Include yaml file Tested on ST MEMS IKS01A2 + NUCLEO STM32F411RE board. LIS2MDL connected to I2C master interface (SPI 3 wire not supported yet). Test run with all ODR {10, 20, 50, 100} Hz in poll and trigger mode. GPIO IRQ dts configuration has been tested by adding to boards/arm/nucleo_f411re/nucleo_f411re.dts file this patch: &i2c1 { status = "ok"; clock-frequency = <I2C_BITRATE_FAST>; + + /* ST Microelectronics LIS2MDL mag sensor */ + lis2mdl-magn@1e { + compatible = "st,lis2mdl-magn"; + reg = <0x1e>; + irq-gpios = <&gpioa 4 0>; + label = "LIS2MDL"; + status = "ok"; + }; }; and adding boards/arm/nucleo_f411re/dts.fixup with following content: ST_STM32_I2C_V1_40005400_ST_LIS2MDL_MAGN_1E_LABEL ST_STM32_I2C_V1_40005400_ST_LIS2MDL_MAGN_1E_BASE_ADDRESS ST_STM32_I2C_V1_40005400_ST_LIS2MDL_MAGN_1E_BUS_NAME ST_STM32_I2C_V1_40005400_ST_LIS2MDL_MAGN_1E_IRQ_GPIOS_CONTROLLER ST_STM32_I2C_V1_40005400_ST_LIS2MDL_MAGN_1E_IRQ_GPIOS_PIN For more info on this LIS2MDL please follow this link: http://www.st.com/en/mems-and-sensors/lis2mdl.html Signed-off-by: Mario Tesi <mario.tesi@st.com>
2018-03-08 22:34:55 +08:00
CONFIG_LIS2MDL=y
tests: expand sensor build testing by enabling more sensors This will help catch build issues with sensors by enabling all sensors we have into one single application using all supported IOs. Change-Id: Id8c201b8ae9b74dccc62d6440899ff487ea09d43 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-07 19:44:09 +08:00
CONFIG_LIS3DH=y
CONFIG_LIS3MDL=y
tests: build_all: Add missing sensor drivers and rebalance testcases Adds many missing sensor drivers and rebalances the testcases to instantiate similar numbers of sensor drivers. Splits the sensor trigger testcase into two due to having too many thread objects. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2018-09-18 21:43:44 +08:00
CONFIG_LPS22HB=y
tests: expand sensor build testing by enabling more sensors This will help catch build issues with sensors by enabling all sensors we have into one single application using all supported IOs. Change-Id: Id8c201b8ae9b74dccc62d6440899ff487ea09d43 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-07 19:44:09 +08:00
CONFIG_LPS25HB=y
tests: drivers: lsm303dlhc build test Enable sensor build test for lsm303dlhc_accel/magn Signed-off-by: Philémon Jaermann <p.jaermann@gmail.com>
2018-04-17 03:31:14 +08:00
CONFIG_LSM303DLHC_ACCEL=y
CONFIG_LSM303DLHC_MAGN=y
tests: build_all: Add missing sensor drivers and rebalance testcases Adds many missing sensor drivers and rebalances the testcases to instantiate similar numbers of sensor drivers. Splits the sensor trigger testcase into two due to having too many thread objects. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2018-09-18 21:43:44 +08:00
CONFIG_LSM6DS0=y
CONFIG_LSM6DSL=y
CONFIG_LSM9DS0_GYRO=y
tests: Adjust drivers/build_all to build for more boards. The build_all tests contain an ever growing list of device drivers to build. Ideally we minimize the number of images we build, but we already observe that some of the tests, notably sensors, is too big for some of our supported boards. Rather disable an ever growing list of boards as the build_all tests get bigger it would be better to split the tests into smaller chunks that can reasonably be expected to run on any supported board. We split the sensor test set into two, the division is arbitrary, based on the name of the driver. This allows us to remove the filter on the quark_d2000. The current split into two groups is arbirary, in the future it is inevitable that as the list of supported drivers grows, we will need to further subdivied the larger tests. Change-Id: If7ee00b3c8e1749c4c827f83d7cbc2feb70e56ad Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
2016-10-24 20:36:29 +08:00
CONFIG_LSM9DS0_MFD=y
tests: build_all: Add missing sensors Now that we have an application level dts fixup, we can re-enable the fxos8700 sensor in the build_all test. Also added fxas21002 and max30101 sensors which were missing. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2018-01-31 03:56:49 +08:00
CONFIG_MAX30101=y
tests: expand sensor build testing by enabling more sensors This will help catch build issues with sensors by enabling all sensors we have into one single application using all supported IOs. Change-Id: Id8c201b8ae9b74dccc62d6440899ff487ea09d43 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-07 19:44:09 +08:00
CONFIG_MAX44009=y
CONFIG_MCP9808=y
CONFIG_MPU6050=y
tests: build_all: Add missing sensor drivers and rebalance testcases Adds many missing sensor drivers and rebalances the testcases to instantiate similar numbers of sensor drivers. Splits the sensor trigger testcase into two due to having too many thread objects. Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2018-09-18 21:43:44 +08:00
CONFIG_SHT3XD=y
CONFIG_SX9500=y
CONFIG_TEMP_NRF5=y
CONFIG_TH02=y
CONFIG_TMP007=y
CONFIG_TMP112=y
CONFIG_VL53L0X=y