OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/soc/arm/silabs_exx32/efr32mg12p/soc_pinmap.h

61 lines
1.8 KiB
C
Raw Normal View History

soc: arm: exx32: Add Silabs EFR32MG12P soc files The Silicon Labs EFR32MG12P Mighty Gecko MCU includes: * Cortex-M4F core at 40MHz * up to 1024KB of flash and 256KB of RAM * integrated Sub-GHz and/or 2.4GHz radio * multiple low power peripherals Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com> Signed-off-by: Endre Karlson <endre.karslon@gmail.com>
2018-10-17 14:58:14 +08:00
/*
* Copyright (c) 2018 Christian Taedcke, Diego Sueiro
* SPDX-License-Identifier: Apache-2.0
*/
/** @file
* @brief Silabs EFR32MG MCU pin definitions.
*
* This file contains pin configuration data required by different MCU
* modules to correctly configure GPIO controller.
*/
#ifndef _SOC_PINMAP_H_
#define _SOC_PINMAP_H_
#include <em_gpio.h>
#ifdef CONFIG_UART_GECKO
#ifdef CONFIG_USART_GECKO_0
dts: silabs: use 'aliases' to remove dts_fixup defines By adding 'aliases' node in SoC .dtsi file it is possible to generate DT_ defines which specify a logical name rather than relay on module location on APB bus. E.g. DT_SILABS_GECKO_USART_40010000_LABEL becomes DT_SILABS_GECKO_USART_USART_0_LABEL. Thus it is possible to remove dts_fixup.h defines. Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
2018-11-28 20:07:44 +08:00
#if (DT_SILABS_GECKO_USART_USART_0_LOCATION == 0)
soc: arm: exx32: Add Silabs EFR32MG12P soc files The Silicon Labs EFR32MG12P Mighty Gecko MCU includes: * Cortex-M4F core at 40MHz * up to 1024KB of flash and 256KB of RAM * integrated Sub-GHz and/or 2.4GHz radio * multiple low power peripherals Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com> Signed-off-by: Endre Karlson <endre.karslon@gmail.com>
2018-10-17 14:58:14 +08:00
#define PIN_USART0_TXD {gpioPortA, 0, gpioModePushPull, 1}
#define PIN_USART0_RXD {gpioPortA, 1, gpioModeInput, 0}
#else
#error ("Serial Driver for Gecko MCUs not implemented for this location index")
#endif
#endif /* CONFIG_USART_GECKO_0 */
#endif /* CONFIG_UART_GECKO */
#ifdef CONFIG_LEUART_GECKO
#ifdef CONFIG_LEUART_GECKO_0
dts: silabs: use 'aliases' to remove dts_fixup defines By adding 'aliases' node in SoC .dtsi file it is possible to generate DT_ defines which specify a logical name rather than relay on module location on APB bus. E.g. DT_SILABS_GECKO_USART_40010000_LABEL becomes DT_SILABS_GECKO_USART_USART_0_LABEL. Thus it is possible to remove dts_fixup.h defines. Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
2018-11-28 20:07:44 +08:00
#if (DT_SILABS_GECKO_LEUART_LEUART_0_LOCATION == 27)
soc: arm: exx32: Add Silabs EFR32MG12P soc files The Silicon Labs EFR32MG12P Mighty Gecko MCU includes: * Cortex-M4F core at 40MHz * up to 1024KB of flash and 256KB of RAM * integrated Sub-GHz and/or 2.4GHz radio * multiple low power peripherals Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com> Signed-off-by: Endre Karlson <endre.karslon@gmail.com>
2018-10-17 14:58:14 +08:00
#define PIN_LEUART0_TXD {gpioPortF, 3, gpioModePushPull, 1}
#define PIN_LEUART0_RXD {gpioPortF, 4, gpioModeInput, 1}
#else
#error ("Serial Driver for Gecko MCUs not implemented for this location index")
#endif
#endif /* CONFIG_LEUART_GECKO_0 */
#endif /* CONFIG_LEUART_GECKO */
#ifdef CONFIG_I2C_GECKO
#ifdef CONFIG_I2C_0
dts: silabs: use 'aliases' to remove dts_fixup defines By adding 'aliases' node in SoC .dtsi file it is possible to generate DT_ defines which specify a logical name rather than relay on module location on APB bus. E.g. DT_SILABS_GECKO_USART_40010000_LABEL becomes DT_SILABS_GECKO_USART_USART_0_LABEL. Thus it is possible to remove dts_fixup.h defines. Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
2018-11-28 20:07:44 +08:00
#if (DT_SILABS_GECKO_I2C_I2C_0_LOCATION == 15)
soc: arm: exx32: Add Silabs EFR32MG12P soc files The Silicon Labs EFR32MG12P Mighty Gecko MCU includes: * Cortex-M4F core at 40MHz * up to 1024KB of flash and 256KB of RAM * integrated Sub-GHz and/or 2.4GHz radio * multiple low power peripherals Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com> Signed-off-by: Endre Karlson <endre.karslon@gmail.com>
2018-10-17 14:58:14 +08:00
#define PIN_I2C0_SDA {gpioPortC, 10, gpioModeWiredAnd, 1}
#define PIN_I2C0_SCL {gpioPortC, 11, gpioModeWiredAnd, 1}
#else
#error ("I2C Driver for Gecko MCUs not implemented for this location index")
#endif
#endif /* CONFIG_I2C_0 */
#ifdef CONFIG_I2C_1
dts: silabs: use 'aliases' to remove dts_fixup defines By adding 'aliases' node in SoC .dtsi file it is possible to generate DT_ defines which specify a logical name rather than relay on module location on APB bus. E.g. DT_SILABS_GECKO_USART_40010000_LABEL becomes DT_SILABS_GECKO_USART_USART_0_LABEL. Thus it is possible to remove dts_fixup.h defines. Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
2018-11-28 20:07:44 +08:00
#if (DT_SILABS_GECKO_I2C_I2C_1_LOCATION == 17)
soc: arm: exx32: Add Silabs EFR32MG12P soc files The Silicon Labs EFR32MG12P Mighty Gecko MCU includes: * Cortex-M4F core at 40MHz * up to 1024KB of flash and 256KB of RAM * integrated Sub-GHz and/or 2.4GHz radio * multiple low power peripherals Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com> Signed-off-by: Endre Karlson <endre.karslon@gmail.com>
2018-10-17 14:58:14 +08:00
#define PIN_I2C1_SDA {gpioPortC, 4, gpioModeWiredAnd, 1}
#define PIN_I2C1_SCL {gpioPortC, 5, gpioModeWiredAnd, 1}
#else
#error ("I2C Driver for Gecko MCUs not implemented for this location index")
#endif
#endif /* CONFIG_I2C_1 */
#endif /* CONFIG_I2C_GECKO */
#endif /* _SOC_PINMAP_H_ */