zephyr/arch/arm/soc/st_stm32/stm32f3/soc.h

/*
 * Copyright (c) 2016 RnDity Sp. z o.o.
 *
 * SPDX-License-Identifier: Apache-2.0
 */

/**
 * @file SoC configuration macros for the STM32F3 family processors.
 *
 * Based on reference manual:
 *   STM32F303xB/C/D/E, STM32F303x6/8, STM32F328x8, STM32F358xC,
 *   STM32F398xE advanced ARM ® -based MCUs
 *   STM32F37xx advanced ARM ® -based MCUs
 *
 * Chapter 3.3: Memory organization
 */


#ifndef _STM32F3_SOC_H_
#define _STM32F3_SOC_H_

#define GPIO_REG_SIZE         0x400
/* base address for where GPIO registers start */
#define GPIO_PORTS_BASE       (GPIOA_BASE)

#ifndef _ASMLANGUAGE

#include <device.h>
#include <misc/util.h>
#include <drivers/rand32.h>

#include <stm32f3xx.h>

/* IO pin functions */
enum stm32f3x_pin_config_mode {
	STM32F3X_PIN_CONFIG_BIAS_HIGH_IMPEDANCE = 0,
	STM32F3X_PIN_CONFIG_BIAS_PULL_UP,
	STM32F3X_PIN_CONFIG_BIAS_PULL_DOWN,
	STM32F3X_PIN_CONFIG_ANALOG,
	STM32F3X_PIN_CONFIG_DRIVE_OPEN_DRAIN,
	STM32F3X_PIN_CONFIG_DRIVE_PUSH_PULL,
	STM32F3X_PIN_CONFIG_DRIVE_OPEN_DRAIN_PU,
	STM32F3X_PIN_CONFIG_DRIVE_OPEN_DRAIN_PD,
	STM32F3X_PIN_CONFIG_DRIVE_PUSH_PULL_PU,
	STM32F3X_PIN_CONFIG_DRIVE_PUSH_PULL_PD,
	STM32F3X_PIN_CONFIG_AF,
};

#include "soc_irq.h"

#ifdef CONFIG_SERIAL_HAS_DRIVER
#include <stm32f3xx_ll_usart.h>
#endif

#ifdef CONFIG_CLOCK_CONTROL_STM32_CUBE
#include <stm32f3xx_ll_utils.h>
#include <stm32f3xx_ll_bus.h>
#include <stm32f3xx_ll_rcc.h>
#include <stm32f3xx_ll_system.h>
#endif /* CONFIG_CLOCK_CONTROL_STM32_CUBE */

#ifdef CONFIG_I2C
#include <stm32f3xx_ll_i2c.h>
#endif

#endif /* !_ASMLANGUAGE */

#endif /* _STM32F3_SOC_H_ */