OrgZephyr/zephyr
OrgZephyr
/
zephyr
mirror of https://github.com/zephyrproject-rtos/zephyr.git
1
0
Fork 0
Code Issues Releases Wiki Activity
zephyr/drivers/sensor/Kconfig

104 lines
2.3 KiB
Plaintext
Raw Normal View History

Add infrastructure for sensor drivers Origin: Original Change-Id: I846b1601f1bdf15ad068b27baefc4b23ffab81e3 Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
2016-01-26 00:21:51 +08:00
# Kconfig - sensor configuration options
#
# Copyright (c) 2016 Intel Corporation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
menuconfig SENSOR
bool
prompt "Sensor Drivers"
default n
help
Include sensor drivers in system config
sensors: use one single sys log config for sensors Change-Id: I27aadd15ad0ebbaf6373591d52e63fe3f4560378 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-06 00:49:41 +08:00
config SYS_LOG_SENSOR_LEVEL
int "Sensor Log level"
depends on SYS_LOG && SENSOR
default 0
range 0 4
help
Sets log level for sensor driver.
Levels are:
- 0 OFF: do not write
- 1 ERROR: only write SYS_LOG_ERR
- 2 WARNING: write SYS_LOG_WRN in addition to previous level
- 3 INFO: write SYS_LOG_INF in addition to previous levels
- 4 DEBUG: write SYS_LOG_DBG in addition to previous levels
sensors: use one init priority config for all sensors Sensors are end-devices and usually nothing depends on them, so set a global priority for all sensors and use it instead of individual values per sensor. Change-Id: I5847411e783ef8a8517f0ab1d8234810513707b4 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-04 21:01:27 +08:00
config SENSOR_INIT_PRIORITY
int
prompt "Sensor init priority"
depends on SENSOR
default 90
help
Sensor initialization priority.
sensors: ak8975: move ak8975 to own directory under drivers/sensor/ Change-Id: Ib3a8e8a74430d30843db77954737c3ce5dfdce14 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-15 20:19:50 +08:00
source "drivers/sensor/ak8975/Kconfig"
sensor: add driver for AK8975 magnetometer Add driver for the AK8975 3-axis electonic compass. Datasheet: http://www.akm.com/akm/en/file/datasheet/AK8975.pdf Change-Id: I427f954396c8991a153e4447d746b855d19cb60d Origin: Original Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-05-27 16:33:29 +08:00
sensors: bma280: move bma280 to own directory under drivers/sensor/ Change-Id: I1c73d36a51ea88fbda3707c7d6630d54f8fd3545 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-15 20:19:51 +08:00
source "drivers/sensor/bma280/Kconfig"
sensor: add driver for BMA280 accelerometer Add device driver for the BMA280 I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y, accel-z and temperature channels. The driver also has support for data-ready and any-motion triggers. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA280-DS000-11_published.pdf Origin: Original Change-Id: Iff7246d7dd4a9358ec7a71e8ffbcfcccd49e393c Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com> Signed-off-by: Teodora Baluta <teodora.baluta@intel.com>
2016-02-18 23:40:55 +08:00
sensors: bmc150_magn: move bmc150_magn to own directory under drivers/sensor/ Change-Id: I725438747b3208ebd49f4f7d9ef6277721eaa48f Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-15 20:19:51 +08:00
source "drivers/sensor/bmc150_magn/Kconfig"
sensor: add driver for LSM9DS0 gyroscope Add device driver for the gyroscope part of LSM9DS0 gyroscope. Datasheet: https://www.adafruit.com/datasheets/LSM9DS0.pdf Change-Id: I25e0c8470c9b68c594bc4a0d2a9a13f8f41ee309 Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
2016-02-29 21:12:20 +08:00
sensors: bme280: move bme280 to own directory under drivers/sensor/ Change-Id: I53f5504773c914b0936091c459b80ab133b9e4ac Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-15 20:19:52 +08:00
source "drivers/sensor/bme280/Kconfig"
sensor: add support for BME280 * Rename BMP280 to BME280 which is a superset for the former. * Autodetect device based on chip ID. * Implement humidity fetching and reading for BME280 * Rename sample BMP280 to BME280 Change-Id: I565c769a7011e7496c9f1cad861d5ee311839b4f Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
2016-05-10 20:30:06 +08:00
sensors: bmg160: move bmg160 to own directory under drivers/sensor/ Change-Id: Ifae44714f08537835c8466fba11b6853f258f148 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-15 20:19:52 +08:00
source "drivers/sensor/bmg160/Kconfig"
sensor: add support for BMG160 gyroscope Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMG160-DS000-09.pdf Origin: Original Change-Id: I27469da8ff04c2eb26e92cc5d747b1bb8fee627b Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
2016-04-27 22:34:33 +08:00
sensor: add driver for BMI160 This patch adds support for the Curie's BMI160 IMU chip. Only polling is supported in this version. Datasheet: http://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMI160-DS000-07.pdf Origin: Original Change-Id: I759856d4bf123c21e9e4928f32bdf8f00aeeed24 Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
2016-03-31 20:05:03 +08:00
source "drivers/sensor/Kconfig.bmi160"
sensors: add driver for DHTxx sensors Add driver for the DHT temperature and relative himidity sensor family. The sensor has a single signal pin (in addition to GND and VDD) over which communication is done in a half-duplex manner (see datasheet for more details). Datasheets: http://www.micropik.com/PDF/dht11.pdf https://www.sparkfun.com/datasheets/Sensors/Temperature/DHT22.pdf http://akizukidenshi.com/download/ds/aosong/AM2302.pdf Origin: Original Change-Id: If8c8be73d7fdfef2ab2091bf9b8fe72bcd700ed1 Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-05-10 17:09:28 +08:00
source "drivers/sensor/Kconfig.dht"
sensor: add driver for HDC1008 temperature and humidity sensor Add driver for the HDC1008 temperature and relative humidity sensor. Datasheet: http://www.ti.com/lit/ds/symlink/hdc1008.pdf Origin: Original Change-Id: I63cb4cdd94120b80d0d6f3205da073f0817c4f17 Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-02-26 20:40:25 +08:00
source "drivers/sensor/Kconfig.hdc1008"
sensor: add driver for HMC5883L magnetometer Add driver for the I2C-based Honeywell HMC5883L magnetometer. Datasheet: https://cdn-shop.adafruit.com/datasheets/HMC5883L_3-Axis_Digital_Compass_IC.pdf Change-Id: I9ad56a7533d8d67402aa2ae2862ba339b04d3525 Origin: Original Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-06-08 20:59:31 +08:00
source "drivers/sensor/Kconfig.hmc5883l"
sensor: add driver for HP206C sensor This sensor is a high precision barometer, altimeter and temperature sensor. It can also be found on the Grove Barometer module (v1.0). Sensor datasheet: http://www.hoperf.com/upload/sensor/HP206C_DataSheet_EN_V2.0.pdf Grove link: http://www.seeedstudio.com/depot/Grove-Barometer-HighAccuracy-p-1865.html Origin: Original Change-Id: I99986b26b6b4447e31e12a1fc17ede3e6bb4c586 Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
2016-05-17 22:17:33 +08:00
source "drivers/sensor/Kconfig.hp206c"
sensor: add driver for HTS221 sensor Add driver for HTS221 temeprature and relative humidity sensor. Datasheet: http://www.st.com/resource/en/datasheet/hts221.pdf Interpreting humidity and temperature readings document: http://www.st.com/resource/en/technical_note/dm00208001.pdf Change-Id: I1fee9d8372ad71b22bc85a60939c82f81569e135 Origin: Original Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-05-24 17:09:22 +08:00
source "drivers/sensor/Kconfig.hts221"
sensor: add isl29035 light sensor Add device driver for the isl29035 ambient light and infrared light sensor. Datasheet: http://www.intersil.com/content/dam/Intersil/documents/isl2/isl29035.pdf Origin: Original Change-Id: Ib285f8def32d78d50f1d92998dca5f55d6603ca5 Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-01-26 23:07:34 +08:00
source "drivers/sensor/Kconfig.isl29035"
sensor: add driver for LIS3DH accelerometer Add device driver for the LIS3DH I2C-based triaxial accelerometer sensor, which supports reading data from the accel-x, accel-y and accel-z channels. Datasheet: http://www.st.com/web/en/resource/technical/document/datasheet/CD00274221.pdf Application note: http://www.st.com/web/en/resource/technical/document/application_note/CD00290365.pdf Change-Id: Ib51bd6346798249d850376e50d1c938eda8a3d28 Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-03-22 00:16:28 +08:00
source "drivers/sensor/Kconfig.lis3dh"
sensor: add driver for LIS3MDL magnetometer Add driver for the LIS3MDL ultra-low-power high-performance three-axis magnetic sensor. Datasheet: http://www.st.com/resource/en/datasheet/lis3mdl.pdf Application note: http://www.st.com/resource/en/application_note/dm00136626.pdf Change-Id: Id2d65e7525bef6c4fe50f86169a80f84197f8983 Origin: Original Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-05-18 15:24:46 +08:00
source "drivers/sensor/Kconfig.lis3mdl"
sensor: add driver for LPS25HB Add driver for LPS25HB pressure and temperature sensor. Datasheet: http://www.st.com/content/ccc/resource/technical/document/datasheet/9a/4c/aa/72/1f/45/4e/24/DM00141379.pdf/files/DM00141379.pdf/jcr:content/translations/en.DM00141379.pdf Change-Id: I6b616e879777b52f16f4e867c330e8beacf59fd3 Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com> Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-06-01 21:11:01 +08:00
source "drivers/sensor/Kconfig.lps25hb"
sensor: add driver for LSM6DS0 Add driver for LSM6DS0 accelerometer, gyroscope and temperature sensor. Change-Id: Ic04fa8d0bbf935e7f04ed7981554d8095ceb5ccf Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
2016-05-17 21:52:35 +08:00
source "drivers/sensor/Kconfig.lsm6ds0"
sensor: add driver for LSM9DS0 gyroscope Add device driver for the gyroscope part of LSM9DS0 gyroscope. Datasheet: https://www.adafruit.com/datasheets/LSM9DS0.pdf Change-Id: I25e0c8470c9b68c594bc4a0d2a9a13f8f41ee309 Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
2016-02-29 21:12:20 +08:00
source "drivers/sensor/Kconfig.lsm9ds0_gyro"
sensor: add driver for BMC150 magnetometer Add device driver for the magnetometer part of BMC150 sensor. Datasheet: https://ae-bst.resource.bosch.com/media/products/dokumente/bmc150/BST-BMC150-DS000-04.pdf Change-Id: Id7cbfd872a0a37e20afb03a8155c1f6851710a16 Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
2016-02-17 19:32:13 +08:00
sensor: add driver for LSM9DS0 accel and magn Add device driver for the multi function device (MFD) part of LSM9DS0: accelerometer, magnetometer and temperature. Datasheet: https://www.adafruit.com/datasheets/LSM9DS0.pdf Change-Id: I00b9db2c69c6e5229269afacb02bf5f921edabe9 Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
2016-03-16 23:17:56 +08:00
source "drivers/sensor/Kconfig.lsm9ds0_mfd"
sensor: add driver for MAX44009 light sensor Add device driver for MAX44009 light sensor Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX44009.pdf Jira: ZEP-357 Origin: Original Change-Id: I6b5c8e0afc36c22de0a6432d01cd5b7eb2e12f1b Signed-off-by: Baohong Liu <baohong.liu@intel.com>
2016-07-08 09:33:29 +08:00
source "drivers/sensor/Kconfig.max44009"
sensor: move driver specific options to separate Kconfig files Move driver specific config options to separate Kconfig sub-files as this is a more scalable approach when considering that multiple sensor drivers will be added in the future. Change-Id: Ia1d62afd628723be33868d6c1a956ca7b27eba88 Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-03-17 20:40:23 +08:00
source "drivers/sensor/Kconfig.mcp9808"
sensor: Add threshold trigger support for MCP9808 The MCP9808 supports threshold triggering. Add support for this feature in the driver and the sample application. If triggering is activated, the driver can create its own fiber or use the system-wide sensor fiber. Origin: Original Change-Id: Ie825a22245cb48cbdffba3049011e4d305975d53 Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
2016-02-23 23:10:20 +08:00
sensor: add driver for MPU6050 sensor Add driver to MPU6050 six-axis motion tracking device. The driver has support for accelerometer, gyroscope and temperature channels. Datasheet: http://43zrtwysvxb2gf29r5o0athu.wpengine.netdna-cdn.com/wp-content/uploads/2015/02/MPU-6000-Datasheet1.pdf Register Map: http://43zrtwysvxb2gf29r5o0athu.wpengine.netdna-cdn.com/wp-content/uploads/2015/02/MPU-6000-Register-Map1.pdf Change-Id: Id3930fc666195051093fee80c15cf2deb0eaedff Origin: Original Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-05-31 15:53:22 +08:00
source "drivers/sensor/Kconfig.mpu6050"
sensor: add driver for SHT3xD sensors Add device driver for the SHT3xD temperature and humidity sensors. Datasheets: https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/Humidity_Sensors/Sensirion_Humidity_Sensors_SHT3x_Datasheet_digital.pdf https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/Humidity_Sensors/Sensirion_Humidity_Sensors_SHT3x_Application_Note_Alert_Mode_DIS_V1.pdf Origin: Original Change-Id: I9cda2f1bc7172e93ce34fde63c6febf0b8b28289 Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-02-22 22:22:16 +08:00
source "drivers/sensor/Kconfig.sht3xd"
sensor: move driver specific options to separate Kconfig files Move driver specific config options to separate Kconfig sub-files as this is a more scalable approach when considering that multiple sensor drivers will be added in the future. Change-Id: Ia1d62afd628723be33868d6c1a956ca7b27eba88 Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-03-17 20:40:23 +08:00
source "drivers/sensor/Kconfig.sx9500"
sensors: add driver for TMP007 infrared thermopile sensor Add driver for the TMP007 intrared thermopile sensor which measures the temperature of an object without direct contact. Datasheet: http://www.ti.com/lit/ds/symlink/tmp007.pdf Origin: Original Change-Id: I29857b2e424a2144370d75e2ee40c4ff8b619afd Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-04-05 19:37:45 +08:00
sensors: add TH02 temperature sensor (Grove) Support for the Temperature&Humidity Sensor (High-Accuracy &Mini) v1.0 sensor, see: http://wiki.seeed.cc/Grove-TemptureAndHumidity_Sensor-High-Accuracy_AndMini-v1.0/ Change-Id: I439eafc863116f21e3b3385175d1935e60a5e9b1 Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-10-08 19:32:44 +08:00
source "drivers/sensor/th02/Kconfig"
sensors: add driver for TMP007 infrared thermopile sensor Add driver for the TMP007 intrared thermopile sensor which measures the temperature of an object without direct contact. Datasheet: http://www.ti.com/lit/ds/symlink/tmp007.pdf Origin: Original Change-Id: I29857b2e424a2144370d75e2ee40c4ff8b619afd Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
2016-04-05 19:37:45 +08:00
source "drivers/sensor/Kconfig.tmp007"
sensor: add driver for TMP112 temperature sensor Add device driver for the TMP112 I2C temperature sensor Datasheet: http://www.ti.com/lit/ds/slos887d/slos887d.pdf Change-Id: I08208204cd8f377dc65378aaf2b92c7cdefe8d2b Origin: Original Signed-off-by: Mariusz Ryndzionek <mariusz.ryndzionek@firmwave.com>
2016-06-18 19:14:11 +08:00
source "drivers/sensor/Kconfig.tmp112"