zephyr/boards/microchip/ev11l78a/ev11l78a.yaml

identifier: ev11l78a
name: UPD301C Basic Sink Application Example
type: mcu
arch: arm
ram: 32
flash: 64
toolchain:
  - zephyr
  - gnuarmemb
  - xtools
supported:
  - adc
  - gpio
  - i2c
  - spi
  - uart
vendor: atmel
ev11l78a: initial import of the UPD301C Basic Sink board. This board is a relatively inexpensive development kit for USB-PD controllers, using an UPD301C controller. This Zephyr config includes support for: * UART (present on he debug header of the board), tested with the hello_world sample application; * the one standalone LED (CAP_MIS), tested with the blinky sample application; * the rotary encoder (PDO_SEL), via ADC, tested with the adc sample application; * the current sense amplifier (I_SENSE), currently untested; * the SPI bus, connected internally in the UPD301C to the UPD350; * the I2C bus, exposed on the debug header, currently untested. Note that the drivers.uart.async_api.rtt has to be disabled, as it is for other m0 boards with no dma or it fails to build. Signed-off-by: Diego Elio Pettenò <flameeyes@meta.com> 2023-08-04 07:11:28 +08:00			`identifier: ev11l78a`
			`name: UPD301C Basic Sink Application Example`
			`type: mcu`
			`arch: arm`
			`ram: 32`
			`flash: 64`
			`toolchain:`
			`- zephyr`
			`- gnuarmemb`
			`- xtools`
			`supported:`
			`- adc`
			`- gpio`
			`- i2c`
			`- spi`
			`- uart`
boards: add vendor to board yaml This is coming from devicetree and corrosponds to what we have in the dts/bindings/vendor-prefixes.txt file. This will allow for static filtering, especially with twister, i.e. no need to build anything to know the vendor of a board All of the vendor data was extracted automatically from the devicetree, so some platforms might not have the right vendor or no vendor at all right now, we need to fix some of the DTS information or do this manually to get this 100% correct. But we are close. Signed-off-by: Anas Nashif <anas.nashif@intel.com> 2023-06-23 02:47:45 +08:00			`vendor: atmel`