39 lines
1.4 KiB
Plaintext
39 lines
1.4 KiB
Plaintext
# SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
|
|
#
|
|
# SPDX-License-Identifier: Apache-2.0
|
|
|
|
CONFIG_ESP_FLASH_SIZE=4MB
|
|
CONFIG_ESP_BOOTLOADER_SIZE=0xF000
|
|
CONFIG_ESP_BOOTLOADER_OFFSET=0x0000
|
|
CONFIG_ESP_MCUBOOT_WDT_ENABLE=y
|
|
# Example of values to be used when multi image is enabled
|
|
# Notice that the OS layer and update agent must be aware
|
|
# of these regions
|
|
CONFIG_ESP_APPLICATION_SIZE=0x80000
|
|
CONFIG_ESP_IMAGE0_PRIMARY_START_ADDRESS=0x10000
|
|
CONFIG_ESP_IMAGE0_SECONDARY_START_ADDRESS=0x90000
|
|
CONFIG_ESP_IMAGE1_PRIMARY_START_ADDRESS=0x110000
|
|
CONFIG_ESP_IMAGE1_SECONDARY_START_ADDRESS=0x190000
|
|
CONFIG_ESP_SCRATCH_OFFSET=0x210000
|
|
CONFIG_ESP_SCRATCH_SIZE=0x40000
|
|
|
|
# Use UART0 for console printing (use either UART or USB alone)
|
|
CONFIG_ESP_CONSOLE_UART=y
|
|
CONFIG_ESP_CONSOLE_UART_NUM=0
|
|
# Configures alternative UART port for console printing
|
|
# (UART_NUM=0 must not be changed)
|
|
# CONFIG_ESP_CONSOLE_UART_CUSTOM=y
|
|
# CONFIG_ESP_CONSOLE_UART_TX_GPIO=17
|
|
# CONFIG_ESP_CONSOLE_UART_RX_GPIO=18
|
|
# Use USB JTAG Serial for console printing
|
|
# CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG=y
|
|
|
|
# Enables multi image, if it is not defined, it is assumed
|
|
# only one updatable image
|
|
# CONFIG_ESP_IMAGE_NUMBER=2
|
|
|
|
# Enables multi image boot on independent processors
|
|
# (main host OS is not responsible for booting the second image)
|
|
# Use only with CONFIG_ESP_IMAGE_NUMBER=2
|
|
# CONFIG_ESP_MULTI_PROCESSOR_BOOT=y
|