The macro _MspSet has gone away in Zephyr. Change to use the __set_MSP
macro from the CMSIS code that has always been present. This allows
mcuboot to build with Zephyr after:
commit c028f88b37d2a033d6a85c8d365ef048e1e4d621
Author: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Date: Mon Mar 12 10:45:02 2018 +0100
arch: arm: remove redundant asm inline headers
Fixes#246.
Signed-off-by: David Brown <david.brown@linaro.org>
This patch introduced serial bootloader functionality ported
from mynewt targets tree.
For achieving this following changes were applied:
- Modified boot_serial module for using, zephyr-os modules
(crc driver, mbedtls-base64 library) and the zephyr serial adapter module
introduced recently.
- Added service of boot serial recovery mode to main.
- Adapted the input parser to using static buffers.
Default serial-boot-pin configuration was added for nrf52_pca10040
and nrf52840_pca10056 boards.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add reference counting to the flash areas, and a zephyr-only routine
which warns when areas are still open when none should be. Call the
warn routine right before chain-loading.
This prints warnings due to code in loader.c. Future work will be
needed to clean this up.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Use flash_device_base() in the boot code to compute a real address,
given the offset returned by boot_go().
Provide an implementation on mynewt that preserves existing
behavior. If mynewt needs to support devices with nonzero flash base
addresses, this can be migrated to the core OS.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
The boot response returns a flash offset, not a flash address. This is
causing confusion and leading to crashes on some platforms which don't
have flash at address 0.
Rename the field to make it more clear what its purpose is; future
patches can start fixing up usages.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Add reference counting to the flash areas, and a zephyr-only routine
which warns when areas are still open when none should be. Call the
warn routine right before chain-loading.
This prints warnings due to code in loader.c. Future work will be
needed to clean this up.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Use flash_device_base() in the boot code to compute a real address,
given the offset returned by boot_go().
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
The boot response returns a flash offset, not a flash address. This is
causing confusion and leading to crashes on some platforms which don't
have flash at address 0.
Rename the field to make it more clear what its purpose is; future
patches can start fixing up usages.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
The original Zephyr platform support files use tabs for indentation
(to match the Zephyr project). Since this code is all together, and
will be used as the basis for other platforms, fix this indentation to
match that used by the rest of mynewt.
This change is clean with respect to "git show -b", and only changes
the indentation of the beginning of lines.
MCUBOOT_TARGET_CONFIG is included in several places now,
not just boot/zephyr/main.c. This seems likely to continue.
Let's avoid trouble and make it a real header file, target.h, that
pulls in MCUBOOT_TARGET_CONFIG. That done, include target.h instead
everywhere MCUBOOT_TARGET_CONFIG is included.
This will make it easier to provide values at an SoC/family level
later. We can expect different Zephyr boards to have the same SoC and
thus likely the same mcuboot flash layout, so this will avoid
duplication.
All supported boards are compile-tested.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Avoid clock related interrupts before jumping into the first image. Safe
to disable as the first application will enable the clock/timer again
once booted.
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Commit 7238f51 ("zephyr: add support for x86 booting method")
introduced a backend-specific do_boot() function. On ARM, this casts
to an undefined type 'struct vector_table*'. Fix this by using the
'struct arm_vector_table*' introduced in that patch.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Now that mcuboot has its own logging subsystem, use that instead.
Note that this changes the domain from "[BOOTLOADER]" to "[MCUBOOT]".
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Zephyr now supports moving the vector table for Corext M* targets.
Let's remove this code from mcuboot as this has been changed
upstream and breaks mcuboot build.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Move the board specific configurations into its own header file, which
can now be created per board, once it gets tested and validated by the
bootloader.
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
The Zephyr build systems makes some assumptions about the directory
layout, and encounters problems if the necessary path contains "../..".
To help this, place the zephyr directory next to the bootutil directory
so that the Makefile can just refer to "../bootutil". This keeps all of
the build artifacts under the proper top-level directory.
David Brown