For zephyr-rtos:
K_sleep() is not available when multithreading is disabled.
Let's use k_busy_wait() in that case.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The last data packet might be non aligned to multiple of
the flash write-block-size. This cause that the `image upload`
mcumgr command mighty fail if the device flash driver doesn't
support one-byte write-block-size.
This patch complements the last write operation to aligned chunk
so it meet the requirements.
Added check for ensure than received data chunk doesn't
cross expected image size.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Was 3, but mcumgr sometimes sends 2 ("off" + "data", "len" is not needed
when "off" != 0). Reduce to 1 to avoid the problem, since the code
has other checks to catch this.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
The variable `dec_off` can possibly be uninitialized in this function.
As long as the serial protocol used is formed correctly, the
initialization will always happen. Place an initialization upon
function entry to protect against a case where a malformed protocol is
able to provoke this variable being used before being initialized.
Signed-off-by: David Brown <david.brown@linaro.org>
Generated serial_recovery_cbor.c and serial_recovery_cbor.h
Copied cbor_decode.c and cbor_decode.h
This commit is the result of running
./regenerate_serial_recovery_cbor.sh "2020 Nordic Semiconductor ASA"
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
- Add the cddl_gen repository as a submodule.
- Add a CDDL description file for the serial recovery packets to be
decoded.
- Add generated code files and cddl_gen's CBOR library to CMakeList.txt
for Zephyr.
- Convert boot_serial.c to use the new code.
- Add a bash script to (re)generate code files using cddl_gen.py.
Serial recovery should work exactly as before, but the binary should be
about 1k smaller.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Zephyr will soon no longer add the drivers subdirectory of the include
hierarchy to the search path, so references to driver headers must
include the drivers/ prefix.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
In zephyr code-base some generic include patches
and defines had been deprecated since a while.
This condition was maintained until zephyr v2.1.0 inclusive.
Recently these deprecated items were removed completely from
the zephyr master branch. Zephyr current SHA of this patch is
e124c1cd34938f02bbe879533c6bd29b5ff53707
This patch switch mcuboot to using most recent items.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The boot_serial test was failing build because it hadn't been updated to
use new multi-image flash area nomenclature. This fixes the build.
Signed-off-by: Fabio Utzig <utzig@apache.org>
This updates `image list` and `image upload` objects to support
multi-images. The information about which image is being handled was
added to the CBOR as "image" field, which when not available, is
considered to have value 0.
Signed-off-by: Fabio Utzig <utzig@apache.org>
The boot loader state currently exists as global variable (boot_data)
which is accessed by all routines; this updates all routines that
require access to the state to receive it by parameter.
Variables that are declared as "static" (globals) were #ifdef'ed to
only use static when building a native bootloader, to avoid stack
allocation. When bootutil is built to run in the simulator they are
stack allocated to avoid thread share.
Signed-off-by: Fabio Utzig <utzig@apache.org>
Currently to determine which image is being operated on, there is a global
variable called current_image which is used by most macros and APIs to
correctly access the flash areas required by the bootloader. This moves
this variable to the already existing state struct and refactors all
macros and APIs to receive the current image by parameters. To maintain
compatibility some of the macros were not updated and use image 0 when
called.
The definitions of FLASH_AREA_IMAGE_PRIMARY and FLASH_AREA_IMAGE_SECONDARY
for Mynewt compatibility were moved out of bootutil sources to a Mynewt
specific include file.
Signed-off-by: Fabio Utzig <utzig@apache.org>
These unit tests were failing with build errors such as this:
boot/boot_serial/test/src/testcases/boot_serial_img_msg.c:64:26: error: use of undeclared identifier 'FLASH_AREA_IMAGE_PRIMARY'
rc = flash_area_open(FLASH_AREA_IMAGE_PRIMARY, &fap);
^
The `FLASH_AREA_IMAGE_{PRIMARY,SECONDARY} definitions were not visible
because `MCUBOOT_MYNEWT` was not getting defined in the boot_serial
unit test package.
This commit defines `MCUBOOT_MYNEWT` in the boot_serial unit test
package, and adds the necessary include to pull in the PRIMARY /
SECONDARY definitions.
Signed-off-by: Christopher Collins <ccollins@apache.org>
This change replaces the slot 0/1 terminology with primary/secondary
slot and replaces FLASH_AREA_IMAGE_0/1 with
FLASH_AREA_IMAGE_PRIMARY/SECONDARY. This naming convention may be more
understandable, fits better to MCUs with multiple images and it is an
architecture agnostic alternative as well.
Change-Id: I655a585f6ae023852c671ee6635399efe25209c9
Signed-off-by: David Vincze <david.vincze@arm.com>
Signed-off-by: David Brown <david.brown@linaro.org>
zephyr macro min() was hanged to MIN()
Kconfig key CDC_ACM_PORT_NAME was changed to CDC_ACM_PORT_NAME_0
zephyr sha of the fixing time is 406dc2cb0e2868392f444677ace416440695829f.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
A recent change in the Mynewt repo
(b10cbea5ef882e7f91d1c34ffcf2506d3e183003) imposes the LOG API
requirement on the `sys/mfg` package. To fix broken builds, make the
Mynewt app and test package depend on `sys/log/stub`.
Signed-off-by: Christopher Collins <ccollins@apache.org>
The crc16.h header has been deprecated in Zephyr.
Update include directive to use the new header.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
The old log subsystem has been deprecated in Zephyr.
Migrate to the new subsystem to avoid compilation warnings.
In-place log processing is selected as it is required as MCUBoot is
one thread application.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
It is possible that while flash was erased progressively
the flash image status page was not erased.
This patch check this case and performs additional eras
if it was required.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This commit adds the option to erase flash pages while receiving
the firmware, opposed to bulk-erasing the whole image area at
the beginning of the DFU process. This is required on some
hardware that has long erase times, to prevent a long wait
and possibly a timeout during DFU.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
For zephyr it was possible to make buffer overflow while decoding
incoming base64 sting. This patch correct the available
buffer size transferred to base64 decoding function, which mitigate the
issue.
Clean up boot_serial_start function from unwanted
execution constant pointers.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
- Remove dependency to sprintf()
- Remove dependency to cborattr
- mynewt: replace console with more direct interface to uart
- mynewt: settings to reduce included os code
Signed-off-by: Marko Kiiskila <marko@runtime.io>
This removes settings of log level on a per file basis. The log level
should be set by the global config, while per file log configuration can
still be set, don't enforce them.
Signed-off-by: Fabio Utzig <utzig@apache.org>
The patch introduce usage of zephyr flas_map module instead
of mcuboot zephyr-only implementation. Unused flash_area_to_sectors
API of former flash_map was removed as well.
Size of sector-status-update-map entry is now defined thanks to the
minimum write size supported by the flash driver.
For avoid ambiguity former zephyr-only files flash_map.c
were renamed to flash_map_extended.c (its code now implements
only addition to this what zephyr flash_map implements).
flash_map.h header include is now warped by flash_map_backedn.h headre
because implementations and include pathes are diferent in Zephyr and Mynewt.
Usage of hal_flash_align() were replaced by usage flash_area_align().
This provide consistency between MyNewt and Zephyr implementation as
this API is available in both RTOSes.
flash_map.h was moved to the simulator c-support files as now missing in
the boot/zephyr subdirectories.
f. boot_scratch_fa_device_id was removed as unused.
f. boot_img_fa_device_id was and expanded the only use of it
(on loader.c).
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The unit tests depend on a few Mynewt packages (`test/testutil` and
`sys/console/stub`). If there is no repo prefix in the dependency
specifier, newt assumes the package is in the local repo (mcuboot)`.
This commit adds the `@apache-mynewt-core/` prefix to these
dependencies.
Signed-off-by: Christopher Collins <ccollins@apache.org>
Following warnings were fixed within this patch:
'isspace' macro should take an int value
function 'bs_reset' should return void
redefinition of 'MBEDTLS_CONFIG_FILE' macro while
it is already defined by the zephyr build system.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Zephyr has build-in tinycbor code of version which doesn't
require newlib-c by default. Also the cborattr module is now
taken form the zephyr code.
This patch decrease flash consumption by 10 KB for serial recovery build.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This fixes an issue found on stm32f3 where newtmgr after writing an odd
sized packet, would hardfault on the next write due to trying to write an
odd address which is not valid on stm32f3 flash.
Signed-off-by: Fabio Utzig <utzig@apache.org>
This patch introduced serial bootloader functionality ported
from mynewt targets tree.
For achieving this following changes were applied:
- Modified boot_serial module for using, zephyr-os modules
(crc driver, mbedtls-base64 library) and the zephyr serial adapter module
introduced recently.
- Added service of boot serial recovery mode to main.
- Adapted the input parser to using static buffers.
Default serial-boot-pin configuration was added for nrf52_pca10040
and nrf52840_pca10056 boards.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Andrzej Puzdrowski