While building with Zephyr 1.12 for the nucleo_f091rc I got undefined
reference to __set_MSP() during linking. Including soc.h fixes the
problem. Thanks carlesc.
Signed-off-by: Evan Gates <evan@gnarbox.com>
This fixes an issue where the bootloader is activating a timer that is
later not used by the installed target image causing a non handled interrupt
fault.
Signed-off-by: Fabio Utzig <utzig@apache.org>
The `--included-header` was "mandatory" when using imgtool with firmware
images generated by the Zephyr build system and it was a source of
issues when it was forgotten. This removes `--included-header` and adds
a new parameter `--pad-header` with inverted semantics, to be used only
when a zeroed header is required to be added to the firmware image.
Signed-off-by: Fabio Utzig <utzig@apache.org>
It was possible that free_queue locks on the self referencing
node.
This patch introduce check for this issue
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
For zephyr it was possible to make buffer overflow while decoding
incoming base64 sting. This patch correct the available
buffer size transferred to base64 decoding function, which mitigate the
issue.
Clean up boot_serial_start function from unwanted
execution constant pointers.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Due to an issue described here:
https://github.com/zephyrproject-rtos/zephyr/issues/8393
interrupts are not enabled when multithreading is disabled.
Enable interrupts to allow the serial recovery mode UART to receive
characters.
Note: This commit must be reverted once the issue is addressed.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The k_fifo_* primitives are not available when multithreading is
disabled. Use sys_slist_* instead.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Power management requires multithreading and other kernel features that
are disabled in MCUboot, so disable it to avoid interrupts being
confused by power management code wrappers.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
- Remove dependency to sprintf()
- Remove dependency to cborattr
- mynewt: replace console with more direct interface to uart
- mynewt: settings to reduce included os code
Signed-off-by: Marko Kiiskila <marko@runtime.io>
For serial recovery enabled Assertions conditions were improperly
which cause runtime assertion whenever __ASSERT macro was enabled
along with the serial recovery mode running.
This patch fixes the issue.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Overwrite only requires just magic + image_ok + copy_done. This fixes
issues generating images in overwrite only mode when the firmware image
is too big and overflows the swap status area.
Signed-off-by: Fabio Utzig <utzig@apache.org>
The swap status area is used to maintain information that allows
recovery when interrupted in the middle of a swap. This area has no
usefulness when doing a overwrite-only upgrade, which always copies the
entire slot.
Signed-off-by: Fabio Utzig <utzig@apache.org>
In order to provide a pleasant out-of-the-box experience to users,
default to the RSA .pem file so that users do not get a cryptic error
when building with the default .conf file in upstream.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add the new `--slot-size` and make `--pad` a bool flag, to allow
checking that firmware fits in the slot without overflowing into the
trailer region even when no padding was requested.
Fixes#241
Signed-off-by: Fabio Utzig <utzig@apache.org>
The hardcoded keys for Zephyr were removed and external references were
added for the built time autogenerated variables. A hardcoded key file
was added specifically for the simulator.
Signed-off-by: Fabio Utzig <utzig@apache.org>
For both RSA (which uses Zephyr's mbedTLS copy) and ECDSA (which uses
our own for ASN1 parsing) use the common "mcuboot-mbedtls-cfg.h" header
file instead of relying on the default config.h bundled with mbedTLS.
Additionally issue a descriptive error when CONFIG_MBEDTLS is set and we
are building with our own copy.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This adds a new command line flag to allow passing in the max number of
sectors for a swap when the image is padded. It defaults to 128 and
should match the value configured in the bootloader.
Fixes#285
Signed-off-by: Fabio Utzig <utzig@apache.org>
This removes settings of log level on a per file basis. The log level
should be set by the global config, while per file log configuration can
still be set, don't enforce them.
Signed-off-by: Fabio Utzig <utzig@apache.org>
For Mynewt when no logging (default option) or serial boot was selected,
avoid initializing all serial supporting system. This enables to save
flash space when only basic bootloader functionality is used.
Signed-off-by: Fabio Utzig <utzig@apache.org>
Now bootutil_log.h was converted to use per platform logging primitives
defined according to documentation established on the template file.
Some "null" macros were left to avoid breaking per source logging level
definition when MCUBOOT_HAVE_LOGGING was not defined.
Signed-off-by: Fabio Utzig <utzig@apache.org>
New logging macros were added for all supported platforms, following the
documentation defined in the template config file.
Signed-off-by: Fabio Utzig <utzig@apache.org>
Zephyr has changed the format of macros used to define flash
area partitions -- they no longer contain the `_0` suffix.
Signed-off-by: Kiril Zyapkov <kiril.zyapkov@gmail.com>
These (currently) trivial files do not add license headers. Go ahead
and add the boilerplate Apache header.
In addition, I've also added an SPDX header. Although this is a first
for the MCUboot project, this will provide a template for adding these
headers to other files.
Fixes#282
Signed-off-by: David Brown <david.brown@linaro.org>
CC: Marti Bolivar <marti@opensourcefoundries.com>
CC: Fabio Utzig <utzig@apache.org>
This patch isolates mcuboot settings under `MCUBoot`
menu in menuconfig view. This improves legibility.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The patch introduce usage of zephyr flas_map module instead
of mcuboot zephyr-only implementation. Unused flash_area_to_sectors
API of former flash_map was removed as well.
Size of sector-status-update-map entry is now defined thanks to the
minimum write size supported by the flash driver.
For avoid ambiguity former zephyr-only files flash_map.c
were renamed to flash_map_extended.c (its code now implements
only addition to this what zephyr flash_map implements).
flash_map.h header include is now warped by flash_map_backedn.h headre
because implementations and include pathes are diferent in Zephyr and Mynewt.
Usage of hal_flash_align() were replaced by usage flash_area_align().
This provide consistency between MyNewt and Zephyr implementation as
this API is available in both RTOSes.
flash_map.h was moved to the simulator c-support files as now missing in
the boot/zephyr subdirectories.
f. boot_scratch_fa_device_id was removed as unused.
f. boot_img_fa_device_id was and expanded the only use of it
(on loader.c).
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
`create` as alias to `sign` was defined in the arg parsing, but was not
functional because it was missing the subcommands call dict. This makes
`create` call the `sign` method.
Signed-off-by: Fabio Utzig <utzig@apache.org>
This removes the old "TLV size" and "keyId" fields that used to exist
in the old image header format and updates it to use `load_addr`. Also
fixes the name of reserved fields to index from 1.
This fixes#279
Signed-off-by: Fabio Utzig <utzig@apache.org>
The unit tests depend on a few Mynewt packages (`test/testutil` and
`sys/console/stub`). If there is no repo prefix in the dependency
specifier, newt assumes the package is in the local repo (mcuboot)`.
This commit adds the `@apache-mynewt-core/` prefix to these
dependencies.
Signed-off-by: Christopher Collins <ccollins@apache.org>
The README file is missing extra information about how to run all the
different test configurations; add this in.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Continue removing platform-specific conditional compilation from
bootutil by adding a new MCUBOOT_HAVE_ASSERT_H configuration option
and associated header file. Right now, that's only used by the
simulator.
That leaves just bootutil_log.h with platform-specific contents, but
since it's meant to be an abstraction layer for logging, we'll let it
stand for now.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Take the opportunity to clean up a bit of platform cruft that has
gotten into bootutil by moving it to mcuboot_config.h, and ensuring it
is documented in the template config file.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
This allows us to delete all the remaining compiler command line
configuration from CMakeLists.txt.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Finish the job of removing the CONF_xxx fields from CMakeLists.txt by
using the Kconfig symbol from the application runner configuration macro.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Handle CONFIG_BOOT_UPGRADE_ONLY in mcuboot_config.h, and switch the
release test Makefile to using an OVERLAY_CONFIG fragment.
This removes the last user of the Makefile BOOTLOADER_CONFIG variable,
so delete it as well.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Handle CONFIG_BOOT_VALIDATE_SLOT0 in mcuboot_config.h, and switch to
setting it with an OVERLAY_CONFIG fragment in the test Makefile.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Evan Gates