Update the dependencies in the main sim to the latest versions. There
are some minor changes in a few of the packages, and a fairly
significant change to the aes. The aes_ctr crate has been merged into
the aes crate, along with some changes to how it initialized.
Signed-off-by: David Brown <david.brown@linaro.org>
This commit fixes following issue:
One of parameters in comparison using fih_eq() was not of fih_int
type which caused build error when medium or higher FIH mode is enabled.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Disable certificate verification for developer.arm.com to avoid
certificate issues when installing arm embedded tools to build Mynewt.
Signed-off-by: Fabio Utzig <utzig@apache.org>
This commit adds a utility class that is available when building an application booted by mcuboot with MCUBOOT_DATA_SHARING enabled.
This utility class, `DataShare`, allows the application to iterate through the shared memory region and get each entry stored there.
Signed-off-by: George Beckstein <george.beckstein@gmail.com>
This patch make possible MCUBOOT_BOOTUTIL to integrate the
hook file on their own. This is intended to support hook while
the library is just part of the application.
The hooks file for the MCUboot build is now included in the same manner.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Change enables multi-image DFU in Thingy:53 configuration.
The network core cannot access external flash directly. The flash
simulator must be used to provide a memory region that is used to
forward the new firmware to the network core.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
The Travis tests build MCUboot against a specific version of TF-M, which
it no longer works with. Newer versions of TF-M seem to not support the
mps2/an521 target that the tests don't build that way either.
Until these tests can be fixed, just disable all of them. Future
possibilities include fixing the issues between TF-M and MCUboot, or
making these tests able to run within Zephyr.
Signed-off-by: David Brown <david.brown@linaro.org>
The dependency, in Kconfig, blocked usage of the ENABLE_MGMT_PERUSER
with other BOOT_SERIAL_ device options.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Change introduces default configuration of MCUboot for Thingy:53
secure cpuapp. The default configuration also disables image
revert on application core.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Move CDC ACM UART node from common DTC overlay to
specific overlays, nrf52840_big.overlays and
usb_cdc_acm.overlays.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Adapt to Zephyr OS changes to get CDC ACM UART device.
Remove RECOVERY_UART_DEV_NAME Kconfig option and
use DEVICE_DT_GET() in serial_adapter.c
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Example (very basic) hook implementation.
Added case description for test-build with these hooks
and multi-image feature.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Introduced boot_img_install_stat_hook() hook fuinction for fetch
the image's slot installation status.
The image's slot installation status is custom property.
It's detailed definition depends on user implementation. It is only
defined that the status will be set to 0 if this hook not provides
another value.
Inserted available hook for read image header as well.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Added hook for: read image header, validate the image and hook
which is called after image was uploaded completely.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Added hook which allows to override boot_read_swap_state_by_id()
routine for the primary slot.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Added hook for read image header.
Added hook which is for inject an image check implementation which can
be used instead of boot_image_check() internal implementation on a primary
slot.
This is usefully especially when primary has to be checked by other entity
on MCUboot's demand.
Added hook which allow to implement image update process
differently.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
If user generate project and the will try to switch signature type
then it is very likely that MBETLS will be enabled simultaneously when
tinycrypt has to be force-selected, which causes kconfig warning on
impossible configuration. Such configuration won't be possible to be
fixed using menuconfig etc.
This patch moves dependency check on !MBEDTLS from kconfig to preprocessor
which makes manual fixing using menuconfig possible.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This commit adds an include clause to "boot_record.h" to include the stddef.h header that contains the declaration of the "size_t" type.
Attempting to include "boot_record.h" in a build for Mbed-OS would throw an error complaining "size_t" was unknown, adding a note to inculde "stddef.h"
Signed-off-by: George Beckstein <george.beckstein@gmail.com>
So in PR #1089 I misaligned the `#else` used for the `irq_lock` as it
should be aligned with `CONFIG_MCUBOOT_CLEANUP_ARM_CORE`. So that
`irq_lock`is called when we don't call `__disable_irq` from arm core
clean up code.
Signed-off-by: Sigvart Hovland <sigvart.hovland@nordicsemi.no>
USB device support configuration is revised,
CONFIG_USB option is deprecated.
Only USB_DEVICE_STACK option should be used to
enable USB device support.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Change fixes encoding data length and adds support for big endian
byte ordering. According to specification, data length can be
encoded either on 1, 2, 4 or 8 bytes.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
The commit modifies CMakeLists.txt to include the file into compilation
only when CONFIG_ENABLE_MGMT_PERUSER is selected.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds Kconfig option that enables the storage erase mgmt
command.
Addition of the Kconfig option fixes the problem where Zephyr spcyfic
mgmt commands support fails to compile when board does not define
a storage partition.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This reverts commit 78e4441bd3.
Although it shouldn't, this change is provoking numerous errors in
CI. In order to allow CI to continue, revert this change, and it can be
redone later, after fixing whatever is causing the CI build failures.
Signed-off-by: David Brown <david.brown@linaro.org>
Instead of requiring cargo to be run in the sim directory, create a
top-level "workspace" Cargo file, that references the others. The main
result of this is that cargo can now be run in the top of the workspace,
and the 'target' directory will be placed there, rather than in the sim
directory.
This is primarily of benefit to tools such as RLS, Rust-analyzer and
various IDEs that expect a crate at the top level of the tree.
Signed-off-by: David Brown <david.brown@linaro.org>
The old mbed CLI 1 tool, currently used to compile the MCUboot port for
Mbed™ OS, compiles all files unless otherwise specified in .mbedignore.
The espressif directory in the boot folder was added to the ignore file
to prevent failed builds.
Signed-off-by: Sudarshan Sreeram <sudarshan.sreeram@arm.com>
Signed-off-by: David Brown <david.brown@linaro.org>
`irq_lock()` sets `BASEPRI_MAX` aka. the `BASEPRI` mask to whatever
zephyr has configured it to be by the value of `_EXC_IRQ_DEFAULT_PRIO`.
However by calling arm_cleanup() we also do the call to
`__disable_irq()` setting the PRIMASK to 1. Meaning the only exceptions
we can recive is fault exceptions. Masking out more exceptions does not
really make sense.
Sometimes applications booted by MCUBoot will not expect the `BASEPRI`
to be set to something else than 0(No effect). Meaning if they depend on
using some exception which now is masked out by `BASEPRI` they will
fail.
Signed-off-by: Sigvart Hovland <sigvart.hovland@nordicsemi.no>
When no dynamic memory is used, there is no need for include "os/malloc.h",
and do so will force the user to create an empty "os/malloc.h" file.
Signed-off-by: Carlos Falgueras García <carlos.falgueras@wslw.es>
David Brown