Change enables multi-image DFU in Thingy:53 configuration.
The network core cannot access external flash directly. The flash
simulator must be used to provide a memory region that is used to
forward the new firmware to the network core.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Change introduces default configuration of MCUboot for Thingy:53
secure cpuapp. The default configuration also disables image
revert on application core.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Move CDC ACM UART node from common DTC overlay to
specific overlays, nrf52840_big.overlays and
usb_cdc_acm.overlays.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Adapt to Zephyr OS changes to get CDC ACM UART device.
Remove RECOVERY_UART_DEV_NAME Kconfig option and
use DEVICE_DT_GET() in serial_adapter.c
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Example (very basic) hook implementation.
Added case description for test-build with these hooks
and multi-image feature.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
USB device support configuration is revised,
CONFIG_USB option is deprecated.
Only USB_DEVICE_STACK option should be used to
enable USB device support.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Added configuration for emulate the secondary image flash.
Thanks to that it is easy to test mcuboot behavior while
the secondary flash device stop working.
Need additionally to modify the zephyr/drivers/flash/flash_simulator.c
driver, soflash_sim_read() always returns an error e.g: -EINVAL.
For building mcuboot use following comand-line:
west build -d build/mcuboot_y -b nrf52840dk_nrf52840 \
bootloader/mcuboot/boot/zephyr/ -- \
-DDTC_OVERLAY_FILE=./boards/nrf52840dk_ram.overlay \
-DOVERLAY_CONFIG=./boards/flash_sim_driver.conf
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The mimxrt1060_evk and mimxrt1064_evk boards have large slots so we need
to increase CONFIG_BOOT_MAX_IMG_SECTORS from the default.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Add configuration and DTS overlays to run MCUboot + smp_svr on the
nrf52840dk using the secondary slot in the external QSPI NOR flash.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Add support for the pinnacle_100_dvk board.
The Pinnacle 100 modem slot 1 partition
is located in external QSPI.
Add a board file overlay to enable QSPI flash.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Added configuration for build in Zephyr-RTOS CI MCUBoot
in CONFIG_SINGLE_APPLICATION_SLOT=y mode.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Update CONFIG_FLOAT to CONFIG_FPU which has been renamed in zephyr.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The STM32L475 needs BOOT_MAX_IMG_SECTORS equal 256 to work properly.
This add a config file to change default value from 128 to 256 once
there isn't a proper way to handle using Device Tree.
fixes zephyrproject-rtos/zephyr/issues/24243
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Board was renamed here:
zephyrproject-rtos/zephyr#24049
Patch aligns the name in MCUBoot.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Board was renamed here:
https://github.com/zephyrproject-rtos/zephyr/pull/23524/
Patch aligns the name in MCUBoot and decouples one of nrf52840 dedicated
overlay from exact board name.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Name of the board is changing in the zephyr-rtos:
https://github.com/zephyrproject-rtos/zephyr/pull/23447
This patch aligns the board name used which is required for suppression
of build warnings.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Modified serial_adapter so log are allowed when using USB
CDC ACM serial port emulation.
Added dedicated thread for log processing of the highest application
priority. This allows to transmit all logs without adding k_sleep
anywhere else int the code.
Introduced boot log thread is simpler than the default log threat
which decreases flash footprint by a few dozen bytes.
Added configuration for nrf52840_pca10056 which shows how
to enable looging along with USB - among other, thread log
processing is required.
build command (form zephyr-project root directory)
west build -d build/mcuboot/nrf52840_pca10056 -b nrf52840_pca10056
./bootloader/mcuboot/boot/zephyr/
-- -DDTC_OVERLAY_FILE=./boards/nrf52840_pca10056_big.overlay
-DOVERLAY_CONFIG=./usb_cdc_acm_log_recovery.conf
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
CONFIG_MULTITHREADING is generally assumed to be y by the zephyr
kernel, even though that's not reflected in the Kconfig. For example,
semaphores depend on it being y, but CMake will still build sem.c even
if it's n.
The sensible default for this option is thus y.
However, it's a size advantage to disable it if the platform drivers
are all aware of this option, such as nRF.
Let's re-work our use of this option to keep it disabled when we know
it's safe, but enable it by default so more platforms can be expected
to work out of the box.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
The build overflows by 100B using the 7-2018-q2-update GNU Arm
Embedded toolchain. Turn on size optimizations; this leaves about 19%
of the partition's flash available for MCUboot to grow into.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
The removal of CONFIG_BOOT_HAVE_LOGGING in 15aa6ef ("zephyr: remove
BOOT_HAVE_LOGGING Kconfig option") missed some uses. In particular,
the one in mcuboot_config.h that converts Kconfig options to MCUboot's
platform-agnostic configuration macros.
This broke logging even when the relevant Kconfig options were on.
Fix things up by using CONFIG_LOG instead.
Tested logging works again on nrf52840_pca10056. Build tested
nrf51_pca10056 to make sure it still fits. The nrf52840_pca10059 build
overflows flash by 0.16%, but that was a problem before 15aa6ef.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
The logger issue on Xtensa is resolved in mainline Zephyr with
239805b2d82aebee4969c3ae57fbf8025c4fb60d. Hence logging can be
enabled now.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Cleaned up the conf file for intel_s1000_crb by defining only
those values that are different from prj.conf.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Disable logging and enable size optimizations on
nrf51_pca10028 target in order to fit in boot slot size
for out-off-the-box build.
fixes#411
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The board cannot output logs on the UART because it is used
by MCUBoot's serial recovery for DFU. Remove logging and
the RTT console from project defaults.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
The old log subsystem has been deprecated in Zephyr.
Migrate to the new subsystem to avoid compilation warnings.
In-place log processing is selected as it is required as MCUBoot is
one thread application.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This commit adds a project configuration for the upcoming
nrf52840_pca10059 board.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The Zephyr CMakeLists.txt uses its own logic to have board-specific
overlays, named boards/${BOARD}.prj. However, the only overlay file we
have, arduino_101.conf, isn't in this boards directory, and this target
doesn't build.
Fix this by moving the target into the right directory. Fixes#188.
Signed-off-by: David Brown <david.brown@linaro.org>
Marek Pieta