Use socs folder to configure Espressif targets.
Remove all boards confs which was created by copying other boards.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
MX25UM flash on rd_rw612_bga is very large (8MB), so we must increase
the number of max sectors when targeting this board with MCUboot
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Adds default Kconfig configuration that allows to build MCUboot
for NRF54L.
Currently this configuration turns off WDT and FPROTECT,
which is TODO to fix.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Signed-off-by: Mateusz Michalek <mateusz.michalek@nordicsemi.no>
Add support for ESP32xx_luatos_core targets to build
as Zephyr application.
This target is simular to esp32 devkitm,
copy conf file from esp32xx_devkitm
Signed-off-by: YuLong Yao <feilongphone@gmail.com>
Fixes USB configurations so that they build out of the box, this
previously falsely built successfully but would not run
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Make MINIMAL_LIBC as default for MCUboot app build instead
of picolibc. Footprint is lower and no need to
MULTLTHREADING enabled for SoC build.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
This is a follow-up on upstream Zephyr split from `esp32` to distinct
esp32_devkitc_wroom and esp32_devkitc_wrover (see [1] and [2]).
[1] https://github.com/zephyrproject-rtos/zephyr/pull/58454
[2] 3776402f40
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Removes the old deprecated Kconfig items for configuring GPIO ports
and pins for entering serial recovery/USB DFU mode. These were
deprecated almost a year ago and should not be used as device tree
has long replaced them.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Add support for RT595 to MCUBoot. A larger number of max sectors is
required due to the large flash size present on the RT595 EVK.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Removed the board configuration for Thingy:53 Application Core as it
contains references to the Kconfig modules that are not available in
the upstream Zephyr. The current configuration is set up to work
in the nRF Connect SDK environment and should be moved there.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Change removes the legacy configuration. The legacy configuration
became problematic, because GPIO DTS nodes no longer support labels
that were used to identify nodes in MCUboot. Therefore we need to
use GPIO DTS node name with the legacy approach.
The GPIO should be configured by board's DTS, which is simpler.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Enable tests to be run on frdm_k64f and disco_l475_iot1. The l475 uses
the STM32 IWDG by default, and the k64f can be used for the generic
watchdog path. Both boards also received a config to enable the
watchdog.
Signed-off-by: Fabio Utzig <utzig@apache.org>
zephyr is transition away from devicetree label property for nodes
that are associated with devices. So remove it from flash nodes.
Signed-off-by: Kumar Gala <galak@kernel.org>
zephyr is transition away from devicetree label property for nodes
that are associated with devices. So remove it from
"zephyr,cdc-acm-uart" nodes.
Signed-off-by: Kumar Gala <galak@kernel.org>
This patch removes CONFIG_BOOT_IMAGE_ACCESS_HOOKS_FILE option
which was used to point to hooks implementation file.
It is better that the project customization is up to add required
files instead. This gives more flexibility in provisioning these
sources (there may be multiple files).
This also simplifies Kconfig options.
In order to keep possibility for build-test the Hooks feature
hooks_sample.c will be included into the build if commandline
will specify -DTEST_BOOT_IMAGE_ACCESS_HOOKS=Y option.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Sine https://github.com/zephyrproject-rtos/zephyr/pull/47629 was
merged the qspi nod driver is enabled by default. This cause unwanted
flash footprint rise for configurations which are not using the qspi.
This patch disables it back.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
add support for RT1170 and RT1160 CM7 cores, which have large flash
sizes and require an increase to the value of BOOT_MAX_IMG_SECTORS
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
RT1050 and 1060 have large flash chips, so tools like MCUMgr will time
out if the entire flash bank is erased before writing data. Enable
progressive erase for these boards to prevent timeouts.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Change disables CONFIG_USB_DEVICE_REMOTE_WAKEUP, because it is not
supported by the MCUboot bootloader source code.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
CONFIG_SYSTEM_CLOCK_DISABLE property was removed from
zephyr codebase. It is not needed anymore since the empty
sys_clock_disable() callback is provided if the platform
doesn't support system clock disable capability.
Reference:
78dc8ce338
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The mimxrt685_evk board has large slots so we need to increase
CONFIG_BOOT_MAX_IMG_SECTORS from the default.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Removed old external flash configs for Thingy53.
Signed-off-by: Ole Sæther <ole.saether@nordicsemi.no>
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The mimxrt1024_evk board have a large slot so we need
to increase CONFIG_BOOT_MAX_IMG_SECTORS from the default.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@prevas.dk>
CONSOLE_HANDLER is not needed for MCUboot configuration for
doing anything. Also not need to disable others CONSOLE's properties
if CONSOLE=n.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The mimxrt1020_evk and mimxrt1050_evk_qspi boards have large
slots so we need to increase CONFIG_BOOT_MAX_IMG_SECTORS from
the default.
Signed-off-by: Xabier Marquiegui <xmarquiegui@ainguraiiot.com>
Change enables multi-image DFU in Thingy:53 configuration.
The network core cannot access external flash directly. The flash
simulator must be used to provide a memory region that is used to
forward the new firmware to the network core.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Change introduces default configuration of MCUboot for Thingy:53
secure cpuapp. The default configuration also disables image
revert on application core.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Move CDC ACM UART node from common DTC overlay to
specific overlays, nrf52840_big.overlays and
usb_cdc_acm.overlays.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Marek Matej