Use socs folder to configure Espressif targets.
Remove all boards confs which was created by copying other boards.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
check_config.h was included manually by custom configuration files.
This caused compilation errors when updating MbedTLS to 3.6.0
because check_config.h was processed too early, before the whole
configuration is defined, effectively causing configuration check errors.
MbedTLS already takes care of including check_config.h at the right time.
Remove those erroneous manual check_config.h includes.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
This change uses the flash functions to read the applications
reset vector. This allow flexibility on which flash device the
application is programmed.
For e.g: MCUBoot can be programmed and running from Internal
Flash while Zephyr can be loaded from a different Flash device.
This change is made for ARM platform, it can be extended to
non-ARM platforms as well.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Fixes an issue whereby the instruction and data caches being
disabled before booting code had bit-rotted and no longer worked,
adds a new Kconfig that allows this option to be turned off if
wanted.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
MX25UM flash on rd_rw612_bga is very large (8MB), so we must increase
the number of max sectors when targeting this board with MCUboot
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Fixes an issue with the estimated size calculation which wrongly
used the maximum align size for some multiplications, this would
mean that in some instances the estimated maximum image size was
smaller than the actual allowed size
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
The defines have been taken from the Zephyr flash_map.h
but as they are provided there for MCUboot only, they can be just
defined here.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Adds default Kconfig configuration that allows to build MCUboot
for NRF54L.
Currently this configuration turns off WDT and FPROTECT,
which is TODO to fix.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Signed-off-by: Mateusz Michalek <mateusz.michalek@nordicsemi.no>
Adds a new field which is set to the estimated size of the
upgrade slot data, this is used to know how much space should
be reserved in an update image to determine if an update will
fit or not
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Fixes an issue whereby a device might not have a write or erase
entry for the flash controller in devicetree. In the case whereby
the other slot has this information, use that instead. In the case
whereby neither slot has this information, use default values and
show a warning to the user
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Prevents enabling the option to save encrypted TLVs if encryption
support is not enabled, as it is required to make use of this
functionality.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds MCUboot's estimated overhead footer size to the application's
cache when using sysbuild, this allows that information to be
propagated to applications which can use the information to reduce
the available size for an application, preventing the MCUboot
error of image too large to swap.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Add support for ESP32xx_luatos_core targets to build
as Zephyr application.
This target is simular to esp32 devkitm,
copy conf file from esp32xx_devkitm
Signed-off-by: YuLong Yao <feilongphone@gmail.com>
The static declaration of 'led0' was moved to 'io.c' which broke
building with the 'MCUBOOT_INDICATION_LED' enabled:
mcuboot/boot/zephyr/main.c:380:22: error:
'led0' undeclared (first use in this function)
380 | gpio_pin_set_dt(&led0, 1);
| ^~~~
This adds simple function 'io_led_set()' for changing LED's value.
Fixes: 433b8480 ("zephyr: Move IO functions out of main to separate file")
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This fixes below error when building with 'MCUBOOT_INDICATION_LED' and
'LOG' enabled:
In file included from zephyr/include/zephyr/logging/log.h:11,
from zephyr/include/zephyr/usb/usb_device.h:43,
from bootloader/mcuboot/boot/zephyr/io.c:26:
mcuboot/boot/zephyr/io.c: In function 'io_led_init':
zephyr/include/zephyr/logging/log_core.h:151:20: error:
'__log_level' undeclared (first use in this function)
151 | (_level <= __log_level) && \
| ^~~~~~~~~~~
Fixes: 433b8480 ("zephyr: Move IO functions out of main to separate file")
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This fixes below warning when building with 'MCUBOOT_INDICATION_LED'
enabled:
mcuboot/boot/zephyr/main.c:410:5:
warning: implicit declaration of function 'led_init';
did you mean 'io_led_init'? [-Wimplicit-function-declaration]
410 | led_init();
| ^~~~~~~~
| io_led_init
Fixes: 433b8480 ("zephyr: Move IO functions out of main to separate file")
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Adds a new operation style in which the secondary slot has an
image which is used to update the primary image only.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Prevents an issue which occurs when the MCUboot configuration is
changed which then selects multiple conflicting symbols
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Fixes USB configurations so that they build out of the box, this
previously falsely built successfully but would not run
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds a build failure if the main thread priority is not preemptible
and USB CDC ACM serial recovery is used, this is because if this is
the case, USB events will never be able to be processed and serial
recovery cannot ever enumerate
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This prevents MCUboot from successfully building if console and
serial recovery (USB CDC) are both enabled and they both point to
the same device
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This allows for out-of-tree modules to define their own boot serial
functions by using iterable sections.
Note that this also removes the custom img list command, which was
not used in-tree.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds the ability to share mcuboot configuration with the
application using Zephyr's retention subsystem.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Marek Matej