Fixup how we fake out devicetree.h, which is now really the flash map
API for what mcuboot is using.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Updates a few sim dependencies, reducing the amount of crates
required for a build; also gets rid of cases of more than one
version required for some crates. Results in depending on 76
crates instead of 89 before the PR.
Signed-off-by: Fabio Utzig <utzig@apache.org>
Add an apache SPDX header and explicit license lines. The date ranges
of the license lines is derived from the git history. Having these
explicitly present will make contributions from other parties easier, as
they will simply be able to add their own copyright line, rather than
having to describe that it only covers modifications.
Signed-off-by: David Brown <david.brown@linaro.org>
This changes the simulator to save the encryption TLV itself instead
of the unecrypted AES-128 key when doing the ECIES encryption test,
to add proper test coverage of this configuration option.
Signed-off-by: Fabio Utzig <utzig@apache.org>
Add new bootutil function that returns the size of the status area.
The simulator was updated to remove the custom calculation and get
the size directly from bootutil, avoiding breakages the happen when
both are not in sync.
Signed-off-by: Fabio Utzig <utzig@apache.org>
In zephyr code-base some generic include patches
and defines had been deprecated since a while.
This condition was maintained until zephyr v2.1.0 inclusive.
Recently these deprecated items were removed completely from
the zephyr master branch. Zephyr current SHA of this patch is
e124c1cd34938f02bbe879533c6bd29b5ff53707
This patch switch mcuboot to using most recent items.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
* Adds a new level (BOOT_LOG_SIM) to be used only for messages that
are interesting while debugging bootutil in the simulator. This should
be used for extra verbose prints.
* Also added fflushs after fprints to guarantee that messages are printed
even when assertions are raised.
* For abstraction completeness, add "do nothing" definitions of _LOG_SIM
to the other ports.
* Make DEBUG the default level when building the simulator (one can
still lower verbosity using any other value for RUST_LOG).
Signed-off-by: Fabio Utzig <utzig@apache.org>
Move the external mbedtls submodule out of the sim/mcuboot-sys directory
into the ext directory. This will allow the same copy of mbed TLS to be
used by other board support packages, instead of having to make a
duplicate clone.
Signed-off-by: David Brown <david.brown@linaro.org>
The ext/mbedtls directory has a copy of the ASN.1 parser from the mbed
TLS library. To allow a future change to bring the entire mbed TLS
library in as a submodule under ext, rename this to mbedtls-asn1 to make
it clear this is only a subset.
Signed-off-by: David Brown <david.brown@linaro.org>
Convert this `extern const uint32_t` to a simple define. Provide an
accessor function so that the simulator is able to access the value as
well. This has a minor improvement on the generated code within MCUboot
itself.
Signed-off-by: David Brown <david.brown@linaro.org>
BOOT_MAX_ALIGN is defined as
extern const uint32_t BOOT_MAX_ALIGN;
and is assigned a value in a single file. This causes extra work when
this is used as the size of a local variable in a function.
The value was made a constant in order for the simulator to be able to
access the value. Instead of making it a "real" constant, keep it as a
define, unifying the value of FLASH_MAX_ALIGN and this one, and provide
an accessor function for the test code to be able to access this value.
This causes a minor improvement in the code generated in
`boot_write_status`, but more importantly, eliminates a VLA from the
code, which increases the possible compilers supported by MCUboot.
Signed-off-by: David Brown <david.brown@linaro.org>
This introduces an API which allows for iteration over an image's TLVs
without resorting to low-level implementation details. All previous TLV
low-level handling was updated to comply with this new interface, and it
also makes it easier for external code to handle TLVs.
The API provides two functions:
1) To start a new iterator:
```
int bootutil_tlv_iter_begin(struct image_tlv_iter *it,
const struct image_header *hdr,
const struct flash_area *fap, uint8_t type,
bool prot);
```
2) To iterate over existing TLVs of given type:
```
int bootutil_tlv_iter_next(struct image_tlv_iter *it, uint32_t *off,
uint16_t *len, uint8_t *type);
```
A type of IMAGE_TLV_ANY was added to allow for iteration over all TLVs.
Low-level TLV access functions were removed from API, but low-level
structs are still visible in the namespace.
Signed-off-by: Fabio Utzig <utzig@apache.org>
Add a `debug_dump()` method to `Images` to allow the images to be
written to a file. The dependency test will call this if the
environment variable MCUBOOT_DEBUG_DUMP is set.
In order to make these debug dumps more useful, add a simple partition
table to the beginning of the image (where MCUboot would reside on
target). This has a simple header, and then entries for each partition,
using the partition ids used within the simulator. This allows the
image to be more easily used by external tools.
As an example, `scripts/mcubin.bt` is a binary template for the [010
Editor](https://www.sweetscape.com/010editor/), allowing it to decode
and show the details of images from MCUboot.
Signed-off-by: David Brown <david.brown@linaro.org>
With the recent changes in bootutil, now there is no need to lock the
test threads to run sequentially, so the global lock was removed. The
locking now happens to access resources such as flash, flash params,
simulator context, etc on a per thread basis. Some of the global
variables that were used by the simulator itself (FFI) were made into a
context struct passed in to invoke_go.
Signed-off-by: Fabio Utzig <utzig@apache.org>
Currently to determine which image is being operated on, there is a global
variable called current_image which is used by most macros and APIs to
correctly access the flash areas required by the bootloader. This moves
this variable to the already existing state struct and refactors all
macros and APIs to receive the current image by parameters. To maintain
compatibility some of the macros were not updated and use image 0 when
called.
The definitions of FLASH_AREA_IMAGE_PRIMARY and FLASH_AREA_IMAGE_SECONDARY
for Mynewt compatibility were moved out of bootutil sources to a Mynewt
specific include file.
Signed-off-by: Fabio Utzig <utzig@apache.org>
This patch introduces the BOOT_IMAGE_NUMBER macro and current_image
variable to support multiple updatable images and the associated
extended flash layout.
The FLASH_AREA_IMAGE_* object-like macros are replaced with
function-like ones and therefore some functions have been updated,
because the labels of a switch statement and the initialization
values of objects with static storage duration have to be constant
expressions.
Change-Id: Ib7b26ec3c94233e52db4f97825ddb6a3e55bb1d3
Signed-off-by: David Vincze <david.vincze@arm.com>
Support non-continuous image flash area ID mapping. It was assumed
that the flash area IDs are subsequent and increasing numbers which
might not be true in all cases.
Change-Id: I0d1285d6fcf1e83a64611c9ad4f65abd002c25d3
Signed-off-by: David Vincze <david.vincze@arm.com>
Prior to this change, the scratch image trailer had a different format
from a slot image trailer. Specifically:
1. The scratch trailer only contained a single set of status entries
(three bytes); the slot trailer contained `BOOT_STATUS_MAX_ENTRIES`
sets of status entries.
2. The scratch trailer did not contain the `copy_done` field.
This inconsistency required some extra conditional logic in the trailer
handling code. It is simpler to just use the same trailer format
everywhere.
This commit removes this inconsistency. Now, the scratch trailer
structure is identical to that of the slot trailer.
Signed-off-by: Christopher Collins <ccollins@apache.org>
Construct the ImagesBuilder based on the number of images compiled into
the code. If the flash device doesn't have enough areas for the test,
the test will be skipped.
Extend the FlashId to include Image2, and Image3. Remove the unused
ones, so that these can be placed immediately after the scratcharea.
The current simulator code assumes the flash areas are numbered
contiguously, requiring these extraneous partitions to be eliminated.
Signed-off-by: David Brown <david.brown@linaro.org>
The name `SimFlashMap` is a bit misleading, as the Map part is more of
an implementation detail when the type really just represents multiple
flash devices.
This is just a rename, but the names `SimFlashMap` and the value
`flashmap` occur in a lot of places in the image module.
Signed-off-by: David Brown <david.brown@linaro.org>
enc_state table was indexed with assumption that
image flash area are subsequent and increasing numbers.
It might not be true while building zephyr.
Patch introduce flash_area_id_to_image_slot() implementation for
the zephyr port and uses it to assign proper slot number.
This API is already available in MyNewt.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This change replaces the slot 0/1 terminology with primary/secondary
slot and replaces FLASH_AREA_IMAGE_0/1 with
FLASH_AREA_IMAGE_PRIMARY/SECONDARY. This naming convention may be more
understandable, fits better to MCUs with multiple images and it is an
architecture agnostic alternative as well.
Change-Id: I655a585f6ae023852c671ee6635399efe25209c9
Signed-off-by: David Vincze <david.vincze@arm.com>
Signed-off-by: David Brown <david.brown@linaro.org>
Zephyr flash_map reworks caused that areas id exact number are
assigned dynamically.
This patch i counterpart to
https://github.com/zephyrproject-rtos/zephyr/pull/8837
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This removes the unsafe Tinycrypt bindings previously used for signing
with ECDSA, and relies on ring native support.
The ring library was updated to 0.14.1.
Signed-off-by: Fabio Utzig <utzig@apache.org>
The old log subsystem has been deprecated in Zephyr.
Migrate to the new subsystem to avoid compilation warnings.
In-place log processing is selected as it is required as MCUBoot is
one thread application.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Apply the changes suggested by
cargo fix --edition-idioms
and cleanup the results a bit. Eliminate `macro_use` extern crates.
Signed-off-by: David Brown <david.brown@linaro.org>
A few packages have updates that make them more convient to use with
Rust 2018's 'use macro'. This is convenient as it allows control over
what macros are imported, but without these updates, these packages
require you to know the names of internal macros to import.
Signed-off-by: David Brown <david.brown@linaro.org>
This adds the functionality to build/run testing on images that were
signed using ECDSA and encrypted with KW, using tinycrypt.
Also when it this mode, ecdsa+kw, adds the Mbed-TLS submodule to the
build because the simulator needs to use the Mbed-TLS keywrapping
infrastructure to generate the keys sent to the image.
Signed-off-by: Fabio Utzig <utzig@apache.org>
This adds an initial device with multiple flash (nrf52840 + SPI flash)
and updates all test routines to use a HashMap of flash devices (added
as type SimFlashMap).
Signed-off-by: Fabio Utzig <utzig@apache.org>
A new type `FlashMap` that stores a HashMap of [device_id -> Flash trait]
was added, which enables multi-flash devices to be passed around.
The previously existing static FLASH value that was used to simulate the
raw device, was updated to using a FlashMap which enables bootutil to
interface with more than one flash device.
Signed-off-by: Fabio Utzig <utzig@apache.org>
AreaDesc was modified to not receive a flash device on its constructor,
and instead a new function `add_flash_sectors` was added that allows it
to receive a flash device and id.
The `add_image` function that populates the areas also now receives a
dev_id that is used internally as fa_device_id.
Signed-off-by: Fabio Utzig <utzig@apache.org>
The previous c/rust ffi functions were hardcoding the values of align
and erased_val before each run through static globals. This adds new sim
flash functions that get the align/erased_val from the sim flash device
that is being run on, allowing that later multiple flash devices can
each use its own params.
Signed-off-by: Fabio Utzig <utzig@apache.org>
A new align() function was added to SimFlash, and most functions that
were using/receiving align or erased_val parameters that had access to a
Flash trait were cleaned up so that they get the parameters directly
from the Flash device.
This will make it easier to extend for multiple Flash devices since
parameters should depend on the device in use.
Signed-off-by: Fabio Utzig <utzig@apache.org>
Update `flash_area_*()` functions to call `sim_flash_*()` directly
instead of using `hal_flash_*()` functions that were not part of the
main bootloader anymore.
Signed-off-by: Fabio Utzig <utzig@apache.org>
This adds new cargo features to allow running tests of encrypted
images with both RSA-OAEP and AES-128-KW.
When installing images on the simulated flash, both a plain and an
encrypted images are created. When encrypted image support is enabled,
verification of images in slot1 match against the encrypted image,
otherwise plain images are used.
PS: Also fixes ImageHeader to match bootutil definition.
Signed-off-by: Fabio Utzig <utzig@apache.org>
This extends the simulator to be able to test the bootloader in devices
which use flash technologies that erase flash at 0 instead of 0xff.
Two MCU devices that have this "property" are the STM32L0x and STM32L1x
lines from ST.
Signed-off-by: Fabio Utzig <utzig@apache.org>
This also updates the RSA test to add extra build files for zeroize, and
updates to new calloc/free configuration style.
Signed-off-by: Fabio Utzig <utzig@apache.org>
The hardcoded keys for Zephyr were removed and external references were
added for the built time autogenerated variables. A hardcoded key file
was added specifically for the simulator.
Signed-off-by: Fabio Utzig <utzig@apache.org>
New logging macros were added for all supported platforms, following the
documentation defined in the template config file.
Signed-off-by: Fabio Utzig <utzig@apache.org>
These (currently) trivial files do not add license headers. Go ahead
and add the boilerplate Apache header.
In addition, I've also added an SPDX header. Although this is a first
for the MCUboot project, this will provide a template for adding these
headers to other files.
Fixes#282
Signed-off-by: David Brown <david.brown@linaro.org>
CC: Marti Bolivar <marti@opensourcefoundries.com>
CC: Fabio Utzig <utzig@apache.org>
The patch introduce usage of zephyr flas_map module instead
of mcuboot zephyr-only implementation. Unused flash_area_to_sectors
API of former flash_map was removed as well.
Size of sector-status-update-map entry is now defined thanks to the
minimum write size supported by the flash driver.
For avoid ambiguity former zephyr-only files flash_map.c
were renamed to flash_map_extended.c (its code now implements
only addition to this what zephyr flash_map implements).
flash_map.h header include is now warped by flash_map_backedn.h headre
because implementations and include pathes are diferent in Zephyr and Mynewt.
Usage of hal_flash_align() were replaced by usage flash_area_align().
This provide consistency between MyNewt and Zephyr implementation as
this API is available in both RTOSes.
flash_map.h was moved to the simulator c-support files as now missing in
the boot/zephyr subdirectories.
f. boot_scratch_fa_device_id was removed as unused.
f. boot_img_fa_device_id was and expanded the only use of it
(on loader.c).
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Continue removing platform-specific conditional compilation from
bootutil by adding a new MCUBOOT_HAVE_ASSERT_H configuration option
and associated header file. Right now, that's only used by the
simulator.
That leaves just bootutil_log.h with platform-specific contents, but
since it's meant to be an abstraction layer for logging, we'll let it
stand for now.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Take the opportunity to clean up a bit of platform cruft that has
gotten into bootutil by moving it to mcuboot_config.h, and ensuring it
is documented in the template config file.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Handle the CONFIG_BOOT_SIGNATURE_TYPE_xxx values in Zephyr's
mcuboot_config.h by converting them into the platform-agnostic MCUboot
definitions.
This requires some changes to the way the release test Makefile is
structured, since Kconfig symbols cannot be set from the command line.
Instead, use the OVERLAY_CONFIG feature of the Zephyr build system,
which allows specifying extra fragments to merge into the final
.config. (This is an orthogonal mechanism to setting CONF_FILE; it is
used by Zephyr's CI script sanitycheck to add additional fragments, so
it's appropriate for use by MCUboot's testing scripts as well.)
We additionally need to move to a single prj.conf file due to a
dependency issue. We can no longer determine CONF_FILE from the
signature type, since that is now determined from the final .config or
autoconf.h, which is a build output that depends on CONF_FILE.
To move to a single prj.conf:
- delete prj-p256.conf and adjust prj.conf to serve both signature types
- add a top-level mbedTLS configuration file which dispatches to
the right sub-header depending on the key type
- as a side effect, have the simulator pick the right config file
depending on the case
This fixes and cleans up quite a bit of the signature type handling,
which had become something of a mess over time. For example, it fixes
a bug in ECDSA mode's configuration that wasn't actually selecting
config-asn1.h, and forces the simulator to use the same mbedTLS
configuration file as builds for real hardware.
Finally, we also have to move the mbedTLS vs. TinyCrypt choice into
mcuboot_config.h at the same time as well, since CMakeLists.txt was
making that decision based on the signature type.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
2.7.0 fixes a security issue but breaks MCU boot. Bump to this version
so that the simulator will verify that this version works properly.
Signed-off-by: David Brown <david.brown@linaro.org>
Move to newer versions of some upstream packages, lazy_static, which is
now at 1.0 (no api change), and error-chain (0.11), which eliminates a
warning during compilation.
Signed-off-by: David Brown <david.brown@linaro.org>
Assertions that are expected to fail under sim test, are now marked as such
using the macro ASSERT which allows to programmatically switch between normal
assert() behavior and captured assertion.
Assertion changes were moved to more appropriate owners and code duplication
was removed.
Signed-off-by: Fabio Utzig <utzig@apache.org>
When building in simulator mode, mock assert() to call an simulator
function which will enable other code to check if some path failed.
The assert checking interface, was added to boot_go which now
returns the low-level invocation results as well as the number of
asserts triggered.
Some new added tests check for assert() and expect it to happen. To not
abort tests, assert() was changed under sim env to not call c assert()
and instead just do some internal calculation which could be checked
by the simulator after a bootloader run and assert() catching behavior
was made optional (each test choses the behavior it needs).
Signed-off-by: Fabio Utzig <utzig@apache.org>
This bundles the asn1 parser from mbed-tls into mcuboot, which allows
adding EC crypto (tinycrypt based) functionality for target OSes that
don't bundle mbed-tls.
Signed-off-by: Fabio Utzig <utzig@apache.org>
Our current travis environment still uses gcc 4.8.4 which defaults to
std=gnu90. Some of tinycrypt's code requires c99.
Signed-off-by: Fabio Utzig <utzig@apache.org>
Since ring does not yet support ecdsa signing, a thin layer was added
to allow the simulator to call tinycrypt's signing routine.
Signed-off-by: Fabio Utzig <utzig@apache.org>
This enables building ecdsa feature using tinycrypt (mbed still built
for ASN1). The default mbed-tls config was update to use the MCUBOOT_SIGN_*
symbols.
Signed-off-by: Fabio Utzig <utzig@apache.org>
Fixes warnings treated as errors when upgrading gcc crate to 0.3.54.
Warnings are due to non-used variables and comparison between signed
and unsigned.
Signed-off-by: Fabio Utzig <utzig@apache.org>
Lock the simulation with a mutex to prevent concurrent access. The C
code being tested uses globals, and can only be run in one context at a
time. The Rust test framework may run tests concurrently, so use the
mutex to prevent this.
Signed-off-by: David Brown <david.brown@linaro.org>
Move the alignment into the `boot_go` wrapper. Instead of relying on
this as a global, pass it around, ultimately setting it in the C
wrapper. This is in preparation to protecting the `boot_go` call with a
mutex to prevent reentrancy.
Signed-off-by: David Brown <david.brown@linaro.org>
Instead of setting/reading a global, pass a reference through the Rust
wrapper to `boot_go`. This is one change needed so that `boot_go` can
be reentrant.
Signed-off-by: David Brown <david.brown@linaro.org>
This add a new option to overwrite-only mode that enables copy/erase of
only the amount of sectors that are required to store the source image.
This is enabled by default when overwrite-only mode is used.
MCUB-70
Signed-off-by: Fabio Utzig <utzig@apache.org>
It isn't necessary for the 'area' module to be exposed. Re-export the
two definitions from the crate at the top level, and make the module
private.
Signed-off-by: David Brown <david.brown@linaro.org>
The mbedtls library is used by the binding crate, so move the submodule
into this directory as well.
Signed-off-by: David Brown <david.brown@linaro.org>
Create a crate `mcuboot-sys` to hold the building and binding of the
mcuboot code. There aren't any substantive code changes here, just
moving the code into a separate crate.
Signed-off-by: David Brown <david.brown@linaro.org>
Kumar Gala