OrgZephyr/mcuboot
OrgZephyr
/
mcuboot
mirror of https://github.com/zephyrproject-rtos/mcuboot.git
1
0
Fork 0
Code Issues Releases Wiki Activity

boot: zephyr: remove thingy53_nrf5340_cpuapp.conf board configuration 

Removed the board configuration for Thingy:53 Application Core as it
contains references to the Kconfig modules that are not available in
the upstream Zephyr. The current configuration is set up to work
in the nRF Connect SDK environment and should be moved there.

Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
This commit is contained in:
Kamil Piszczek 2022-11-14 14:58:53 +01:00 committed by Andrzej Puzdrowski
parent 36bac4f6a5
commit a1de4e55ef
1 changed files with 0 additions and 72 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

72
boot/zephyr/boards/thingy53_nrf5340_cpuapp.conf
View File

@ -1,72 +0,0 @@
CONFIG_SIZE_OPTIMIZATIONS=y
CONFIG_SYSTEM_CLOCK_NO_WAIT=y
CONFIG_PM=n
CONFIG_MAIN_STACK_SIZE=10240
CONFIG_MBEDTLS_CFG_FILE="mcuboot-mbedtls-cfg.h"
CONFIG_BOOT_MAX_IMG_SECTORS=2048
CONFIG_BOOT_SIGNATURE_TYPE_RSA=y
# Flash
CONFIG_FLASH=y
CONFIG_BOOT_ERASE_PROGRESSIVELY=y
CONFIG_SOC_FLASH_NRF_EMULATE_ONE_BYTE_WRITE_ACCESS=y
CONFIG_FPROTECT=y
# Serial
CONFIG_SERIAL=y
CONFIG_UART_LINE_CTRL=y
# MCUBoot serial
CONFIG_GPIO=y
CONFIG_MCUBOOT_SERIAL=y
CONFIG_MCUBOOT_SERIAL_DIRECT_IMAGE_UPLOAD=y
CONFIG_BOOT_SERIAL_CDC_ACM=y
# Required by QSPI
CONFIG_NORDIC_QSPI_NOR=y
CONFIG_NORDIC_QSPI_NOR_FLASH_LAYOUT_PAGE_SIZE=4096
CONFIG_NORDIC_QSPI_NOR_STACK_WRITE_BUFFER_SIZE=16
# Required by USB and QSPI
CONFIG_MULTITHREADING=y
# USB
CONFIG_USB_DEVICE_REMOTE_WAKEUP=n
CONFIG_USB_DEVICE_MANUFACTURER="Nordic Semiconductor ASA"
CONFIG_USB_DEVICE_PRODUCT="Bootloader Thingy:53"
CONFIG_USB_DEVICE_VID=0x1915
CONFIG_USB_DEVICE_PID=0x5300
CONFIG_USB_CDC_ACM=y
# Decrease memory footprint
CONFIG_CBPRINTF_NANO=y
CONFIG_TIMESLICING=n
CONFIG_BOOT_BANNER=n
CONFIG_CONSOLE=n
CONFIG_CONSOLE_HANDLER=n
CONFIG_UART_CONSOLE=n
CONFIG_USE_SEGGER_RTT=n
CONFIG_LOG=n
CONFIG_ERRNO=n
CONFIG_PRINTK=n
CONFIG_RESET_ON_FATAL_ERROR=n
CONFIG_SPI=n
CONFIG_I2C=n
CONFIG_UART_NRFX=n
# The following configurations are required to support simultaneous multi image update
CONFIG_PCD_APP=y
CONFIG_UPDATEABLE_IMAGE_NUMBER=2
CONFIG_BOOT_UPGRADE_ONLY=y
# The network core cannot access external flash directly. The flash simulator must be used to
# provide a memory region that is used to forward the new firmware to the network core.
CONFIG_FLASH_SIMULATOR=y
CONFIG_FLASH_SIMULATOR_DOUBLE_WRITES=y
CONFIG_FLASH_SIMULATOR_STATS=n
# Enable custom command to erase settings partition.
CONFIG_ENABLE_MGMT_PERUSER=y
CONFIG_BOOT_MGMT_CUSTOM_STORAGE_ERASE=y