OrgZephyr/mcuboot
OrgZephyr
/
mcuboot
mirror of https://github.com/zephyrproject-rtos/mcuboot.git
1
0
Fork 0
Code Issues Releases Wiki Activity
mcuboot/Kconfig

56 lines
1.2 KiB
Plaintext
Raw Normal View History

Add Kconfig for the zephyr's build of mcuboot This path introduces settings related to zephyr mcuboot serial recovery mode. It force selection on modules which are necessary to compile this project. Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
2017-09-22 17:33:41 +08:00
# Copyright (c) 2017 Linaro Limited
#
# SPDX-License-Identifier: Apache-2.0
#
mainmenu "MCUBOOT configuration"
config ZEPHYR_BASE
string
option env="ZEPHYR_BASE"
source "$ZEPHYR_BASE/Kconfig.zephyr"
menuconfig MCUBOOT_SERIAL
bool
prompt "MCUBOOT serial recovery"
default n
select REBOOT
Add serial adapter module for support serial communication for zephyr Serial adapter uses the zephyr UART driver in interrupt mode for providing communication capabilities needed for the boot serial recovery mode. This module provide API similar to mynewt console module. Serial adapter module can not be compiled along with the zephyr uart console module so this case is checked. Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
2017-10-19 17:21:52 +08:00
select UART_INTERRUPT_DRIVEN
select SERIAL
enable serial recovery functionality on the zephyr mcuboot This patch introduced serial bootloader functionality ported from mynewt targets tree. For achieving this following changes were applied: - Modified boot_serial module for using, zephyr-os modules (crc driver, mbedtls-base64 library) and the zephyr serial adapter module introduced recently. - Added service of boot serial recovery mode to main. - Adapted the input parser to using static buffers. Default serial-boot-pin configuration was added for nrf52_pca10040 and nrf52840_pca10056 boards. Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
2017-09-08 22:49:14 +08:00
select NEWLIB_LIBC
Add Kconfig for the zephyr's build of mcuboot This path introduces settings related to zephyr mcuboot serial recovery mode. It force selection on modules which are necessary to compile this project. Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
2017-09-22 17:33:41 +08:00
help
Enable serial recovery feature in mcuboot.
Add serial adapter module for support serial communication for zephyr Serial adapter uses the zephyr UART driver in interrupt mode for providing communication capabilities needed for the boot serial recovery mode. This module provide API similar to mynewt console module. Serial adapter module can not be compiled along with the zephyr uart console module so this case is checked. Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
2017-10-19 17:21:52 +08:00
config BOOT_MAX_LINE_INPUT_LEN
int "cmd line max length"
default 512
depends on MCUBOOT_SERIAL
help
Maximum length of commands transported over the serial protocol
Add Kconfig for the zephyr's build of mcuboot This path introduces settings related to zephyr mcuboot serial recovery mode. It force selection on modules which are necessary to compile this project. Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
2017-09-22 17:33:41 +08:00
config BOOT_SERIAL_DETECT_PORT
string
prompt "GPIO Port to trigger serial recovery mode"
enable serial recovery functionality on the zephyr mcuboot This patch introduced serial bootloader functionality ported from mynewt targets tree. For achieving this following changes were applied: - Modified boot_serial module for using, zephyr-os modules (crc driver, mbedtls-base64 library) and the zephyr serial adapter module introduced recently. - Added service of boot serial recovery mode to main. - Adapted the input parser to using static buffers. Default serial-boot-pin configuration was added for nrf52_pca10040 and nrf52840_pca10056 boards. Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
2017-09-08 22:49:14 +08:00
default GPIO_0 if SOC_FAMILY_NRF5
Add Kconfig for the zephyr's build of mcuboot This path introduces settings related to zephyr mcuboot serial recovery mode. It force selection on modules which are necessary to compile this project. Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
2017-09-22 17:33:41 +08:00
depends on MCUBOOT_SERIAL
help
Serial recovery detect port
config BOOT_SERIAL_DETECT_PIN
int
prompt "Pin to trigger serial recovery mode"
enable serial recovery functionality on the zephyr mcuboot This patch introduced serial bootloader functionality ported from mynewt targets tree. For achieving this following changes were applied: - Modified boot_serial module for using, zephyr-os modules (crc driver, mbedtls-base64 library) and the zephyr serial adapter module introduced recently. - Added service of boot serial recovery mode to main. - Adapted the input parser to using static buffers. Default serial-boot-pin configuration was added for nrf52_pca10040 and nrf52840_pca10056 boards. Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
2017-09-08 22:49:14 +08:00
default 11 if BOARD_NRF52840_PCA10056
default 13 if BOARD_NRF52_PCA10040
Add Kconfig for the zephyr's build of mcuboot This path introduces settings related to zephyr mcuboot serial recovery mode. It force selection on modules which are necessary to compile this project. Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
2017-09-22 17:33:41 +08:00
depends on MCUBOOT_SERIAL
help
Serial recovery detect pin
config BOOT_SERIAL_DETECT_PIN_VAL
int "Boot Pin trigger value"
default 0
range 0 1
depends on MCUBOOT_SERIAL
help
The input pin logic value which triggers the boot serial recovery mode.