99 lines
4.3 KiB
Plaintext
99 lines
4.3 KiB
Plaintext
/**
|
||
@page FreeRTOS_ThreadCreation FreeRTOS Thread Creation example
|
||
|
||
@verbatim
|
||
******************** (C) COPYRIGHT 2016 STMicroelectronics *******************
|
||
* @file FreeRTOS/FreeRTOS_ThreadCreation/readme.txt
|
||
* @author MCD Application Team
|
||
* @brief Description of the FreeRTOS Thread Creation example.
|
||
******************************************************************************
|
||
*
|
||
* @attention
|
||
*
|
||
* Copyright (c) 2017 STMicroelectronics.
|
||
* All rights reserved.
|
||
*
|
||
* This software is licensed under terms that can be found in the LICENSE file
|
||
* in the root directory of this software component.
|
||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||
*
|
||
******************************************************************************
|
||
@endverbatim
|
||
|
||
@par Description
|
||
|
||
How to implement thread creation using CMSIS RTOS API.
|
||
|
||
This example creates two threads with the same priority, which execute in
|
||
a periodic cycle of 18 seconds.
|
||
|
||
In the first 6 seconds, the thread 1 toggles LED1 each 200 ms and the
|
||
thread 2 toggles LED2 each 500 ms
|
||
In the second 6 seconds, the thread 1 suspends itself and the thread 2
|
||
continues toggling LED2
|
||
In the last 6 seconds, the thread 2 resumes execution of thread 1 then
|
||
suspends itself, the thread 1 toggles the LED1 each 400 ms
|
||
|
||
|
||
@note Care must be taken when using HAL_Delay(), this function provides accurate delay (in milliseconds)
|
||
based on variable incremented in HAL time base ISR. This implies that if HAL_Delay() is called from
|
||
a peripheral ISR process, then the HAL time base interrupt must have higher priority (numerically lower)
|
||
than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
|
||
To change the HAL time base interrupt priority you have to use HAL_NVIC_SetPriority() function.
|
||
|
||
@note The application need to ensure that the HAL time base is always set to 1 millisecond
|
||
to have correct HAL operation.
|
||
|
||
@note The FreeRTOS heap size configTOTAL_HEAP_SIZE defined in FreeRTOSConfig.h is set according to
|
||
the OS resources memory requirements of the application with +10% margin and rounded to the
|
||
upper Kbyte boundary.
|
||
|
||
For more details about FreeRTOS implementation on STM32Cube, please refer to UM1722 "Developing Applications
|
||
on STM32Cube with RTOS".
|
||
|
||
|
||
@par Keywords
|
||
|
||
RTOS, FreeRTOS, Threading
|
||
|
||
@Note<74>If the user code size exceeds the DTCM-RAM size or starts from internal cacheable memories (SRAM1 and SRAM2),that is shared between several processors,
|
||
<20><><EFBFBD><EFBFBD><EFBFBD>then it is highly recommended to enable the CPU cache and maintain its coherence at application level.
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>The address and the size of cacheable buffers (shared between CPU and other masters) must be properly updated to be aligned to cache line size (32 bytes).
|
||
|
||
@Note It is recommended to enable the cache and maintain its coherence, but depending on the use case
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> It is also possible to configure the MPU as "Write through", to guarantee the write access coherence.
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>In that case, the MPU must be configured as Cacheable/Bufferable/Not Shareable.
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Even though the user must manage the cache coherence for read accesses.
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Please refer to the AN4838 <20>Managing memory protection unit (MPU) in STM32 MCUs<55>
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Please refer to the AN4839 <20>Level 1 cache on STM32F7 Series<65>
|
||
|
||
@par Directory contents
|
||
|
||
- FreeRTOS/FreeRTOS_ThreadCreation/Inc/main.h Main program header file
|
||
- FreeRTOS/FreeRTOS_ThreadCreation/Inc/stm32f7xx_hal_conf.h HAL Library Configuration file
|
||
- FreeRTOS/FreeRTOS_ThreadCreation/Inc/stm32f7xx_it.h Interrupt handlers header file
|
||
- FreeRTOS/FreeRTOS_ThreadCreation/Inc/FreeRTOSConfig.h FreeRTOS Configuration file
|
||
- FreeRTOS/FreeRTOS_ThreadCreation/Src/main.c Main program
|
||
- FreeRTOS/FreeRTOS_ThreadCreation/Src/stm32f7xx_it.c Interrupt handlers
|
||
|
||
|
||
@par Hardware and Software environment
|
||
|
||
- This application runs on STM32F756xx/STM32F746xx devices.
|
||
|
||
- This example has been tested with STM327x6G_EVAL evaluation board and can be
|
||
easily tailored to any other supported device and development board.
|
||
|
||
- STM327x6G_EVAL Set-up
|
||
- Ensure that JP24 is in position 2-3 to use LED1.
|
||
|
||
@par How to use it ?
|
||
|
||
In order to make the program work, you must do the following :
|
||
- Open your preferred toolchain
|
||
- Rebuild all files and load your image into target memory
|
||
- Run the example
|
||
|
||
|
||
*/
|