137 lines
7.3 KiB
Plaintext
137 lines
7.3 KiB
Plaintext
/**
|
||
@page MSC_Standalone USB Host Mass Storage (MSC) application
|
||
|
||
@verbatim
|
||
******************************************************************************
|
||
* @file USB_Host/MSC_Standalone/readme.txt
|
||
* @author MCD Application Team
|
||
* @brief Description of the USB Host MSC application.
|
||
******************************************************************************
|
||
* @attention
|
||
*
|
||
* Copyright (c) 2016 STMicroelectronics.
|
||
* All rights reserved.
|
||
*
|
||
* This software is licensed under terms that can be found in the LICENSE file
|
||
* in the root directory of this software component.
|
||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||
*
|
||
******************************************************************************
|
||
@endverbatim
|
||
|
||
@par Application Description
|
||
|
||
Use of the USB host application based on the Mass Storage Class (MSC).
|
||
|
||
This is a typical application on how to use the STM32F722ZE USB OTG Host peripheral to operate with an USB
|
||
flash disk using the Bulk Only Transfer (BOT) and Small Computer System Interface (SCSI) transparent
|
||
commands combined with a file system FatFs (Middleware component).
|
||
|
||
At the beginning of the main program the HAL_Init() function is called to reset all the peripherals,
|
||
initialize the Flash interface and the systick. The user is provided with the SystemClock_Config()
|
||
function to configure the system clock (SYSCLK) to run at 216 MHz. The Full Speed (FS) USB module uses
|
||
internally a 48-MHz clock which is coming from the main PLL.
|
||
|
||
When the application is started, the connected USB flash disk device is detected in MSC mode and gets
|
||
initialized. The STM32 MCU behaves as a MSC Host, it enumerates the device and extracts VID, PID,
|
||
manufacturer name, Serial no and product name information and displays it on the LCD screen.
|
||
This application is based on read/write file and explore the USB flash disk content through a MSC routine.
|
||
LCD and joystick are provided by Adafruit 1.8" TFT shield to be plugged on Arduino connectors.
|
||
|
||
A menu is displayed and the user can select any operation from the menu using the Joystick buttons:
|
||
- "File Operations" operation writes a small text file (less to 1 KB) on the USB flash disk.
|
||
- "Explorer Disk" operation explores the USB flash disk content and displays it on the LCD screen.
|
||
User has to press the User button to display the whole USB flash disk content (recursion level 2).
|
||
- "Re-Enumerate" operation performs a new Enumeration of the device.
|
||
|
||
@note Care must be taken when using HAL_Delay(), this function provides accurate delay (in milliseconds)
|
||
based on variable incremented in SysTick ISR. This implies that if HAL_Delay() is called from
|
||
a peripheral ISR process, then the SysTick interrupt must have higher priority (numerically lower)
|
||
than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
|
||
To change the SysTick interrupt priority you have to use HAL_NVIC_SetPriority() function.
|
||
|
||
@note The application needs to ensure that the SysTick time base is always set to 1 millisecond
|
||
to have correct HAL operation.
|
||
|
||
For more details about the STM32Cube USB Host library, please refer to UM1720
|
||
"STM32Cube USB Host library".
|
||
|
||
For more details about the adafruit 1.8" TFT shield, please visit:
|
||
http://www.adafruit.com/blog/2012/04/26/new-product-adafruit-1-8-18-bit-color-tft-shield-wmicrosd-and-joystick/
|
||
|
||
@par USB Library Configuration
|
||
|
||
It is possible to fine tune needed USB Host features by modifying defines values in USBH configuration
|
||
file <20>usbh_conf.h<> available under the project includes directory, in a way to fit the application
|
||
requirements, such as:
|
||
- Level of debug: USBH_DEBUG_LEVEL
|
||
0: No debug messages
|
||
1: Only User messages are shown
|
||
2: User and Error messages are shown
|
||
3: All messages and internal debug messages are shown
|
||
By default debug messages are displayed on the debugger IO terminal; to redirect the Library
|
||
messages on the LCD screen, lcd_log.c driver need to be added to the application sources.
|
||
|
||
|
||
@par Keywords
|
||
|
||
Connectivity, USB_Host, USB, MSC, Mass Storage, Full Speed, High Speed, BOT, SCSI, Removable drive, FatFs,
|
||
File system, Write, Read, Format
|
||
|
||
@Note<74>If the user code size exceeds the DTCM-RAM size or starts from internal cacheable memories (SRAM1 and SRAM2),that is shared between several processors,
|
||
<20><><EFBFBD><EFBFBD><EFBFBD>then it is highly recommended to enable the CPU cache and maintain its coherence at application level.
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>The address and the size of cacheable buffers (shared between CPU and other masters) must be properly updated to be aligned to cache line size (32 bytes).
|
||
|
||
@Note It is recommended to enable the cache and maintain its coherence, but depending on the use case
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> It is also possible to configure the MPU as "Write through", to guarantee the write access coherence.
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>In that case, the MPU must be configured as Cacheable/Bufferable/Not Shareable.
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Even though the user must manage the cache coherence for read accesses.
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Please refer to the AN4838 <20>Managing memory protection unit (MPU) in STM32 MCUs<55>
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Please refer to the AN4839 <20>Level 1 cache on STM32F7 Series<65>
|
||
|
||
@par Directory contents
|
||
|
||
- USB_Host/MSC_Standalone/Src/main.c Main program
|
||
- USB_Host/MSC_Standalone/Src/usbh_diskio_dma.c FatFS usbh diskio driver implementation
|
||
- USB_Host/MSC_Standalone/Src/system_stm32f7xx.c STM32F7xx system clock configuration file
|
||
- USB_Host/MSC_Standalone/Src/stm32f7xx_it.c Interrupt handlers
|
||
- USB_Host/MSC_Standalone/Src/menu.c MSC State Machine
|
||
- USB_Host/MSC_Standalone/Src/usbh_conf.c General low level driver configuration
|
||
- USB_Host/MSC_Standalone/Src/explorer.c Explore the USB flash disk content
|
||
- USB_Host/MSC_Standalone/Src/file_operations.c Write/read file on the disk
|
||
- USB_Host/MSC_Standalone/Src/usbh_diskio.c USB diskio interface for FatFs
|
||
- USB_Host/MSC_Standalone/Inc/main.h Main program header file
|
||
- USB_Host/MSC_Standalone/Inc/usbh_diskio_dma.h FatFS usbh diskio driver header file
|
||
- USB_Host/MSC_Standalone/Inc/stm32f7xx_it.h Interrupt handlers header file
|
||
- USB_Host/MSC_Standalone/Inc/lcd_log_conf.h LCD log configuration file
|
||
- USB_Host/MSC_Standalone/Inc/stm32f7xx_hal_conf.h HAL configuration file
|
||
- USB_Host/MSC_Standalone/Inc/usbh_conf.h USB Host driver Configuration file
|
||
- USB_Host/MSC_Standalone/Inc/ffconf.h FAT file system module configuration file
|
||
|
||
|
||
@par Hardware and Software environment
|
||
|
||
- This application runs on STM32F722ZE devices.
|
||
|
||
- This application has been tested with STMicroelectronics NUCLEO-F722ZE board
|
||
and can be easily tailored to any other supported device and development board.
|
||
|
||
- NUCLEO-F722ZE Set-up
|
||
- Plug a USB key into the NUCLEO-F722ZE board
|
||
through 'USB micro A-Male to A-Female' cable (CN13)
|
||
|
||
- Make sure that the jumper JP4 is closed
|
||
|
||
- Adafruit 1.8" TFT shield must be connected on CN7, CN8, CN9 and CN10 Arduino connectors,
|
||
for more details please refer to UM1726.
|
||
|
||
@par How to use it ?
|
||
|
||
In order to make the program work, you must do the following :
|
||
- Open your preferred toolchain
|
||
- Rebuild all files and load your image into target memory
|
||
- Run the application
|
||
|
||
|
||
*/
|