OrgST-Microelectronics
/
STM32CubeF7
mirror of https://github.com/STMicroelectronics/STM32CubeF7.git
1
0
Fork 0
Code Issues Releases Wiki Activity
STM32CubeF7/Drivers/BSP/STM32F769I_EVAL/stm32f769i_eval.h

419 lines
14 KiB
C
Raw Blame History

/**
******************************************************************************
* @file stm32f769i_eval.h
* @author MCD Application Team
* @brief This file contains definitions for STM32F769I_EVAL LEDs,
* push-buttons and COM ports hardware resources.
******************************************************************************
* @attention
*
* Copyright (c) 2017 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F769I_EVAL_H
#define __STM32F769I_EVAL_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f7xx_hal.h"
/** @addtogroup BSP
* @{
*/
/** @addtogroup STM32F769I_EVAL
* @{
*/
/** @addtogroup STM32F769I_EVAL_LOW_LEVEL
* @{
*/
/** @defgroup STM32F769I_EVAL_LOW_LEVEL_Exported_Types LOW LEVEL Exported Types
* @{
*/
typedef enum
{
LED1 = 0,
LED_GREEN = LED1,
LED2 = 1,
LED_ORANGE = LED2,
LED3 = 2,
LED_RED = LED3,
LED4 = 3,
LED_BLUE = LED4
}Led_TypeDef;
typedef enum
{
BUTTON_WAKEUP = 0,
BUTTON_TAMPER = 1,
BUTTON_KEY = 2
}Button_TypeDef;
typedef enum
{
BUTTON_MODE_GPIO = 0,
BUTTON_MODE_EXTI = 1
}ButtonMode_TypeDef;
#if defined(USE_IOEXPANDER)
typedef enum
{
JOY_MODE_GPIO = 0,
JOY_MODE_EXTI = 1
}JOYMode_TypeDef;
typedef enum
{
JOY_NONE = 0,
JOY_SEL = 1,
JOY_DOWN = 2,
JOY_LEFT = 3,
JOY_RIGHT = 4,
JOY_UP = 5
}JOYState_TypeDef;
#endif /* USE_IOEXPANDER */
typedef enum
{
COM1 = 0,
COM2 = 1
}COM_TypeDef;
/**
* @}
*/
/** @defgroup STM32F769I_EVAL_LOW_LEVEL_Exported_Constants LOW LEVEL Exported Constants
* @{
*/
/**
* @brief Define for STM32F769I_EVAL board
*/
#if !defined (USE_STM32F769I_EVAL)
#define USE_STM32F769I_EVAL
#endif
/** @addtogroup STM32F769I_EVAL_LOW_LEVEL_LED EVAL LOW LEVEL LED
* @{
*/
#define LEDn ((uint32_t)4)
#define LED1_GPIO_PORT GPIOI
#define LED1_GPIO_CLK_ENABLE() __HAL_RCC_GPIOI_CLK_ENABLE()
#define LED1_GPIO_CLK_DISABLE() __HAL_RCC_GPIOI_CLK_DISABLE()
#define LED1_PIN GPIO_PIN_15
#define LED2_GPIO_PORT GPIOJ
#define LED2_GPIO_CLK_ENABLE() __HAL_RCC_GPIOJ_CLK_ENABLE()
#define LED2_GPIO_CLK_DISABLE() __HAL_RCC_GPIOJ_CLK_DISABLE()
#define LED2_PIN GPIO_PIN_0
#define LED3_GPIO_PORT GPIOJ
#define LED3_GPIO_CLK_ENABLE() __HAL_RCC_GPIOJ_CLK_ENABLE()
#define LED3_GPIO_CLK_DISABLE() __HAL_RCC_GPIOJ_CLK_DISABLE()
#define LED3_PIN GPIO_PIN_1
#define LED4_GPIO_PORT GPIOJ
#define LED4_GPIO_CLK_ENABLE() __HAL_RCC_GPIOJ_CLK_ENABLE()
#define LED4_GPIO_CLK_DISABLE() __HAL_RCC_GPIOJ_CLK_DISABLE()
#define LED4_PIN GPIO_PIN_3
#define LEDx_GPIO_CLK_ENABLE(__INDEX__) do{if((__INDEX__) == 0) LED1_GPIO_CLK_ENABLE(); else \
if((__INDEX__) == 1) LED2_GPIO_CLK_ENABLE(); else \
if((__INDEX__) == 2) LED3_GPIO_CLK_ENABLE(); else \
if((__INDEX__) == 3) LED4_GPIO_CLK_ENABLE(); \
}while(0)
#define LEDx_GPIO_CLK_DISABLE(__INDEX__) do{if((__INDEX__) == 0) LED1_GPIO_CLK_DISABLE(); else \
if((__INDEX__) == 1) LED2_GPIO_CLK_DISABLE(); else \
if((__INDEX__) == 2) LED3_GPIO_CLK_DISABLE(); else \
if((__INDEX__) == 3) LED4_GPIO_CLK_DISABLE(); \
}while(0)
/**
* @}
*/
/**
* @brief MFX_IRQOUt pin
*/
#define MFX_IRQOUT_PIN GPIO_PIN_8
#define MFX_IRQOUT_GPIO_PORT GPIOI
#define MFX_IRQOUT_GPIO_CLK_ENABLE() __HAL_RCC_GPIOI_CLK_ENABLE()
#define MFX_IRQOUT_GPIO_CLK_DISABLE() __HAL_RCC_GPIOI_CLK_DISABLE()
#define MFX_IRQOUT_EXTI_IRQn EXTI9_5_IRQn
/** @addtogroup STM32F769I_EVAL_LOW_LEVEL_BUTTON LOW LEVEL BUTTON
* @{
*/
/* Joystick pins are connected to IO Expander (accessible through I2C1 interface) */
#define BUTTONn ((uint8_t)3)
/**
* @brief Wakeup push-button
*/
#define WAKEUP_BUTTON_PIN GPIO_PIN_13
#define WAKEUP_BUTTON_GPIO_PORT GPIOC
#define WAKEUP_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE()
#define WAKEUP_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE()
#define WAKEUP_BUTTON_EXTI_IRQn EXTI15_10_IRQn
/**
* @brief Tamper push-button
*/
#define TAMPER_BUTTON_PIN GPIO_PIN_13
#define TAMPER_BUTTON_GPIO_PORT GPIOC
#define TAMPER_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE()
#define TAMPER_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE()
#define TAMPER_BUTTON_EXTI_IRQn EXTI15_10_IRQn
/**
* @brief Key push-button
*/
#define KEY_BUTTON_PIN GPIO_PIN_13
#define KEY_BUTTON_GPIO_PORT GPIOC
#define KEY_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE()
#define KEY_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE()
#define KEY_BUTTON_EXTI_IRQn EXTI15_10_IRQn
#define BUTTONx_GPIO_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == 0) WAKEUP_BUTTON_GPIO_CLK_ENABLE(); else\
if((__INDEX__) == 1) TAMPER_BUTTON_GPIO_CLK_ENABLE(); else\
KEY_BUTTON_GPIO_CLK_ENABLE(); } while(0)
#define BUTTONx_GPIO_CLK_DISABLE(__INDEX__) (((__INDEX__) == 0) ? WAKEUP_BUTTON_GPIO_CLK_DISABLE() :\
((__INDEX__) == 1) ? TAMPER_BUTTON_GPIO_CLK_DISABLE() : KEY_BUTTON_GPIO_CLK_DISABLE())
/**
* @}
*/
/** @addtogroup STM32F769I_EVAL_LOW_LEVEL_COM LOW LEVEL COM
* @{
*/
#define COMn ((uint8_t)1)
/**
* @brief Definition for COM port1, connected to USART1
*/
#define EVAL_COM1 USART1
#define EVAL_COM1_CLK_ENABLE() __HAL_RCC_USART1_CLK_ENABLE()
#define EVAL_COM1_CLK_DISABLE() __HAL_RCC_USART1_CLK_DISABLE()
#define EVAL_COM1_TX_PIN GPIO_PIN_9
#define EVAL_COM1_TX_GPIO_PORT GPIOA
#define EVAL_COM1_TX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
#define EVAL_COM1_TX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
#define EVAL_COM1_TX_AF GPIO_AF7_USART1
#define EVAL_COM1_RX_PIN GPIO_PIN_10
#define EVAL_COM1_RX_GPIO_PORT GPIOA
#define EVAL_COM1_RX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
#define EVAL_COM1_RX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
#define EVAL_COM1_RX_AF GPIO_AF7_USART1
#define EVAL_COM1_IRQn USART1_IRQn
#define EVAL_COMx_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == COM1) EVAL_COM1_CLK_ENABLE(); } while(0)
#define EVAL_COMx_CLK_DISABLE(__INDEX__) (((__INDEX__) == 0) ? EVAL_COM1_CLK_DISABLE() : 0)
#define EVAL_COMx_TX_GPIO_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == COM1) EVAL_COM1_TX_GPIO_CLK_ENABLE(); } while(0)
#define EVAL_COMx_TX_GPIO_CLK_DISABLE(__INDEX__) (((__INDEX__) == 0) ? EVAL_COM1_TX_GPIO_CLK_DISABLE() : 0)
#define EVAL_COMx_RX_GPIO_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == COM1) EVAL_COM1_RX_GPIO_CLK_ENABLE(); } while(0)
#define EVAL_COMx_RX_GPIO_CLK_DISABLE(__INDEX__) (((__INDEX__) == 0) ? EVAL_COM1_RX_GPIO_CLK_DISABLE() : 0)
/**
* @brief Definition for Potentiometer, connected to ADC3
*/
#define ADCx ADC3
#define ADCx_CLK_ENABLE() __HAL_RCC_ADC3_CLK_ENABLE()
#define ADCx_CHANNEL_GPIO_CLK_ENABLE() __HAL_RCC_GPIOF_CLK_ENABLE()
#define ADCx_FORCE_RESET() __HAL_RCC_ADC_FORCE_RESET()
#define ADCx_RELEASE_RESET() __HAL_RCC_ADC_RELEASE_RESET()
/* Definition for ADCx Channel Pin */
#define ADCx_CHANNEL_PIN GPIO_PIN_10
#define ADCx_CHANNEL_GPIO_PORT GPIOF
/* Definition for ADCx's Channel */
#define ADCx_CHANNEL ADC_CHANNEL_8
#define SAMPLINGTIME ADC_SAMPLETIME_3CYCLES
#define ADCx_POLL_TIMEOUT 10
/**
* @brief Joystick Pins definition
*/
#if defined(USE_IOEXPANDER)
#define JOY_SEL_PIN IO_PIN_0
#define JOY_DOWN_PIN IO_PIN_1
#define JOY_LEFT_PIN IO_PIN_2
#define JOY_RIGHT_PIN IO_PIN_3
#define JOY_UP_PIN IO_PIN_4
#define JOY_NONE_PIN JOY_ALL_PINS
#define JOY_ALL_PINS (IO_PIN_0 | IO_PIN_1 | IO_PIN_2 | IO_PIN_3 | IO_PIN_4)
#endif /* USE_IOEXPANDER */
/**
* @brief Eval Pins definition connected to MFX
*/
#if defined(USE_IOEXPANDER)
#define XSDN_PIN IO_PIN_16
#define MII_INT_PIN IO_PIN_13
#define RSTI_PIN IO_PIN_11
#define CAM_PLUG_PIN IO_PIN_12
#define TS_INT_PIN IO_PIN_14
#define AUDIO_INT_PIN IO_PIN_5
#define OTG_FS1_OVER_CURRENT_PIN IO_PIN_6
#define OTG_FS1_POWER_SWITCH_PIN IO_PIN_7
#define OTG_FS2_OVER_CURRENT_PIN IO_PIN_8
#define OTG_FS2_POWER_SWITCH_PIN IO_PIN_9
#define SD1_DETECT_PIN IO_PIN_15
#define SD2_DETECT_PIN IO_PIN_10
#define SD_DETECT_PIN SD1_DETECT_PIN
#endif /* USE_IOEXPANDER */
/* Exported constant IO ------------------------------------------------------*/
/* The MFX_I2C_ADDR input pin selects the MFX I2C device address
MFX_I2C_ADDR input pin MFX I2C device address
0 b: 1000 010x (0x84)
1 b: 1000 011x (0x86)
This input is sampled during the MFX firmware startup. */
#define IO_I2C_ADDRESS ((uint16_t)0x84) /*mfx MFX_I2C_ADDR 0*/
#define IO_I2C_ADDRESS_2 ((uint16_t)0x86) /*mfx MFX_I2C_ADDR 1*/
/**
* @brief TouchScreen FT6206 Slave I2C address 1
*/
#define TS_I2C_ADDRESS ((uint16_t)0x54)
/**
* @brief TouchScreen FT6336G Slave I2C address 2
*/
#define TS_I2C_ADDRESS_A02 ((uint16_t)0x70)
/**
* @brief LCD DSI Slave I2C address 1
*/
#define LCD_DSI_ADDRESS TS_I2C_ADDRESS
/**
* @brief LCD DSI Slave I2C address 2
*/
#define LCD_DSI_ADDRESS_A02 TS_I2C_ADDRESS_A02
#define CAMERA_I2C_ADDRESS ((uint16_t)0x5A)
#define CAMERA_I2C_ADDRESS_2 ((uint16_t)0x78)
#define AUDIO_I2C_ADDRESS ((uint16_t)0x34)
#define EEPROM_I2C_ADDRESS_A01 ((uint16_t)0xA0)
#define EEPROM_I2C_ADDRESS_A02 ((uint16_t)0xA6)
/* I2C clock speed configuration (in Hz)
WARNING:
Make sure that this define is not already declared in other files (ie.
stm32f769i_eval.h file). It can be used in parallel by other modules. */
#ifndef I2C_SPEED
#define I2C_SPEED ((uint32_t)100000)
#endif /* I2C_SPEED */
/* User can use this section to tailor I2Cx/I2Cx instance used and associated
resources */
/* Definition for I2Cx clock resources */
#define EVAL_I2Cx I2C1
#define EVAL_I2Cx_CLK_ENABLE() __HAL_RCC_I2C1_CLK_ENABLE()
#define EVAL_DMAx_CLK_ENABLE() __HAL_RCC_DMA1_CLK_ENABLE()
#define EVAL_I2Cx_SCL_SDA_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
#define EVAL_I2Cx_FORCE_RESET() __HAL_RCC_I2C1_FORCE_RESET()
#define EVAL_I2Cx_RELEASE_RESET() __HAL_RCC_I2C1_RELEASE_RESET()
/* Definition for I2Cx Pins */
#define EVAL_I2Cx_SCL_PIN GPIO_PIN_8
#define EVAL_I2Cx_SCL_SDA_GPIO_PORT GPIOB
#define EVAL_I2Cx_SCL_SDA_AF GPIO_AF4_I2C1
#define EVAL_I2Cx_SDA_PIN GPIO_PIN_9
/* I2C interrupt requests */
#define EVAL_I2Cx_EV_IRQn I2C1_EV_IRQn
#define EVAL_I2Cx_ER_IRQn I2C1_ER_IRQn
/* I2C TIMING Register define when I2C clock source is SYSCLK */
/* I2C TIMING is calculated from APB1 source clock = 50 MHz */
/* Due to the big MOFSET capacity for adapting the camera level the rising time is very large (>1us) */
/* 0x40912732 takes in account the big rising and aims a clock of 100khz */
#ifndef EVAL_I2Cx_TIMING
#define EVAL_I2Cx_TIMING ((uint32_t)0x40912732)
#endif /* EVAL_I2Cx_TIMING */
/**
* @}
*/
/**
* @}
*/
/** @defgroup STM32F769I_EVAL_LOW_LEVEL_Exported_Macros LOW LEVEL Exported Macros
* @{
*/
/**
* @}
*/
/** @defgroup STM32F769I_EVAL_LOW_LEVEL_Exported_Functions LOW LEVEL Exported Functions
* @{
*/
uint32_t BSP_GetVersion(void);
void BSP_LED_Init(Led_TypeDef Led);
void BSP_LED_DeInit(Led_TypeDef Led);
void BSP_LED_On(Led_TypeDef Led);
void BSP_LED_Off(Led_TypeDef Led);
void BSP_LED_Toggle(Led_TypeDef Led);
void BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef ButtonMode);
void BSP_PB_DeInit(Button_TypeDef Button);
uint32_t BSP_PB_GetState(Button_TypeDef Button);
void BSP_COM_Init(COM_TypeDef COM, UART_HandleTypeDef *husart);
void BSP_COM_DeInit(COM_TypeDef COM, UART_HandleTypeDef *huart);
void BSP_POTENTIOMETER_Init(void);
uint32_t BSP_POTENTIOMETER_GetLevel(void);
#if defined(USE_IOEXPANDER)
uint8_t BSP_JOY_Init(JOYMode_TypeDef JoyMode);
void BSP_JOY_DeInit(void);
JOYState_TypeDef BSP_JOY_GetState(void);
#endif /* USE_IOEXPANDER */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F769I_EVAL_H */
Reference in New Issue View Git Blame Copy Permalink