93 lines
4.3 KiB
Plaintext
93 lines
4.3 KiB
Plaintext
/**
|
||
@page RNG_MultiRNG Multiple Random Number Generator example
|
||
|
||
@verbatim
|
||
******************************************************************************
|
||
* @file RNG/RNG_MultiRNG/readme.txt
|
||
* @author MCD Application Team
|
||
* @brief Description of Multiple Random Number Generator example.
|
||
******************************************************************************
|
||
* @attention
|
||
*
|
||
* Copyright (c) 2016 STMicroelectronics.
|
||
* All rights reserved.
|
||
*
|
||
* This software is licensed under terms that can be found in the LICENSE file
|
||
* in the root directory of this software component.
|
||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||
*
|
||
******************************************************************************
|
||
@endverbatim
|
||
|
||
@par Example Description
|
||
|
||
Configuration of the RNG using the HAL API. This example uses the RNG to generate 32-bit long random numbers.
|
||
|
||
At the beginning of the main program the HAL_Init() function is called to reset
|
||
all the peripherals, initialize the Flash interface and the systick.
|
||
Then the SystemClock_Config() function is used to configure the system
|
||
clock (SYSCLK) to run at 216 MHz.
|
||
|
||
The RNG peripheral configuration is ensured by the HAL_RNG_Init() function.
|
||
This later is calling the HAL_RNG_MspInit()function which core is implementing
|
||
the configuration of the needed RNG resources according to the used hardware (CLOCK,
|
||
GPIO, DMA and NVIC). You may update this function to change RNG configuration.
|
||
|
||
After startup, user is asked to press Tamper push-button.
|
||
Multiple Random 32bit numbers are genrerated as soon as the button is pressed.
|
||
The Random numbers are updated and displayed on the debugger in aRandom32bit variable.
|
||
|
||
LED1 will turn ON, if any error is occurred.
|
||
|
||
@note Care must be taken when using HAL_Delay(), this function provides accurate delay (in milliseconds)
|
||
based on variable incremented in SysTick ISR. This implies that if HAL_Delay() is called from
|
||
a peripheral ISR process, then the SysTick interrupt must have higher priority (numerically lower)
|
||
than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
|
||
To change the SysTick interrupt priority you have to use HAL_NVIC_SetPriority() function.
|
||
|
||
@note The application need to ensure that the SysTick time base is always set to 1 millisecond
|
||
to have correct HAL operation.
|
||
|
||
@par Keywords
|
||
|
||
Analog, RNG, Random, FIPS PUB 140-2, Analog Random number generator, Entropy, Period
|
||
|
||
@Note<74>If the user code size exceeds the DTCM-RAM size or starts from internal cacheable memories (SRAM1 and SRAM2),that is shared between several processors,
|
||
<20><><EFBFBD><EFBFBD><EFBFBD>then it is highly recommended to enable the CPU cache and maintain its coherence at application level.
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>The address and the size of cacheable buffers (shared between CPU and other masters) must be properly updated to be aligned to cache line size (32 bytes).
|
||
|
||
@Note It is recommended to enable the cache and maintain its coherence, but depending on the use case
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> It is also possible to configure the MPU as "Write through", to guarantee the write access coherence.
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>In that case, the MPU must be configured as Cacheable/Bufferable/Not Shareable.
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Even though the user must manage the cache coherence for read accesses.
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Please refer to the AN4838 <20>Managing memory protection unit (MPU) in STM32 MCUs<55>
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Please refer to the AN4839 <20>Level 1 cache on STM32F7 Series<65>
|
||
|
||
@par Directory contents
|
||
|
||
- RNG/RNG_MultiRNG/Inc/stm32f7xx_hal_conf.h HAL configuration file
|
||
- RNG/RNG_MultiRNG/Inc/stm32f7xx_it.h Interrupt handlers header file
|
||
- RNG/RNG_MultiRNG/Inc/main.h Header for main.c module
|
||
- RNG/RNG_MultiRNG/Src/stm32f7xx_it.c Interrupt handlers
|
||
- RNG/RNG_MultiRNG/Src/main.c Main program
|
||
- RNG/RNG_MultiRNG/Src/stm32f7xx_hal_msp.c HAL MSP module
|
||
- RNG/RNG_MultiRNG/Src/system_stm32f7xx.c STM32F7xx system source file
|
||
|
||
|
||
@par Hardware and Software environment
|
||
|
||
- This example runs on STM32F76xxx/STM32F76xxx devices.
|
||
|
||
- This example has been tested with STM32769I-Discovery board and can be
|
||
easily tailored to any other supported device and development board.
|
||
|
||
@par How to use it ?
|
||
|
||
In order to make the program work, you must do the following:
|
||
- Open your preferred toolchain
|
||
- Rebuild all files and load your image into target memory
|
||
- Run the example
|
||
|
||
|
||
*/
|
||
|