/**
@page ADC_SingleConversion_TriggerTimer_DMA ADC example
@verbatim
******************************************************************************
* @file Examples_LL/ADC/ADC_SingleConversion_TriggerTimer_DMA/readme.txt
* @author MCD Application Team
* @brief Description of the ADC_SingleConversion_TriggerTimer_DMA example.
******************************************************************************
* @attention
*
* Copyright (c) 2016 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
@endverbatim
@par Example Description
How to use an ADC peripheral to perform a single ADC conversion on a channel
at each trigger event from a timer. Converted data is indefinitely transferred
by DMA into a table (circular mode).
This example is based on the STM32F7xx ADC LL API;
peripheral initialization done using LL unitary services functions
for optimization purpose (performance and size).
Example configuration:
ADC is configured to convert a single channel, in single conversion mode,
from HW trigger: timer peripheral.
DMA is configured to transfer conversion data in an array, in circular mode.
A timer is configured in time base and to generate TRGO events.
Example execution:
From the first press on push button, the ADC performs 1 conversion of the selected
channel at each trig from timer.
DMA transfers conversion data to the array.
When DMA reaches the selected number of transfers,
DMA half transfer and transfer complete interruptions occurs.
Data array is updated indefinitely (DMA in circular mode).
LED1 is turned off at DMA half transfer and turned on at DMA transfer complete.
For debug: variables to monitor with debugger watch window:
- "aADCxConvertedData": ADC group regular conversion data
- "aADCxConvertedData_Voltage_mVolt": ADC conversion data computation to physical values (array of data)
Connection needed:
None.
Note: Optionally, a voltage can be supplied to the analog input pin (cf pin below),
between 0V and Vdda=3.3V, to perform a ADC conversion on a determined
voltage level.
Otherwise, this pin can be let floating (in this case ADC conversion data
will be undetermined).
Other peripherals used:
1 GPIO for push button
1 GPIO for LED1
1 GPIO for analog input: PA.04 (connector CN7 pin 17)
DMA
Timer
@par Keywords
Analog, ADC, Analog to Digital, Single conversion, Timer trigger, DMA, circular mode
@Note<74>If the user code size exceeds the DTCM-RAM size or starts from internal cacheable memories (SRAM1 and SRAM2),that is shared between several processors,
<20><><A0><A0><A0>then it is highly recommended to enable the CPU cache and maintain its coherence at application level.
<0A><><A0><A0><A0><A0>The address and the size of cacheable buffers (shared between CPU and other masters) must be properly updated to be aligned to cache line size (32 bytes).
@Note It is recommended to enable the cache and maintain its coherence, but depending on the use case
<0A><><A0><A0><A0> It is also possible to configure the MPU as "Write through", to guarantee the write access coherence.
<0A><><A0><A0><A0><A0>In that case, the MPU must be configured as Cacheable/Bufferable/Not Shareable.
<0A><><A0><A0><A0><A0>Even though the user must manage the cache coherence for read accesses.
<0A><><A0><A0><A0><A0>Please refer to the AN4838 <20>Managing memory protection unit (MPU) in STM32 MCUs<55>
<0A><><A0><A0><A0><A0>Please refer to the AN4839 <20>Level 1 cache on STM32F7 Series<65>
@par Directory contents
- ADC/ADC_SingleConversion_TriggerTimer_DMA/Inc/stm32f7xx_it.h Interrupt handlers header file
- ADC/ADC_SingleConversion_TriggerTimer_DMA/Inc/main.h Header for main.c module
- ADC/ADC_SingleConversion_TriggerTimer_DMA/Inc/stm32_assert.h Template file to include assert_failed function
- ADC/ADC_SingleConversion_TriggerTimer_DMA/Src/stm32f7xx_it.c Interrupt handlers
- ADC/ADC_SingleConversion_TriggerTimer_DMA/Src/main.c Main program
- ADC/ADC_SingleConversion_TriggerTimer_DMA/Src/system_stm32f7xx.c STM32F7xx system source file
@par Hardware and Software environment
- This example runs on STM32F767xx devices.
- This example has been tested with NUCLEO-F767ZI board and can be
easily tailored to any other supported device and development board.
@par How to use it ?
In order to make the program work, you must do the following :
- Open your preferred toolchain
- Rebuild all files and load your image into target memory
- Run the example
*/
767d083e20