102 lines
4.8 KiB
Plaintext
102 lines
4.8 KiB
Plaintext
/**
|
||
@page Templates Description of the Templates example
|
||
|
||
@verbatim
|
||
******************************************************************************
|
||
* @file Templates/readme.txt
|
||
* @author MCD Application Team
|
||
* @brief Description of the Templates example.
|
||
******************************************************************************
|
||
* @attention
|
||
*
|
||
* Copyright (c) 2016 STMicroelectronics.
|
||
* All rights reserved.
|
||
*
|
||
* This software is licensed under terms that can be found in the LICENSE file
|
||
* in the root directory of this software component.
|
||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||
*
|
||
******************************************************************************
|
||
@endverbatim
|
||
|
||
@par Example Description
|
||
|
||
This directory provides a reference template project that can be used to build any firmware application for
|
||
STM32F756xx/STM32F746xx devices using STM32CubeF7 HAL and running on STM327x6G-EVAL board from STMicroelectronics.
|
||
|
||
This template provides two workspaces:
|
||
- STM32756G_EVAL(AXIM-FLASH): using the Flash AXIM interface (Cache & MPU features)
|
||
- STM32756G_EVAL(ITCM-FLASH): using the Flash ITCM interface (ART Accelerator)
|
||
|
||
The template includes also function used to enable the CPU Cache : CPU_CACHE_Enable().
|
||
This function is provided as template implementation that User may integrate in his application,
|
||
to enhance the performance in case of use of AXI interface with several masters.
|
||
|
||
@note Some code parts can be executed in the ITCM-RAM (16 KB) which decrease critical task execution time, compared
|
||
to code execution from Flash memory. This feature can be activated using '#pragma location = ".itcmram"' to be
|
||
placed above function declaration, or using the toolchain GUI (file options) to execute a whole source file in
|
||
the ITCM-RAM.
|
||
|
||
@note Care must be taken when using HAL_Delay(), this function provides accurate delay (in milliseconds)
|
||
based on variable incremented in SysTick ISR. This implies that if HAL_Delay() is called from
|
||
a peripheral ISR process, then the SysTick interrupt must have higher priority (numerically lower)
|
||
than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
|
||
To change the SysTick interrupt priority you have to use HAL_NVIC_SetPriority() function.
|
||
|
||
@note The application needs to ensure that the SysTick time base is always set to 1 millisecond
|
||
to have correct HAL operation.
|
||
|
||
|
||
@par Keywords
|
||
|
||
Reference, Template, CPU Cache
|
||
|
||
@Note<74>If the user code size exceeds the DTCM-RAM size or starts from internal cacheable memories (SRAM1 and SRAM2),that is shared between several processors,
|
||
<20><><EFBFBD><EFBFBD><EFBFBD>then it is highly recommended to enable the CPU cache and maintain its coherence at application level.
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>The address and the size of cacheable buffers (shared between CPU and other masters) must be properly updated to be aligned to cache line size (32 bytes).
|
||
|
||
@Note It is recommended to enable the cache and maintain its coherence, but depending on the use case
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> It is also possible to configure the MPU as "Write through", to guarantee the write access coherence.
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>In that case, the MPU must be configured as Cacheable/Bufferable/Not Shareable.
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Even though the user must manage the cache coherence for read accesses.
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Please refer to the AN4838 <20>Managing memory protection unit (MPU) in STM32 MCUs<55>
|
||
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Please refer to the AN4839 <20>Level 1 cache on STM32F7 Series<65>
|
||
|
||
@par Directory contents
|
||
|
||
- Templates/Src/main.c Main program
|
||
- Templates/Src/system_stm32f7xx.c STM32F7xx system clock configuration file
|
||
- Templates/Src/stm32f7xx_it.c Interrupt handlers
|
||
- Templates/Src/stm32f7xx_hal_msp.c HAL MSP module
|
||
- Templates/Inc/main.h Main program header file
|
||
- Templates/Inc/stm32f7xx_hal_conf.h HAL Configuration file
|
||
- Templates/Inc/stm32f7xx_it.h Interrupt handlers header file
|
||
|
||
|
||
@par Hardware and Software environment
|
||
|
||
- This example runs on STM32F756xx/STM32F746xx devices.
|
||
|
||
- This example has been tested with STMicroelectronics STM327x6G-EVAL revB
|
||
evaluation boards and can be easily tailored to any other supported device
|
||
and development board.
|
||
|
||
|
||
@par How to use it ?
|
||
|
||
In order to make the program work, you must do the following :
|
||
- Open your preferred toolchain
|
||
- Rebuild all files and load your image into target memory
|
||
- Run the example
|
||
|
||
In order to load the Flash_ITCM configuration, you must follow the instructions below :
|
||
- Open EWARM/SW4STM32 toolchain
|
||
- Rebuild all files
|
||
- Open STM32 ST-Link Utility V3.9.0
|
||
- Connect the STM32F756_EVAL board to PC with USB cable through CN21
|
||
- Use the corresponding hex file with ST-Link Utility to program ITCM Flash :
|
||
- EWARM: "Project.hex"
|
||
- SW4STM32: "STM327x6G_EVAL_ITCM-FLASH.hex"
|
||
|
||
|
||
*/ |