65 lines
2.3 KiB
Plaintext
65 lines
2.3 KiB
Plaintext
/**
|
|
@page UTILS_ReadDeviceInfo UTILS example
|
|
|
|
@verbatim
|
|
******************** (C) COPYRIGHT 2017 STMicroelectronics *******************
|
|
* @file Examples_LL/UTILS/UTILS_ReadDeviceInfo/readme.txt
|
|
* @author MCD Application Team
|
|
* @brief Description of the UTILS example.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2017 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
@endverbatim
|
|
|
|
@par Example Description
|
|
|
|
This example describes how to read UID, Device ID and Revision ID and save
|
|
them into a global information buffer.
|
|
|
|
Then UID, Device ID and Revision ID will be saved in following global variables:
|
|
- aShowDeviceID: Device identifier
|
|
- aShowRevisionID: Revision identifier (This field indicates the revision of the device.
|
|
For example, it is read as 0x1000 for Revision 1.0)
|
|
- aShowCoordinate: X and Y coordinates on the wafer expressed in BCD format
|
|
- aShowWaferNumber: WAF_NUM[7:0], Wafer number (8-bit unsigned number)
|
|
- aShowLotNumber: LOT_NUM[55:0], Lot number (ASCII encoded)
|
|
|
|
@par Keywords
|
|
|
|
System, Utils, Device info, UID, Device ID, Revision ID, Wafer, Lot number,
|
|
|
|
@par Directory contents
|
|
|
|
- UTILS/UTILS_ReadDeviceInfo/Inc/stm32f4xx_it.h Interrupt handlers header file
|
|
- UTILS/UTILS_ReadDeviceInfo/Inc/main.h Header for main.c module
|
|
- UTILS/UTILS_ReadDeviceInfo/Src/stm32f4xx_it.c Interrupt handlers
|
|
- UTILS/UTILS_ReadDeviceInfo/Src/main.c Main program
|
|
- UTILS/UTILS_ReadDeviceInfo/Src/system_stm32f4xx.c STM32F4xx system source file
|
|
|
|
|
|
@par Hardware and Software environment
|
|
|
|
- This example runs on STM32F411xx devices.
|
|
|
|
- This example has been tested with NUCLEO-F411RE board and can be
|
|
easily tailored to any other supported device and development board.
|
|
|
|
|
|
@par How to use it ?
|
|
|
|
In order to make the program work, you must do the following :
|
|
- Open your preferred toolchain
|
|
- Rebuild all files and load your image into target memory
|
|
- Run the example
|
|
|
|
|
|
*/
|