90 lines
3.4 KiB
Plaintext
90 lines
3.4 KiB
Plaintext
/**
|
|
@page ADC_SingleConversion_TriggerSW ADC example
|
|
|
|
@verbatim
|
|
******************** (C) COPYRIGHT 2017 STMicroelectronics *******************
|
|
* @file Examples_LL/ADC/ADC_SingleConversion_TriggerSW/readme.txt
|
|
* @author MCD Application Team
|
|
* @brief Description of the ADC_SingleConversion_TriggerSW example.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2017 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
@endverbatim
|
|
|
|
@par Example Description
|
|
This example describes how to use a ADC peripheral to perform
|
|
a single ADC conversion of a channel, at each software start;
|
|
Example using programming model: polling
|
|
(for programming models interrupt or DMA transfer, refer to
|
|
other examples);
|
|
This example is based on the STM32F4xx ADC LL API;
|
|
peripheral initialization done using LL unitary services functions
|
|
for optimization purpose (performance and size).
|
|
|
|
Example configuration:
|
|
ADC is configured to convert a single channel, in single conversion mode,
|
|
from SW trigger.
|
|
|
|
Example execution:
|
|
At each press on User Button, the ADC performs 1 conversion of the selected channel.
|
|
Software polls for conversion completion.
|
|
When conversion is completed, main program reads conversion data
|
|
from ADC data register and stores it into a variable, LED2 is turned on.
|
|
|
|
For debug: variables to monitor with debugger watch window:
|
|
- "uhADCxConvertedData": ADC group regular conversion data
|
|
- "uhADCxConvertedData_Voltage_mVolt": ADC conversion data computation to physical values
|
|
|
|
Connection needed:
|
|
None.
|
|
Note: Optionally, a voltage can be supplied to the analog input pin (cf pin below),
|
|
between 0V and Vdda=3.3V, to perform a ADC conversion on a determined
|
|
voltage level.
|
|
Otherwise, this pin can be let floating (in this case ADC conversion data
|
|
will be undetermined).
|
|
|
|
Other peripherals used:
|
|
1 GPIO for User Button
|
|
1 GPIO for LED2
|
|
1 GPIO for analog input: PA.04 (Arduino connector CN8 pin A2, Morpho connector CN7 pin 32)
|
|
|
|
@par Keywords
|
|
|
|
Analog, ADC, Analog to Digital, single conversion , Software trigger, Polling
|
|
|
|
@par Directory contents
|
|
|
|
- ADC/ADC_SingleConversion_TriggerSW/Inc/stm32f4xx_it.h Interrupt handlers header file
|
|
- ADC/ADC_SingleConversion_TriggerSW/Inc/main.h Header for main.c module
|
|
- ADC/ADC_SingleConversion_TriggerSW/Inc/stm32_assert.h Template file to include assert_failed function
|
|
- ADC/ADC_SingleConversion_TriggerSW/Src/stm32f4xx_it.c Interrupt handlers
|
|
- ADC/ADC_SingleConversion_TriggerSW/Src/main.c Main program
|
|
- ADC/ADC_SingleConversion_TriggerSW/Src/system_stm32f4xx.c STM32F4xx system source file
|
|
|
|
|
|
@par Hardware and Software environment
|
|
|
|
- This example runs on STM32F411xx devices.
|
|
|
|
- This example has been tested with NUCLEO-F411RE board and can be
|
|
easily tailored to any other supported device and development board.
|
|
|
|
|
|
@par How to use it ?
|
|
|
|
In order to make the program work, you must do the following :
|
|
- Open your preferred toolchain
|
|
- Rebuild all files and load your image into target memory
|
|
- Run the example
|
|
|
|
|
|
*/
|