OrgST-Microelectronics
/
STM32CubeF4
mirror of https://github.com/STMicroelectronics/STM32CubeF4.git
1
0
Fork 0
Code Issues Releases Wiki Activity
STM32CubeF4/Drivers/BSP/STM32469I-Discovery/stm32469i_discovery_ts.c

462 lines
14 KiB
C
Raw Blame History

/**
******************************************************************************
* @file stm32469i_discovery_ts.c
* @author MCD Application Team
* @brief This file provides a set of functions needed to manage the Touch
* Screen on STM32469I-Discovery board.
******************************************************************************
* @attention
*
* Copyright (c) 2017 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* File Info : -----------------------------------------------------------------
User NOTES
1. How To use this driver:
--------------------------
- This driver is used to drive the touch screen module of the STM32469I-Discovery
board on the K.O.D Optica Technology 480x800 TFT-LCD mounted on
MB1189 board. The touch screen driver IC inside the K.O.D module KM-040TMP-02
is a FT6206 by Focal Tech.
2. Driver description:
---------------------
+ Initialization steps:
o Initialize the TS module using the BSP_TS_Init() function. This
function includes the MSP layer hardware resources initialization and the
communication layer configuration to start the TS use. The LCD size properties
(x and y) are passed as parameters.
o If TS interrupt mode is desired, you must configure the TS interrupt mode
by calling the function BSP_TS_ITConfig(). The TS interrupt mode is generated
as an external interrupt whenever a touch is detected.
The interrupt mode internally uses the IO functionalities driver driven by
the IO expander, to configure the IT line.
+ Touch screen use
o The touch screen state is captured whenever the function BSP_TS_GetState() is
used. This function returns information about the last LCD touch occurred
in the TS_StateTypeDef structure.
o If TS interrupt mode is used, the function BSP_TS_ITGetStatus() is needed to get
the interrupt status. To clear the IT pending bits, you should call the
function BSP_TS_ITClear().
o The IT is handled using the corresponding external interrupt IRQ handler,
the user IT callback treatment is implemented on the same external interrupt
callback.
------------------------------------------------------------------------------*/
/* Includes ------------------------------------------------------------------*/
#include "stm32469i_discovery_ts.h"
/** @addtogroup BSP
* @{
*/
/** @addtogroup STM32469I_Discovery
* @{
*/
/** @defgroup STM32469I-Discovery_TS STM32469I Discovery TS
* @{
*/
/** @defgroup STM32469I-Discovery_TS_Private_Types_Definitions STM32469I Discovery TS Private Types Definitions
* @{
*/
/**
* @}
*/
/** @defgroup STM32469I-Discovery_TS_Private_Defines STM32469I Discovery TS Private Types Defines
* @{
*/
/**
* @}
*/
/** @defgroup STM32469I-Discovery_TS_Private_Macros STM32469I Discovery TS Private Macros
* @{
*/
/**
* @}
*/
/** @defgroup STM32469I-Discovery_TS_Imported_Variables STM32469I Discovery TS Imported Variables
* @{
*/
/**
* @}
*/
/** @defgroup STM32469I-Discovery_TS_Private_Variables STM32469I Discovery TS Private Variables
* @{
*/
static TS_DrvTypeDef *ts_driver;
static uint8_t ts_orientation;
uint8_t I2C_Address = 0;
/* Table for touchscreen event information display on LCD : table indexed on enum @ref TS_TouchEventTypeDef information */
char * ts_event_string_tab[TOUCH_EVENT_NB_MAX] = { "None",
"Press down",
"Lift up",
"Contact"
};
/* Table for touchscreen gesture Id information display on LCD : table indexed on enum @ref TS_GestureIdTypeDef information */
char * ts_gesture_id_string_tab[GEST_ID_NB_MAX] = { "None",
"Move Up",
"Move Right",
"Move Down",
"Move Left",
"Zoom In",
"Zoom Out"
};
/**
* @}
*/
/** @defgroup STM32469I-Discovery_TS_Private_Function_Prototypes STM32469I Discovery TS Private Function Prototypes
* @{
*/
/**
* @}
*/
/** @defgroup STM32469I-Discovery_TS_Public_Functions STM32469I Discovery TS Public Functions
* @{
*/
/**
* @brief Initializes and configures the touch screen functionalities and
* configures all necessary hardware resources (GPIOs, I2C, clocks..).
* @param ts_SizeX : Maximum X size of the TS area on LCD
* @param ts_SizeY : Maximum Y size of the TS area on LCD
* @retval TS_OK if all initializations are OK. Other value if error.
*/
uint8_t BSP_TS_Init(uint16_t ts_SizeX, uint16_t ts_SizeY)
{
uint8_t ts_status = TS_OK;
uint8_t ts_id1, ts_id2 = 0;
/* Note : I2C_Address is un-initialized here, but is not used at all in init function */
/* but the prototype of Init() is like that in template and should be respected */
/* Initialize the communication channel to sensor (I2C) if necessary */
/* that is initialization is done only once after a power up */
ft6x06_ts_drv.Init(I2C_Address);
ts_id1 = ft6x06_ts_drv.ReadID(TS_I2C_ADDRESS);
if(ts_id1 != FT6206_ID_VALUE)
{
ts_id2 = ft6x06_ts_drv.ReadID(TS_I2C_ADDRESS_A02);
I2C_Address = TS_I2C_ADDRESS_A02;
}
else
{
I2C_Address = TS_I2C_ADDRESS;
}
/* Scan FT6xx6 TouchScreen IC controller ID register by I2C Read */
/* Verify this is a FT6206 or FT6336G, otherwise this is an error case */
if((ts_id1 == FT6206_ID_VALUE) || (ts_id2 == FT6206_ID_VALUE) || (ts_id2 == FT6X36_ID2_VALUE))
{
/* Found FT6206 : Initialize the TS driver structure */
ts_driver = &ft6x06_ts_drv;
/* Get LCD chosen orientation */
if(ts_SizeX < ts_SizeY)
{
ts_orientation = TS_SWAP_NONE;
}
else
{
ts_orientation = TS_SWAP_XY | TS_SWAP_Y;
}
if(ts_status == TS_OK)
{
/* Software reset the TouchScreen */
ts_driver->Reset(I2C_Address);
/* Calibrate, Configure and Start the TouchScreen driver */
ts_driver->Start(I2C_Address);
} /* of if(ts_status == TS_OK) */
}
else
{
ts_status = TS_DEVICE_NOT_FOUND;
}
return (ts_status);
}
/**
* @brief Configures and enables the touch screen interrupts both at GPIO level and
* in TouchScreen IC driver configuration.
* @retval TS_OK if all initializations are OK.
*/
uint8_t BSP_TS_ITConfig(void)
{
uint8_t ts_status = TS_OK;
GPIO_InitTypeDef gpio_init_structure;
/* Msp Init of GPIO used for TS_INT pin coming from TouchScreen driver IC FT6x06 */
/* When touchscreen is operated in interrupt mode */
BSP_TS_INT_MspInit();
/* Configure Interrupt mode for TS_INT pin falling edge : when a new touch is available */
/* TS_INT pin is active on low level on new touch available */
gpio_init_structure.Pin = TS_INT_PIN;
gpio_init_structure.Pull = GPIO_PULLUP;
gpio_init_structure.Speed = GPIO_SPEED_FAST;
gpio_init_structure.Mode = GPIO_MODE_IT_FALLING;
HAL_GPIO_Init(TS_INT_GPIO_PORT, &gpio_init_structure);
/* Enable and set the TS_INT EXTI Interrupt to an intermediate priority */
HAL_NVIC_SetPriority((IRQn_Type)(TS_INT_EXTI_IRQn), 0x05, 0x00);
HAL_NVIC_EnableIRQ((IRQn_Type)(TS_INT_EXTI_IRQn));
/* Enable the TS in interrupt mode */
/* In that case the INT output of FT6206 when new touch is available */
/* is active on low level and directed on EXTI */
ts_driver->EnableIT(I2C_Address);
return (ts_status);
}
/**
* @brief Returns status and positions of the touch screen.
* @param TS_State: Pointer to touch screen current state structure
* @retval TS_OK if all initializations are OK. Other value if error.
*/
uint8_t BSP_TS_GetState(TS_StateTypeDef *TS_State)
{
static uint32_t _x[TS_MAX_NB_TOUCH] = {0, 0};
static uint32_t _y[TS_MAX_NB_TOUCH] = {0, 0};
uint8_t ts_status = TS_OK;
uint16_t tmp;
uint16_t Raw_x[TS_MAX_NB_TOUCH];
uint16_t Raw_y[TS_MAX_NB_TOUCH];
uint16_t xDiff;
uint16_t yDiff;
uint32_t index;
#if (TS_MULTI_TOUCH_SUPPORTED == 1)
uint32_t weight = 0;
uint32_t area = 0;
uint32_t event = 0;
#endif /* TS_MULTI_TOUCH_SUPPORTED == 1 */
/* Check and update the number of touches active detected */
TS_State->touchDetected = ts_driver->DetectTouch(I2C_Address);
if(TS_State->touchDetected)
{
for(index=0; index < TS_State->touchDetected; index++)
{
/* Get each touch coordinates */
ts_driver->GetXY(I2C_Address, &(Raw_x[index]), &(Raw_y[index]));
if(ts_orientation & TS_SWAP_XY)
{
tmp = Raw_x[index];
Raw_x[index] = Raw_y[index];
Raw_y[index] = tmp;
}
if(ts_orientation & TS_SWAP_X)
{
Raw_x[index] = FT_6206_MAX_WIDTH - 1 - Raw_x[index];
}
if(ts_orientation & TS_SWAP_Y)
{
Raw_y[index] = FT_6206_MAX_HEIGHT - 1 - Raw_y[index];
}
xDiff = Raw_x[index] > _x[index]? (Raw_x[index] - _x[index]): (_x[index] - Raw_x[index]);
yDiff = Raw_y[index] > _y[index]? (Raw_y[index] - _y[index]): (_y[index] - Raw_y[index]);
if ((xDiff + yDiff) > 5)
{
_x[index] = Raw_x[index];
_y[index] = Raw_y[index];
}
TS_State->touchX[index] = _x[index];
TS_State->touchY[index] = _y[index];
#if (TS_MULTI_TOUCH_SUPPORTED == 1)
/* Get touch info related to the current touch */
ft6x06_TS_GetTouchInfo(I2C_Address, index, &weight, &area, &event);
/* Update TS_State structure */
TS_State->touchWeight[index] = weight;
TS_State->touchArea[index] = area;
/* Remap touch event */
switch(event)
{
case FT6206_TOUCH_EVT_FLAG_PRESS_DOWN :
TS_State->touchEventId[index] = TOUCH_EVENT_PRESS_DOWN;
break;
case FT6206_TOUCH_EVT_FLAG_LIFT_UP :
TS_State->touchEventId[index] = TOUCH_EVENT_LIFT_UP;
break;
case FT6206_TOUCH_EVT_FLAG_CONTACT :
TS_State->touchEventId[index] = TOUCH_EVENT_CONTACT;
break;
case FT6206_TOUCH_EVT_FLAG_NO_EVENT :
TS_State->touchEventId[index] = TOUCH_EVENT_NO_EVT;
break;
default :
ts_status = TS_ERROR;
break;
} /* of switch(event) */
#endif /* TS_MULTI_TOUCH_SUPPORTED == 1 */
} /* of for(index=0; index < TS_State->touchDetected; index++) */
#if (TS_MULTI_TOUCH_SUPPORTED == 1)
/* Get gesture Id */
ts_status = BSP_TS_Get_GestureId(TS_State);
#endif /* TS_MULTI_TOUCH_SUPPORTED == 1 */
} /* end of if(TS_State->touchDetected != 0) */
return (ts_status);
}
#if (TS_MULTI_TOUCH_SUPPORTED == 1)
/**
* @brief Update gesture Id following a touch detected.
* @param TS_State: Pointer to touch screen current state structure
* @retval TS_OK if all initializations are OK. Other value if error.
*/
uint8_t BSP_TS_Get_GestureId(TS_StateTypeDef *TS_State)
{
uint32_t gestureId = 0;
uint8_t ts_status = TS_OK;
/* Get gesture Id */
ft6x06_TS_GetGestureID(I2C_Address, &gestureId);
/* Remap gesture Id to a TS_GestureIdTypeDef value */
switch(gestureId)
{
case FT6206_GEST_ID_NO_GESTURE :
TS_State->gestureId = GEST_ID_NO_GESTURE;
break;
case FT6206_GEST_ID_MOVE_UP :
TS_State->gestureId = GEST_ID_MOVE_UP;
break;
case FT6206_GEST_ID_MOVE_RIGHT :
TS_State->gestureId = GEST_ID_MOVE_RIGHT;
break;
case FT6206_GEST_ID_MOVE_DOWN :
TS_State->gestureId = GEST_ID_MOVE_DOWN;
break;
case FT6206_GEST_ID_MOVE_LEFT :
TS_State->gestureId = GEST_ID_MOVE_LEFT;
break;
case FT6206_GEST_ID_ZOOM_IN :
TS_State->gestureId = GEST_ID_ZOOM_IN;
break;
case FT6206_GEST_ID_ZOOM_OUT :
TS_State->gestureId = GEST_ID_ZOOM_OUT;
break;
default :
ts_status = TS_ERROR;
break;
} /* of switch(gestureId) */
return(ts_status);
}
/** @defgroup STM32469I-Discovery_TS_Private_Functions STM32469I Discovery TS Private Functions
* @{
*/
/**
* @brief Function used to reset all touch data before a new acquisition
* of touch information.
* @param TS_State: Pointer to touch screen current state structure
* @retval TS_OK if OK, TE_ERROR if problem found.
*/
uint8_t BSP_TS_ResetTouchData(TS_StateTypeDef *TS_State)
{
uint8_t ts_status = TS_ERROR;
uint32_t index;
if (TS_State != (TS_StateTypeDef *)NULL)
{
TS_State->gestureId = GEST_ID_NO_GESTURE;
TS_State->touchDetected = 0;
for(index = 0; index < TS_MAX_NB_TOUCH; index++)
{
TS_State->touchX[index] = 0;
TS_State->touchY[index] = 0;
TS_State->touchArea[index] = 0;
TS_State->touchEventId[index] = TOUCH_EVENT_NO_EVT;
TS_State->touchWeight[index] = 0;
}
ts_status = TS_OK;
} /* of if (TS_State != (TS_StateTypeDef *)NULL) */
return (ts_status);
}
#endif /* TS_MULTI_TOUCH_SUPPORTED == 1 */
/**
* @brief Initializes the TS_INT pin MSP.
*/
__weak void BSP_TS_INT_MspInit(void)
{
GPIO_InitTypeDef gpio_init_structure;
TS_INT_GPIO_CLK_ENABLE();
/* GPIO configuration in input for TouchScreen interrupt signal on TS_INT pin */
gpio_init_structure.Pin = TS_INT_PIN;
gpio_init_structure.Mode = GPIO_MODE_INPUT;
gpio_init_structure.Pull = GPIO_PULLUP;
gpio_init_structure.Speed = GPIO_SPEED_HIGH;
HAL_GPIO_Init(TS_INT_GPIO_PORT, &gpio_init_structure);
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
Reference in New Issue View Git Blame Copy Permalink