75 lines
3.0 KiB
Plaintext
75 lines
3.0 KiB
Plaintext
/**
|
|
@page FreeRTOS_Timers FreeRTOS Timers application
|
|
|
|
@verbatim
|
|
******************** (C) COPYRIGHT 2017 STMicroelectronics *******************
|
|
* @file FreeRTOS/FreeRTOS_Timers/readme.txt
|
|
* @author MCD Application Team
|
|
* @brief Description of the FreeRTOS Timers application.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2017 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
@endverbatim
|
|
|
|
@par Application Description
|
|
|
|
How to use timers of CMSIS RTOS API.
|
|
|
|
This application creates a thread that toggles LED2 every 400 ms, and a periodic
|
|
timer that calls a callback function every 200 ms to toggle the LED1.
|
|
|
|
|
|
@note Care must be taken when using HAL_Delay(), this function provides accurate delay (in milliseconds)
|
|
based on variable incremented in SysTick ISR. This implies that if HAL_Delay() is called from
|
|
a peripheral ISR process, then the SysTick interrupt must have higher priority (numerically lower)
|
|
than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
|
|
To change the SysTick interrupt priority you have to use HAL_NVIC_SetPriority() function.
|
|
|
|
@note The application needs to ensure that the SysTick time base is always set to 1 millisecond
|
|
to have correct HAL operation.
|
|
|
|
@note The FreeRTOS heap size configTOTAL_HEAP_SIZE defined in FreeRTOSConfig.h is set according to the OS resources memory requirements of the application with +10% margin and rounded to the upper Kbyte boundary.
|
|
|
|
For more details about FreeRTOS implementation on STM32Cube, please refer to UM1722 "Developing Applications
|
|
on STM32Cube with RTOS".
|
|
|
|
@par Keywords
|
|
|
|
RTOS, FreeRTOS, Threading, Timer
|
|
|
|
@par Directory contents
|
|
|
|
- FreeRTOS/FreeRTOS_Timers/Inc/main.h Main program header file
|
|
- FreeRTOS/FreeRTOS_Timers/Inc/stm32f4xx_hal_conf.h HAL Library Configuration file
|
|
- FreeRTOS/FreeRTOS_Timers/Inc/stm32f4xx_it.h Interrupt handlers header file
|
|
- FreeRTOS/FreeRTOS_Timers/Inc/FreeRTOSConfig.h FreeRTOS Configuration file
|
|
- FreeRTOS/FreeRTOS_Timers/Src/main.c Main program
|
|
- FreeRTOS/FreeRTOS_Timers/Src/stm32f4xx_it.c Interrupt handlers
|
|
|
|
|
|
@par Hardware and Software environment
|
|
|
|
- This application runs on STM32F42xxx/STM32F43xxx devices
|
|
|
|
- This application has been tested with STM324x9I-EVAL RevB evaluation board and can be
|
|
easily tailored to any other supported device and development board.
|
|
|
|
|
|
@par How to use it ?
|
|
|
|
In order to make the program work, you must do the following :
|
|
- Open your preferred toolchain
|
|
- Rebuild all files and load your image into target memory
|
|
- Run the application
|
|
|
|
|
|
*/
|