105 lines
4.5 KiB
Plaintext
105 lines
4.5 KiB
Plaintext
/**
|
|
@page FreeRTOS_Mutexes FreeRTOS Mutexes application
|
|
|
|
@verbatim
|
|
******************** (C) COPYRIGHT 2017 STMicroelectronics *******************
|
|
* @file FreeRTOS/FreeRTOS_Mutexes/readme.txt
|
|
* @author MCD Application Team
|
|
* @brief Description of the FreeRTOS Mutexes application.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2017 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
@endverbatim
|
|
|
|
@par Application Description
|
|
|
|
How to use mutexes with CMSIS RTOS API.
|
|
|
|
This application creates three threads, with different priorities, that access the
|
|
same mutex, as described below:
|
|
|
|
MutexHighPriorityThread() has the highest priority so executes
|
|
first and grabs the mutex and sleeps for a short period to let the lower
|
|
priority threads execute. When it has completed its demo functionality
|
|
it gives the mutex back before suspending itself.
|
|
|
|
MutexMeduimPriorityThread() attempts to access the mutex by performing
|
|
a blocking 'wait'. This thread blocks when the mutex is already taken
|
|
by the high priority thread. It does not unblock until the highest
|
|
priority thread has released the mutex, and it does not actually run until
|
|
the highest priority thread has suspended itself.
|
|
When it eventually does obtain the mutex all it does is give the mutex back
|
|
prior to also suspending itself. At this point both the high and medium
|
|
priority threads are suspended.
|
|
|
|
MutexLowPriorityThread() runs at the idle priority. It spins round
|
|
a tight loop attempting to obtain the mutex with a non-blocking call. As
|
|
the lowest priority thread it will not successfully obtain the mutex until
|
|
both high and medium priority threads are suspended. Once it eventually
|
|
does obtain the mutex it first resume both suspended threads prior to giving
|
|
the mutex back - resulting in the low priority thread temporarily inheriting
|
|
the highest thread priority.
|
|
|
|
Add the following variables to LiveWatch, these variables must remain equals all the time:
|
|
- HighPriorityThreadCycles
|
|
- MediumPriorityThreadCycles
|
|
- LowPriorityThreadCycles
|
|
|
|
STM32 Eval boards LEDs can be used to monitor the application status:
|
|
- LED1, LED2 and LED4 should toggle when the application runs successfully.
|
|
- LED3 is ON when any error occurs.
|
|
|
|
@note Care must be taken when using HAL_Delay(), this function provides accurate delay (in milliseconds)
|
|
based on variable incremented in HAL time base ISR. This implies that if HAL_Delay() is called from
|
|
a peripheral ISR process, then the HAL time base interrupt must have higher priority (numerically lower)
|
|
than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
|
|
To change the HAL time base interrupt priority you have to use HAL_NVIC_SetPriority() function.
|
|
|
|
@note The application needs to ensure that the HAL time base is always set to 1 millisecond to have correct
|
|
HAL operation.
|
|
|
|
@note The FreeRTOS heap size configTOTAL_HEAP_SIZE defined in FreeRTOSConfig.h is set according to the OS resources memory requirements of the application with +10% margin and rounded to the upper Kbyte boundary.
|
|
|
|
For more details about FreeRTOS implementation on STM32Cube, please refer to UM1722 "Developing Applications
|
|
on STM32Cube with RTOS".
|
|
|
|
@par Keywords
|
|
|
|
RTOS, FreeRTOS, Threading, Mutexes
|
|
|
|
@par Directory contents
|
|
|
|
- FreeRTOS/FreeRTOS_Mutexes/Inc/main.h Main program header file
|
|
- FreeRTOS/FreeRTOS_Mutexes/Inc/stm32f4xx_hal_conf.h HAL Library Configuration file
|
|
- FreeRTOS/FreeRTOS_Mutexes/Inc/stm32f4xx_it.h Interrupt handlers header file
|
|
- FreeRTOS/FreeRTOS_Mutexes/Inc/FreeRTOSConfig.h FreeRTOS Configuration file
|
|
- FreeRTOS/FreeRTOS_Mutexes/Src/main.c Main program
|
|
- FreeRTOS/FreeRTOS_Mutexes/Src/stm32f4xx_it.c Interrupt handlers
|
|
|
|
|
|
@par Hardware and Software environment
|
|
|
|
- This application runs on STM32F42xxx/STM32F43xxx devices
|
|
|
|
- This application has been tested with STM324x9I-EVAL RevB evaluation board and can be
|
|
easily tailored to any other supported device and development board.
|
|
|
|
|
|
@par How to use it ?
|
|
|
|
In order to make the program work, you must do the following :
|
|
- Open your preferred toolchain
|
|
- Rebuild all files and load your image into target memory
|
|
- Run the application
|
|
|
|
|
|
*/
|