96 lines
3.9 KiB
Plaintext
96 lines
3.9 KiB
Plaintext
/**
|
|
@page FreeRTOS_LowPower FreeRTOS Low Power application
|
|
|
|
@verbatim
|
|
******************** (C) COPYRIGHT 2017 STMicroelectronics *******************
|
|
* @file FreeRTOS/FreeRTOS_LowPower/readme.txt
|
|
* @author MCD Application Team
|
|
* @brief Description of the FreeRTOS Low Power application.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2017 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
@endverbatim
|
|
|
|
@par Application Description
|
|
|
|
How to enter and exit low-power mode with CMSIS RTOS API.
|
|
|
|
This application creates two threads.
|
|
|
|
+ A Rx thread that blocks on a queue to wait for data, blinking LED each
|
|
time data is received (turning it on and then off again) before returning
|
|
to block on the queue once more.
|
|
|
|
+ A Tx thread that repeatedly enters the Blocked state for 500ms.
|
|
On exiting the blocked state the Tx thread sends a value through the queue
|
|
to the Rx thread (causing the Rx thread to exit the blocked state and blink
|
|
the LED).
|
|
|
|
Blocking for a finite period allows the kernel to stop the tick interrupt
|
|
and place the STM32 into sleep mode.
|
|
|
|
In this application, not used GPIO's are configured to analog, this help to reduce
|
|
the power consumption of the device
|
|
|
|
Observed behaviour:
|
|
|
|
Every 500ms the MCU will come out of the low power state to turn the LED1 on,
|
|
then return to the low power state for 20ms before leaving the low power
|
|
state again to turn the LED off. This will be observed as a fast blinking
|
|
on the LED1.
|
|
|
|
The RTOS tick is suppressed while the MCU is in its low power state.
|
|
|
|
@note Care must be taken when using HAL_Delay(), this function provides accurate delay (in milliseconds)
|
|
based on variable incremented in HAL time base ISR. This implies that if HAL_Delay() is called from
|
|
a peripheral ISR process, then the HAL time base interrupt must have higher priority (numerically lower)
|
|
than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
|
|
To change the HAL time base interrupt priority you have to use HAL_NVIC_SetPriority() function.
|
|
|
|
@note The application needs to ensure that the HAL time base is always set to 1 millisecond to have correct
|
|
HAL operation.
|
|
|
|
@note The FreeRTOS heap size configTOTAL_HEAP_SIZE defined in FreeRTOSConfig.h is set according to the OS resources memory requirements of the application with +10% margin and rounded to the upper Kbyte boundary.
|
|
|
|
For more details about FreeRTOS implementation on STM32Cube, please refer to UM1722 "Developing Applications
|
|
on STM32Cube with RTOS".
|
|
|
|
@par Keywords
|
|
|
|
RTOS, FreeRTOS, Low power, MPU
|
|
|
|
@par Directory contents
|
|
|
|
- FreeRTOS/FreeRTOS_LowPower/Inc/main.h Main program header file
|
|
- FreeRTOS/FreeRTOS_LowPower/Inc/stm32f4xx_hal_conf.h HAL Library Configuration file
|
|
- FreeRTOS/FreeRTOS_LowPower/Inc/stm32f4xx_it.h Interrupt handlers header file
|
|
- FreeRTOS/FreeRTOS_LowPower/Inc/FreeRTOSConfig.h FreeRTOS Configuration file
|
|
- FreeRTOS/FreeRTOS_LowPower/Src/main.c Main program
|
|
- FreeRTOS/FreeRTOS_LowPower/Src/stm32f4xx_it.c Interrupt handlers
|
|
|
|
@par Hardware and Software environment
|
|
|
|
- This application runs on STM32F42xxx/STM32F43xxx devices.
|
|
|
|
- This application has been tested with STM324x9I-EVAL evaluation board and can be
|
|
easily tailored to any other supported device and development board.
|
|
|
|
|
|
@par How to use it ?
|
|
|
|
In order to make the program work, you must do the following :
|
|
- Open your preferred toolchain
|
|
- Rebuild all files and load your image into target memory
|
|
- Run the application
|
|
|
|
|
|
*/
|