/**
@page IWDG_RefreshUntilUserEvent IWDG example
@verbatim
******************** (C) COPYRIGHT 2016 STMicroelectronics *******************
* @file Examples_LL/IWDG/IWDG_RefreshUntilUserEvent/readme.txt
* @author MCD Application Team
* @brief Description of the IWDG_RefreshUntilUserEvent example.
******************************************************************************
* @attention
*
* Copyright (c) 2016 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
@endverbatim
@par Example Description
How to configure the IWDG peripheral to ensure periodical counter update and
generate an MCU IWDG reset when a user button is pressed. The peripheral
is initialized with LL unitary service functions to optimize
for performance and size.
Example Configuration:
Configure the IWDG (prescaler, counter) and enable it.
Infinite refresh of the IWDG down-counter done in the main loop.
Led is blinking fast & continuously
Example Execution:
When User Button is pressed, the down-counter automatic refresh mechanism is
disable and thus, reset will occur. After a reset, when re-entering in the main,
RCC IWDG Reset Flag will be checked and if we are back from a IWDG reset the led
will be switch ON.
Waiting a new user button pressed to re-activate the IWDG
@par Directory contents
- IWDG/IWDG_RefreshUntilUserEvent/Inc/stm32f3xx_it.h Interrupt handlers header file
- IWDG/IWDG_RefreshUntilUserEvent/Inc/main.h Header for main.c module
- IWDG/IWDG_RefreshUntilUserEvent/Inc/stm32_assert.h Template file to include assert_failed function
- IWDG/IWDG_RefreshUntilUserEvent/Src/stm32f3xx_it.c Interrupt handlers
- IWDG/IWDG_RefreshUntilUserEvent/Src/main.c Main program
- IWDG/IWDG_RefreshUntilUserEvent/Src/system_stm32f3xx.c STM32F3xx system source file
@par Hardware and Software environment
- This example runs on STM32F334R8 devices.
- This example has been tested with STM32F334R8-Nucleo Rev C board and can be
easily tailored to any other supported device and development board.
@par How to use it ?
In order to make the program work, you must do the following :
- Open your preferred toolchain
- Rebuild all files and load your image into target memory
- Run the example
*/
e805a235c4