70 lines
2.9 KiB
Plaintext
70 lines
2.9 KiB
Plaintext
/**
|
|
@page CRC_CalculateAndCheck CRC : CRC calculation and computed CRC value checking
|
|
|
|
@verbatim
|
|
******************** (C) COPYRIGHT 2016 STMicroelectronics *******************
|
|
* @file Examples_LL/CRC/CRC_CalculateAndCheck/readme.txt
|
|
* @author MCD Application Team
|
|
* @brief Description of the CRC_CalculateAndCheck example.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2016 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
@endverbatim
|
|
|
|
@par Example Description
|
|
|
|
How to configure the CRC calculation unit to compute a CRC code for a given data
|
|
buffer, based on a fixed generator polynomial (default value 0x4C11DB7). The
|
|
peripheral initialization is done using LL unitary service functions for
|
|
optimization purposes (performance and size).
|
|
|
|
The CRC peripheral is configured to work with default polynomial value (32-bit long).
|
|
Normal representation of this polynomial value is :
|
|
X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + X^4 + X^2 + X + 1.
|
|
Generated CRC value is then 32 bits long.
|
|
|
|
Example execution:
|
|
After startup from reset and system configuration, CRC configuration is performed (use of default Polynomial and initialisation values).
|
|
CRC code of a given data buffer is computed.
|
|
Data buffer length has been chosen as not an exact nb of u32 (32-bit words), in order to illustrate
|
|
use of offered API for feeding the calculator (u32, u16 or u8 inputs).
|
|
The calculated CRC code is stored in uwCRCValue variable.
|
|
Once calculated, CRC value (uwCRCValue) is compared to the CRC expected value (uwExpectedCRCValue),
|
|
and if both are equal, LED is turned On.
|
|
In case of errors, LED is blinking (1sec period).
|
|
|
|
@par Directory contents
|
|
|
|
- CRC/CRC_CalculateAndCheck/Inc/stm32f3xx_it.h Interrupt handlers header file
|
|
- CRC/CRC_CalculateAndCheck/Inc/main.h Header for main.c module
|
|
- CRC/CRC_CalculateAndCheck/Inc/stm32_assert.h Template file to include assert_failed function
|
|
- CRC/CRC_CalculateAndCheck/Src/stm32f3xx_it.c Interrupt handlers
|
|
- CRC/CRC_CalculateAndCheck/Src/main.c Main program
|
|
- CRC/CRC_CalculateAndCheck/Src/system_stm32f3xx.c STM32F3xx system source file
|
|
|
|
|
|
@par Hardware and Software environment
|
|
|
|
- This example runs on STM32F334R8 devices.
|
|
|
|
- This example has been tested with STM32F334R8-Nucleo Rev C board and can be
|
|
easily tailored to any other supported device and development board.
|
|
|
|
@par How to use it ?
|
|
|
|
In order to make the program work, you must do the following :
|
|
- Open your preferred toolchain
|
|
- Rebuild all files and load your image into target memory
|
|
- Run the example
|
|
|
|
|
|
*/
|
|
|