STM32CubeF3/Projects/STM32F3348-Discovery/Templates_LL/Inc/main.h

112 lines
4.2 KiB
C

/**
******************************************************************************
* @file Templates_LL/Inc/main.h
* @author MCD Application Team
* @brief Header for main.c module
******************************************************************************
* @attention
*
* Copyright (c) 2016 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __MAIN_H
#define __MAIN_H
/* Includes ------------------------------------------------------------------*/
/* LL drivers common to all LL examples */
#include "stm32f3xx_ll_bus.h"
#include "stm32f3xx_ll_rcc.h"
#include "stm32f3xx_ll_system.h"
#include "stm32f3xx_ll_utils.h"
#include "stm32f3xx_ll_pwr.h"
#include "stm32f3xx_ll_exti.h"
#include "stm32f3xx_ll_gpio.h"
/* LL drivers specific to LL examples IPs */
#include "stm32f3xx_ll_adc.h"
#include "stm32f3xx_ll_comp.h"
#include "stm32f3xx_ll_cortex.h"
#include "stm32f3xx_ll_crc.h"
#include "stm32f3xx_ll_dac.h"
#include "stm32f3xx_ll_dma.h"
#include "stm32f3xx_ll_hrtim.h"
#include "stm32f3xx_ll_i2c.h"
#include "stm32f3xx_ll_iwdg.h"
#include "stm32f3xx_ll_opamp.h"
#include "stm32f3xx_ll_rtc.h"
#include "stm32f3xx_ll_spi.h"
#include "stm32f3xx_ll_tim.h"
#include "stm32f3xx_ll_usart.h"
#include "stm32f3xx_ll_wwdg.h"
#if defined(USE_FULL_ASSERT)
#include "stm32_assert.h"
#endif /* USE_FULL_ASSERT */
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* ============== BOARD SPECIFIC CONFIGURATION CODE BEGIN ============== */
/**
* @brief LED3
*/
#define LED3_PIN LL_GPIO_PIN_6
#define LED3_GPIO_PORT GPIOB
#define LED3_GPIO_CLK_ENABLE() LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOB)
/**
* @brief LED4
*/
#define LED4_PIN LL_GPIO_PIN_8
#define LED4_GPIO_PORT GPIOB
#define LED4_GPIO_CLK_ENABLE() LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOB)
/**
* @brief LED5
*/
#define LED5_PIN LL_GPIO_PIN_9
#define LED5_GPIO_PORT GPIOB
#define LED5_GPIO_CLK_ENABLE() LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOB)
/**
* @brief LED6
*/
#define LED6_PIN LL_GPIO_PIN_7
#define LED6_GPIO_PORT GPIOB
#define LED6_GPIO_CLK_ENABLE() LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOB)
/**
* @brief Key push-button
*/
#define USER_BUTTON_PIN LL_GPIO_PIN_10
#define USER_BUTTON_GPIO_PORT GPIOA
#define USER_BUTTON_GPIO_CLK_ENABLE() LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_GPIOA)
#define USER_BUTTON_EXTI_LINE LL_EXTI_LINE_0
#define USER_BUTTON_EXTI_IRQn EXTI0_IRQn
#define USER_BUTTON_EXTI_LINE_ENABLE() LL_EXTI_EnableIT_0_31(USER_BUTTON_EXTI_LINE)
#define USER_BUTTON_EXTI_FALLING_TRIG_ENABLE() LL_EXTI_EnableFallingTrig_0_31(USER_BUTTON_EXTI_LINE)
#define USER_BUTTON_SYSCFG_SET_EXTI() do { \
LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_SYSCFG); \
LL_SYSCFG_SetEXTISource(LL_SYSCFG_EXTI_PORTA, LL_SYSCFG_EXTI_LINE0); \
} while(0)
#define USER_BUTTON_IRQHANDLER EXTI0_IRQHandler
/* ============== BOARD SPECIFIC CONFIGURATION CODE END ============== */
/**
* @brief Toggle periods for various blinking modes
*/
#define LED_BLINK_FAST 200
#define LED_BLINK_SLOW 500
#define LED_BLINK_ERROR 1000
/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */
#endif /* __MAIN_H */