70 lines
2.7 KiB
Plaintext
70 lines
2.7 KiB
Plaintext
/**
|
|
@page Templates Description of the Templates example
|
|
|
|
@verbatim
|
|
******************** (C) COPYRIGHT 2016 STMicroelectronics *******************
|
|
* @file Templates/readme.txt
|
|
* @author MCD Application Team
|
|
* @brief Description of the Templates example.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2016 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
@endverbatim
|
|
|
|
@par Example Description
|
|
|
|
This projects provides a reference template that can be used to build any firmware application.
|
|
|
|
This project can be used for STM32F302R8 device using STM32CubeF3 HAL and running on STM32F302R8-Nucleo board
|
|
from STMicroelectronics.
|
|
|
|
STM32 Nucleo board's LED2 can be used to monitor the error: when Error_Handler is called, the LED2 toggles
|
|
with a frequency of 1Hz.
|
|
|
|
@note Care must be taken when using HAL_Delay(), this function provides accurate delay (in milliseconds)
|
|
based on variable incremented in SysTick ISR. This implies that if HAL_Delay() is called from
|
|
a peripheral ISR process, then the SysTick interrupt must have higher priority (numerically lower)
|
|
than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
|
|
To change the SysTick interrupt priority you have to use HAL_NVIC_SetPriority() function.
|
|
|
|
@note The application need to ensure that the SysTick time base is always set to 1 millisecond
|
|
to have correct HAL operation.
|
|
|
|
@par Directory contents
|
|
|
|
- Templates/Src/main.c Main program
|
|
- Templates/Src/system_stm32f3xx.c STM32F3xx system clock configuration file
|
|
- Templates/Src/stm32f3xx_it.c Interrupt handlers
|
|
- Templates/Src/stm32f3xx_hal_msp.c HAL MSP module
|
|
- Templates/Inc/main.h Main program header file
|
|
- Templates/Inc/stm32f3xx_hal_conf.h HAL Configuration file
|
|
- Templates/Inc/stm32f3xx_it.h Interrupt handlers header file
|
|
|
|
|
|
@par Hardware and Software environment
|
|
|
|
- This example runs on STM32F302R8 device.
|
|
|
|
- This example has been tested with STMicroelectronics STM32F302R8-Nucleo RevC
|
|
boards and can be easily tailored to any other supported device
|
|
and development board.
|
|
|
|
|
|
@par How to use it ?
|
|
|
|
In order to make the program work, you must do the following :
|
|
- Open your preferred toolchain
|
|
- Rebuild all files and load your image into target memory
|
|
- Run the example
|
|
|
|
|
|
*/
|