/**
@page Binary Description of the binary template
@verbatim
******************************************************************************
* @file USB_Device/DFU_Standalone/Binary/readme.txt
* @author MCD Application Team
* @brief Description of the binary template example.
******************************************************************************
* @attention
*
* Copyright (c) 2016 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
@endverbatim
@par Example Description
This directory contains a binary template (in DFU format) to be loaded into Flash memory using Device
Firmware Upgrade application.
This file was converted to the DFU format using the "DFU File Manager Tool" included in the "DfuSe" PC software install.
For more details on how to convert a .bin file to DFU format please refer to the UM0412 user manual
"Getting started with DfuSe USB device firmware upgrade STMicroelectronics extension" available from the
STMicroelectronics microcontroller website www.st.com.
This binary is a simple LED toggling.
The system Timer (Systick) is used for to generate the delay.
The offset address of this binary is 0x08007000 which matches the definition in DFU application
"USBD_DFU_APP_DEFAULT_ADD".
@par Hardware and Software environment
- This example runs on STM32F3xx devices.
- This example has been tested with STM32F3-Discovery board and can be
easily tailored to any other supported device and development board.
*/
e805a235c4