81 lines
3.5 KiB
Plaintext
81 lines
3.5 KiB
Plaintext
/**
|
|
@page FreeRTOS_ThreadCreation FreeRTOS Thread Creation example
|
|
|
|
@verbatim
|
|
******************************************************************************
|
|
* @file FreeRTOS/FreeRTOS_ThreadCreation/readme.txt
|
|
* @author MCD Application Team
|
|
* @brief Description of the FreeRTOS Thread Creation example.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2016 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
@endverbatim
|
|
|
|
@par Application Description
|
|
|
|
How to implement thread creation using CMSIS RTOS API.
|
|
|
|
This example creates two threads with the same priority, which execute in
|
|
a periodic cycle of 15 seconds.
|
|
|
|
In the first 5 seconds, the thread 1 toggles LED1 each 200 ms and the
|
|
thread 2 toggles LED2 each 500 ms.
|
|
In the following 5 seconds, the thread 1 suspends itself and the thread 2
|
|
continue toggling LED2.
|
|
In the last 5 seconds, the thread 2 resumes execution of thread 1 then
|
|
suspends itself, the thread 1 toggles the LED1 each 500 ms.
|
|
|
|
@note Care must be taken when using HAL_Delay(), this function provides accurate
|
|
delay (in milliseconds) based on variable incremented in HAL time base ISR.
|
|
This implies that if HAL_Delay() is called from a peripheral ISR process, then
|
|
the HAL time base interrupt must have higher priority (numerically lower) than
|
|
the peripheral interrupt. Otherwise the caller ISR process will be blocked.
|
|
To change the HAL time base interrupt priority you have to use HAL_NVIC_SetPriority()
|
|
function.
|
|
|
|
@note The application needs to ensure that the HAL time base is always set to 1 millisecond
|
|
to have correct HAL operation.
|
|
|
|
@note The FreeRTOS heap size configTOTAL_HEAP_SIZE defined in FreeRTOSConfig.h is set accordingly to the
|
|
OS resources memory requirements of the application with +10% margin and rounded to the upper Kbyte boundary.
|
|
|
|
For more details about FreeRTOS implementation on STM32Cube, please refer to UM1722 "Developing Applications
|
|
on STM32Cube with RTOS".
|
|
|
|
|
|
@par Directory contents
|
|
- FreeRTOS/FreeRTOS_ThreadCreation/Src/main.c Main program
|
|
- FreeRTOS/FreeRTOS_ThreadCreation/Src/stm32f3xx_hal_timebase_tim.c HAL timebase file
|
|
- FreeRTOS/FreeRTOS_ThreadCreation/Src/stm32f3xx_it.c Interrupt handlers
|
|
- FreeRTOS/FreeRTOS_ThreadCreation/Src/system_stm32f3xx.c STM32F3xx system clock configuration file
|
|
- FreeRTOS/FreeRTOS_ThreadCreation/Inc/main.h Main program header file
|
|
- FreeRTOS/FreeRTOS_ThreadCreation/Inc/stm32f3xx_hal_conf.h HAL Library Configuration file
|
|
- FreeRTOS/FreeRTOS_ThreadCreation/Inc/stm32f3xx_it.h Interrupt handlers header file
|
|
- FreeRTOS/FreeRTOS_ThreadCreation/Inc/FreeRTOSConfig.h FreeRTOS Configuration file
|
|
|
|
@par Hardware and Software environment
|
|
|
|
- This example runs on STM32F373xC devices.
|
|
|
|
- This example has been tested with STM32373C-EVAL RevB board and can be
|
|
easily tailored to any other supported device and development board.
|
|
|
|
|
|
@par How to use it ?
|
|
|
|
In order to make the program work, you must do the following:
|
|
- Open your preferred toolchain
|
|
- Rebuild all files and load your image into target memory
|
|
- Run the example
|
|
|
|
|
|
*/
|