159 lines
5.0 KiB
C
159 lines
5.0 KiB
C
/**
|
|
******************************************************************************
|
|
* @file GPIO/GPIO_IOToggle/Src/main.c
|
|
* @author MCD Application Team
|
|
* @brief This example describes how to configure and use GPIOs through
|
|
* the STM32F0xx HAL API.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2016 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "main.h"
|
|
|
|
/** @addtogroup STM32F0xx_HAL_Examples
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup GPIO_IOToggle
|
|
* @{
|
|
*/
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
static GPIO_InitTypeDef GPIO_InitStruct;
|
|
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
static void SystemClock_Config(void);
|
|
|
|
|
|
/* Private functions ---------------------------------------------------------*/
|
|
|
|
/**
|
|
* @brief Main program
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
int main(void)
|
|
{
|
|
/* This sample code shows how to use GPIO HAL API to toggle LED3 IO
|
|
in an infinite loop. */
|
|
|
|
/* STM32F0xx HAL library initialization:
|
|
- Configure the Flash prefetch
|
|
- Systick timer is configured by default as source of time base, but user
|
|
can eventually implement his proper time base source (a general purpose
|
|
timer for example or other time source), keeping in mind that Time base
|
|
duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
|
|
handled in milliseconds basis.
|
|
- Low Level Initialization
|
|
*/
|
|
HAL_Init();
|
|
|
|
/* Configure the system clock to 48 MHz */
|
|
SystemClock_Config();
|
|
|
|
/* -1- Enable GPIO Clock (to be able to program the configuration registers) */
|
|
LED3_GPIO_CLK_ENABLE();
|
|
|
|
/* -2- Configure IO in output push-pull mode to drive external LEDs */
|
|
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
|
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
|
|
|
GPIO_InitStruct.Pin = LED3_PIN;
|
|
HAL_GPIO_Init(LED3_GPIO_PORT, &GPIO_InitStruct);
|
|
|
|
/* -3- Toggle IO in an infinite loop */
|
|
while (1)
|
|
{
|
|
HAL_GPIO_TogglePin(LED3_GPIO_PORT, LED3_PIN);
|
|
/* Insert delay 100 ms */
|
|
HAL_Delay(100);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief System Clock Configuration
|
|
* The system Clock is configured as follow :
|
|
* System Clock source = PLL (HSI)
|
|
* SYSCLK(Hz) = 48000000
|
|
* HCLK(Hz) = 48000000
|
|
* AHB Prescaler = 1
|
|
* APB1 Prescaler = 1
|
|
* HSI Frequency(Hz) = 8000000
|
|
* PREDIV = 1
|
|
* PLLMUL = 6
|
|
* Flash Latency(WS) = 1
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void SystemClock_Config(void)
|
|
{
|
|
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
|
RCC_OscInitTypeDef RCC_OscInitStruct;
|
|
|
|
/* No HSE Oscillator on Nucleo, Activate PLL with HSI as source */
|
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_NONE;
|
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
|
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
|
|
RCC_OscInitStruct.PLL.PREDIV = RCC_PREDIV_DIV1;
|
|
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6;
|
|
if (HAL_RCC_OscConfig(&RCC_OscInitStruct)!= HAL_OK)
|
|
{
|
|
/* Initialization Error */
|
|
while(1);
|
|
}
|
|
|
|
/* Select PLL as system clock source and configure the HCLK, PCLK1 clocks dividers */
|
|
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1);
|
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
|
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
|
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
|
|
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1)!= HAL_OK)
|
|
{
|
|
/* Initialization Error */
|
|
while(1);
|
|
}
|
|
}
|
|
|
|
#ifdef USE_FULL_ASSERT
|
|
|
|
/**
|
|
* @brief Reports the name of the source file and the source line number
|
|
* where the assert_param error has occurred.
|
|
* @param file: pointer to the source file name
|
|
* @param line: assert_param error line source number
|
|
* @retval None
|
|
*/
|
|
void assert_failed(uint8_t *file, uint32_t line)
|
|
{
|
|
/* User can add his own implementation to report the file name and line number,
|
|
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
|
|
|
/* Infinite loop */
|
|
while (1)
|
|
{
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|