Commit Graph

1023 Commits

Author SHA1 Message Date
Eric Sesterhenn 125e18745f [PATCH] More BUG_ON conversion
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:43:08 -07:00
Jan Beulich 908dcecda1 [PATCH] adjust handle_IRR_event() return type
Correct the return type of handle_IRQ_event() (inconsistency noticed during
Xen development), and remove redundant declarations.  The return type
adjustment required breaking out the definition of irqreturn_t into a
separate header, in order to satisfy current include order dependencies.

Signed-off-by: Jan Beulich <jbeulich@novell.com>

Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ian Molton <spyro@f2s.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Hirokazu Takata <takata.hirokazu@renesas.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:43:08 -07:00
Porpoise 3439dd86e3 [PATCH] When CONFIG_BASE_SMALL=1, cascade() may enter an infinite loop
When CONFIG_BASE_SAMLL=1, cascade() in may enter the infinite loop.
Because of CONFIG_BASE_SMALL=1(TVR_BITS=6 and TVN_BITS=4), the list
base->tv5 may cascade into base->tv5.  So, the kernel enters the infinite
loop in the function cascade().

I created a test module to verify this bug, and a patch to fix it.

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/timer.h>
#if 0
#include <linux/kdb.h>
#else
#define kdb_printf printk
#endif

#define TVN_BITS (CONFIG_BASE_SMALL ? 4 : 6)
#define TVR_BITS (CONFIG_BASE_SMALL ? 6 : 8)
#define TVN_SIZE (1 << TVN_BITS)
#define TVR_SIZE (1 << TVR_BITS)
#define TVN_MASK (TVN_SIZE - 1)
#define TVR_MASK (TVR_SIZE - 1)

#define TV_SIZE(N)  (N*TVN_BITS  + TVR_BITS)

struct timer_list timer0;
struct timer_list dummy_timer1;
struct timer_list dummy_timer2;

void dummy_timer_fun(unsigned long data) {
}
unsigned long j=0;
void check_timer_base(unsigned long data)
{
        kdb_printf("check_timer_base %08x\n",jiffies);
        mod_timer(&timer0,(jiffies & (~0xFFF)) + 0x1FFF);
}

int init_module(void)
{
        init_timer(&timer0);
        timer0.data = (unsigned long)0;
        timer0.function = check_timer_base;
        mod_timer(&timer0,jiffies+1);

        init_timer(&dummy_timer1);
        dummy_timer1.data = (unsigned long)0;
        dummy_timer1.function = dummy_timer_fun;

        init_timer(&dummy_timer2);
        dummy_timer2.data = (unsigned long)0;
        dummy_timer2.function = dummy_timer_fun;

        j=jiffies;
        j&=(~((1<<TV_SIZE(3))-1));
        j+=(1<<TV_SIZE(3));
        j+=(1<<TV_SIZE(4));

        kdb_printf("mod_timer %08x\n",j);

        mod_timer(&dummy_timer1, j );
        mod_timer(&dummy_timer2, j );

        return 0;
}

void cleanup_module()
{
        del_timer_sync(&timer0);
        del_timer_sync(&dummy_timer1);
        del_timer_sync(&dummy_timer2);
}

(Cleanups from Oleg)

[oleg@tv-sign.ru: use list_replace_init()]
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:43:08 -07:00
Oleg Nesterov 626ab0e69d [PATCH] list: use list_replace_init() instead of list_splice_init()
list_splice_init(list, head) does unneeded job if it is known that
list_empty(head) == 1.  We can use list_replace_init() instead.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:43:07 -07:00
Randy Dunlap 862f5f0133 [PATCH] Doc: add audit & acct to DocBook
Fix one audit kernel-doc description (one parameter was missing).
Add audit*.c interfaces to DocBook.
Add BSD accounting interfaces to DocBook.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:43:07 -07:00
Paul E. McKenney d83015b8f6 [PATCH] Make RCU API inaccessible to non-GPL Linux kernel modules
Remove synchronize_kernel() (deprecated 2-APR-2005 in
http://lkml.org/lkml/2005/4/3/11) and makes the RCU API inaccessible to
non-GPL Linux kernel modules (as was announced more than one year ago in
http://lkml.org/lkml/2005/4/3/8).  Tested on x86 and ppc64.

Signed-off-by: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:43:07 -07:00
Jes Sorensen 55f4e8d156 [PATCH] kernel/sys.c doesn't need init.h
kernel/sys.c doesn't have anything in it relying on linux/init.h -
remove the include.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:43:07 -07:00
Andrew Morton 57ae250861 [PATCH] CONFIG_NET=n build fix
Cc: Greg KH <greg@kroah.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:43:06 -07:00
Andreas Mohr 83d4e6e7fb [PATCH] make noirqdebug/irqfixup __read_mostly, add (un)likely()
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:43:05 -07:00
Daniel Walker 89d0cf01c0 [PATCH] invert irq/migration.c brach prediction
If you get to that point in the code it means that desc->move_irq is set,
pending_irq_cpumask[irq] and cpu_online_map should have a value.  Still
pretty good chance anding those two you'll still have a value.  So these
two branch predictors should be inverted.

Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:43:04 -07:00
Ingo Molnar 8e0a43d8fa [PATCH] cond_resched() might_sleep() fix
add the __might_sleep() check back to cond_resched().

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:43:04 -07:00
Prasanna Meda 6e66726047 [PATCH] dup fd error fix
Set errorp in dup_fd, it will be used in sys_unshare also.

Signed-off-by: Prasanna Meda <mlp@google.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:43:04 -07:00
Andrew Morton 0ae26f1b31 [PATCH] mmput() might sleep
exit_aio() and exit_mmap() can sleep.  But it's easy to accidentally call
mmput() from inside locks.

Cc: Dave Peterson <dsp@llnl.gov>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:43:03 -07:00
Jeff Moyer c330dda908 [PATCH] Add a sysfs file to determine if a kexec kernel is loaded
Create two files in /sys/kernel, kexec_loaded and kexec_crash_loaded.  Each
file contains a simple boolean value indicating whether the relevant kernel
has been loaded into memory.  The motivation for this is geared around
support.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:43:02 -07:00
Rafael J. Wysocki 968808b895 [PATCH] swsusp: use less memory during resume
Make swsusp allocate only as much memory as needed to store the image data
and metadata during resume.

Without this patch swsusp additionally allocates many page frames that will
conflict with the "original" locations of the image data and are considered
as "unsafe", treating them as "eaten" pages (ie.  allocated but unusable).

The patch makes swsusp allocate as many pages as it'll need to store the
data read from the image in one shot, creating a list of allocated "safe"
pages, and use the observation that all pages allocated by it are marked
with the PG_nosave and PG_nosave_free flags set.   Namely, when it's about
to load an image page, swsusp can check whether the page frame
corresponding to the "original" location of this page has been allocated
(ie.  if the page frame has the PG_nosave and PG_nosave_free flags set) and
if so, it can load the page directly into this page frame.   Otherwise it
uses an allocated "safe" page from the list to store the data that will be
copied to their "original" location later on.

This allows us to save many page copyings and page allocations during
resume and in the future it may allow us to load images greater than 50% of
the normal zone.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: "Pavel Machek" <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:43:00 -07:00
Adrian Bunk 7bff24e255 [PATCH] kernel/power/snapshot.c: cleanups
- make needlessly global functions static
- make dummy functions static inline

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:59 -07:00
Rafael J. Wysocki a938c356d5 [PATCH] swsusp: take lowmem reserves into account
swsusp allocates memory from the normal zone, so it cannot use lowmem
reserve pages from the lower zones.  Therefore it should not count these
pages as available to it.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:59 -07:00
Shaohua Li ce4ab0012b [PATCH] swsusp: add architecture special saveable pages support
1. Add architecture specific pages save/restore support.  Next two patches
   will use this to save/restore 'ACPI NVS' pages.

2. Allow reserved pages 'nosave'.  This could avoid save/restore BIOS
   reserved pages.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Nigel Cunningham <nigel@suspend2.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:59 -07:00
Zhang Yanmin 1b61b910e9 [PATCH] x86: kernel irq balance doesn't work
On i386, kernel irq balance doesn't work.

1) In function do_irq_balance, after kernel finds the min_loaded cpu but
   before calling set_pending_irq to really pin the selected_irq to the
   target cpu, kernel does a cpus_and with irq_affinity[selected_irq].
   Later on, when the irq is acked, kernel would calls
   move_native_irq=>desc->handler->set_affinity to change the irq affinity.
    However, every function pointed by
   hw_interrupt_type->set_affinity(unsigned int irq, cpumask_t cpumask)
   always changes irq_affinity[irq] to cpumask.  Next time when recalling
   do_irq_balance, it has to do cpu_ands again with
   irq_affinity[selected_irq], but irq_affinity[selected_irq] already
   becomes one cpu selected by the first irq balance.

2) Function balance_irq in file arch/i386/kernel/io_apic.c has the same
   issue.

[akpm@osdl.org: cleanups]
Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:57 -07:00
David Quigley 22fb52dd73 [PATCH] SELinux: add security hook call to mediate attach_task (kernel/cpuset.c)
Add a security hook call to enable security modules to control the ability
to attach a task to a cpuset.  While limited control over this operation is
possible via permission checks on the pseudo fs interface, those checks are
not sufficient to control access to the target task, which is looked up in
this function.  The existing task_setscheduler hook is re-used for this
operation since this falls under the same class of operations.

Signed-off-by: David Quigley <dpquigl@tycho.nsa.gov>
Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
Acked-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:54 -07:00
David Quigley e7834f8fcc [PATCH] SELinux: add security hooks to {get,set}affinity
This patch adds LSM hooks into the setaffinity and getaffinity functions to
enable security modules to control these operations between tasks with
task_setscheduler and task_getscheduler LSM hooks.

Signed-off-by: David Quigley <dpquigl@tycho.nsa.gov>
Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:53 -07:00
Christoph Lameter 9216dfad4f [PATCH] move_pages: fix 32 -> 64 bit compat function
The definition of the third parameter is a pointer to an array of virtual
addresses which give us some trouble.  The existing code calculated the
wrong address in the array since I used void to avoid having to specify a
type.

I now use the correct type "compat_uptr_t __user *" in the definition of
the function in kernel/compat.c.

However, I used __u32 in syscalls.h.  Would have to include compat.h there
in order to provide the same definition which would generate an ugly
include situation.

On both ia64 and x86_64 compat_uptr_t is u32. So this works although
parameter declarations differ.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:53 -07:00
Christoph Lameter 1b2db9fb7a [PATCH] sys_move_pages: 32bit support (i386, x86_64)
sys_move_pages() support for 32bit (i386 plus x86_64 compat layer)

Add support for move_pages() on i386 and also add the compat functions
necessary to run 32 bit binaries on x86_64.

Add compat_sys_move_pages to the x86_64 32bit binary layer.  Note that it is
not up to date so I added the missing pieces.  Not sure if this is done the
right way.

[akpm@osdl.org: compile fix]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:53 -07:00
Christoph Lameter 742755a1d8 [PATCH] page migration: sys_move_pages(): support moving of individual pages
move_pages() is used to move individual pages of a process. The function can
be used to determine the location of pages and to move them onto the desired
node. move_pages() returns status information for each page.

long move_pages(pid, number_of_pages_to_move,
		addresses_of_pages[],
		nodes[] or NULL,
		status[],
		flags);

The addresses of pages is an array of void * pointing to the
pages to be moved.

The nodes array contains the node numbers that the pages should be moved
to. If a NULL is passed instead of an array then no pages are moved but
the status array is updated. The status request may be used to determine
the page state before issuing another move_pages() to move pages.

The status array will contain the state of all individual page migration
attempts when the function terminates. The status array is only valid if
move_pages() completed successfullly.

Possible page states in status[]:

0..MAX_NUMNODES	The page is now on the indicated node.

-ENOENT		Page is not present

-EACCES		Page is mapped by multiple processes and can only
		be moved if MPOL_MF_MOVE_ALL is specified.

-EPERM		The page has been mlocked by a process/driver and
		cannot be moved.

-EBUSY		Page is busy and cannot be moved. Try again later.

-EFAULT		Invalid address (no VMA or zero page).

-ENOMEM		Unable to allocate memory on target node.

-EIO		Unable to write back page. The page must be written
		back in order to move it since the page is dirty and the
		filesystem does not provide a migration function that
		would allow the moving of dirty pages.

-EINVAL		A dirty page cannot be moved. The filesystem does not provide
		a migration function and has no ability to write back pages.

The flags parameter indicates what types of pages to move:

MPOL_MF_MOVE	Move pages that are only mapped by the process.

MPOL_MF_MOVE_ALL Also move pages that are mapped by multiple processes.
		Requires sufficient capabilities.

Possible return codes from move_pages()

-ENOENT		No pages found that would require moving. All pages
		are either already on the target node, not present, had an
		invalid address or could not be moved because they were
		mapped by multiple processes.

-EINVAL		Flags other than MPOL_MF_MOVE(_ALL) specified or an attempt
		to migrate pages in a kernel thread.

-EPERM		MPOL_MF_MOVE_ALL specified without sufficient priviledges.
		or an attempt to move a process belonging to another user.

-EACCES		One of the target nodes is not allowed by the current cpuset.

-ENODEV		One of the target nodes is not online.

-ESRCH		Process does not exist.

-E2BIG		Too many pages to move.

-ENOMEM		Not enough memory to allocate control array.

-EFAULT		Parameters could not be accessed.

A test program for move_pages() may be found with the patches
on ftp.kernel.org:/pub/linux/kernel/people/christoph/pmig/patches-2.6.17-rc4-mm3

From: Christoph Lameter <clameter@sgi.com>

  Detailed results for sys_move_pages()

  Pass a pointer to an integer to get_new_page() that may be used to
  indicate where the completion status of a migration operation should be
  placed.  This allows sys_move_pags() to report back exactly what happened to
  each page.

  Wish there would be a better way to do this. Looks a bit hacky.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Jes Sorensen <jes@trained-monkey.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:53 -07:00
Rafael J. Wysocki d6277db4ab [PATCH] swsusp: rework memory shrinker
Rework the swsusp's memory shrinker in the following way:

- Simplify balance_pgdat() by removing all of the swsusp-related code
  from it.

- Make shrink_all_memory() use shrink_slab() and a new function
  shrink_all_zones() which calls shrink_active_list() and
  shrink_inactive_list() directly for each zone in a way that's optimized
  for suspend.

In shrink_all_memory() we try to free exactly as many pages as the caller
asks for, preferably in one shot, starting from easier targets.   If slab
caches are huge, they are most likely to have enough pages to reclaim.
 The inactive lists are next (the zones with more inactive pages go first)
etc.

Each time shrink_all_memory() attempts to shrink the active and inactive
lists for each zone in 5 passes.   In the first pass, only the inactive
lists are taken into consideration.   In the next two passes the active
lists are also shrunk, but mapped pages are not reclaimed.   In the last
two passes the active and inactive lists are shrunk and mapped pages are
reclaimed as well.  The aim of this is to alter the reclaim logic to choose
the best pages to keep on resume and improve the responsiveness of the
resumed system.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Con Kolivas <kernel@kolivas.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:48 -07:00
KAMEZAWA Hiroyuki fadd8fbd15 [PATCH] support for panic at OOM
This patch adds panic_on_oom sysctl under sys.vm.

When sysctl vm.panic_on_oom = 1, the kernel panics intead of killing rogue
processes.  And if vm.panic_on_oom is 0 the kernel will do oom_kill() in
the same way as it does today.  Of course, the default value is 0 and only
root can modifies it.

In general, oom_killer works well and kill rogue processes.  So the whole
system can survive.  But there are environments where panic is preferable
rather than kill some processes.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:47 -07:00
David Howells 726c334223 [PATCH] VFS: Permit filesystem to perform statfs with a known root dentry
Give the statfs superblock operation a dentry pointer rather than a superblock
pointer.

This complements the get_sb() patch.  That reduced the significance of
sb->s_root, allowing NFS to place a fake root there.  However, NFS does
require a dentry to use as a target for the statfs operation.  This permits
the root in the vfsmount to be used instead.

linux/mount.h has been added where necessary to make allyesconfig build
successfully.

Interest has also been expressed for use with the FUSE and XFS filesystems.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Nathan Scott <nathans@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:45 -07:00
David Howells 454e2398be [PATCH] VFS: Permit filesystem to override root dentry on mount
Extend the get_sb() filesystem operation to take an extra argument that
permits the VFS to pass in the target vfsmount that defines the mountpoint.

The filesystem is then required to manually set the superblock and root dentry
pointers.  For most filesystems, this should be done with simple_set_mnt()
which will set the superblock pointer and then set the root dentry to the
superblock's s_root (as per the old default behaviour).

The get_sb() op now returns an integer as there's now no need to return the
superblock pointer.

This patch permits a superblock to be implicitly shared amongst several mount
points, such as can be done with NFS to avoid potential inode aliasing.  In
such a case, simple_set_mnt() would not be called, and instead the mnt_root
and mnt_sb would be set directly.

The patch also makes the following changes:

 (*) the get_sb_*() convenience functions in the core kernel now take a vfsmount
     pointer argument and return an integer, so most filesystems have to change
     very little.

 (*) If one of the convenience function is not used, then get_sb() should
     normally call simple_set_mnt() to instantiate the vfsmount. This will
     always return 0, and so can be tail-called from get_sb().

 (*) generic_shutdown_super() now calls shrink_dcache_sb() to clean up the
     dcache upon superblock destruction rather than shrink_dcache_anon().

     This is required because the superblock may now have multiple trees that
     aren't actually bound to s_root, but that still need to be cleaned up. The
     currently called functions assume that the whole tree is rooted at s_root,
     and that anonymous dentries are not the roots of trees which results in
     dentries being left unculled.

     However, with the way NFS superblock sharing are currently set to be
     implemented, these assumptions are violated: the root of the filesystem is
     simply a dummy dentry and inode (the real inode for '/' may well be
     inaccessible), and all the vfsmounts are rooted on anonymous[*] dentries
     with child trees.

     [*] Anonymous until discovered from another tree.

 (*) The documentation has been adjusted, including the additional bit of
     changing ext2_* into foo_* in the documentation.

[akpm@osdl.org: convert ipath_fs, do other stuff]
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Nathan Scott <nathans@sgi.com>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:45 -07:00
Linus Torvalds 45c091bb2d Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (139 commits)
  [POWERPC] re-enable OProfile for iSeries, using timer interrupt
  [POWERPC] support ibm,extended-*-frequency properties
  [POWERPC] Extra sanity check in EEH code
  [POWERPC] Dont look for class-code in pci children
  [POWERPC] Fix mdelay badness on shared processor partitions
  [POWERPC] disable floating point exceptions for init
  [POWERPC] Unify ppc syscall tables
  [POWERPC] mpic: add support for serial mode interrupts
  [POWERPC] pseries: Print PCI slot location code on failure
  [POWERPC] spufs: one more fix for 64k pages
  [POWERPC] spufs: fail spu_create with invalid flags
  [POWERPC] spufs: clear class2 interrupt status before wakeup
  [POWERPC] spufs: fix Makefile for "make clean"
  [POWERPC] spufs: remove stop_code from struct spu
  [POWERPC] spufs: fix spu irq affinity setting
  [POWERPC] spufs: further abstract priv1 register access
  [POWERPC] spufs: split the Cell BE support into generic and platform dependant parts
  [POWERPC] spufs: dont try to access SPE channel 1 count
  [POWERPC] spufs: use kzalloc in create_spu
  [POWERPC] spufs: fix initial state of wbox file
  ...

Manually resolved conflicts in:
	drivers/net/phy/Makefile
	include/asm-powerpc/spu.h
2006-06-22 22:11:30 -07:00
Ravikiran G Thirumalai de047c1bcd [PATCH] avoid tasklist_lock at getrusage for multithreaded case too
Avoid taking tasklist_lock for at getrusage for the multithreaded case too.
We don't need to take the tasklist lock for thread traversal of a process
since Oleg's do-__unhash_process-under-siglock.patch and related work.

Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-22 15:05:57 -07:00
Andrew Morton 6cc0719181 [PATCH] suspend_console() warning fix
kernel/power/main.c: In function 'suspend_prepare':
kernel/power/main.c:89: warning: implicit declaration of function 'suspend_console'
kernel/power/main.c: In function 'suspend_finish':
kernel/power/main.c:137: warning: implicit declaration of function 'resume_console'

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-22 15:05:56 -07:00
Michael LeMay d720024e94 [PATCH] selinux: add hooks for key subsystem
Introduce SELinux hooks to support the access key retention subsystem
within the kernel.  Incorporate new flask headers from a modified version
of the SELinux reference policy, with support for the new security class
representing retained keys.  Extend the "key_alloc" security hook with a
task parameter representing the intended ownership context for the key
being allocated.  Attach security information to root's default keyrings
within the SELinux initialization routine.

Has passed David's testsuite.

Signed-off-by: Michael LeMay <mdlemay@epoch.ncsc.mil>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-22 15:05:55 -07:00
Linus Torvalds d9eaec9e29 Merge branch 'audit.b21' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current
* 'audit.b21' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: (25 commits)
  [PATCH] make set_loginuid obey audit_enabled
  [PATCH] log more info for directory entry change events
  [PATCH] fix AUDIT_FILTER_PREPEND handling
  [PATCH] validate rule fields' types
  [PATCH] audit: path-based rules
  [PATCH] Audit of POSIX Message Queue Syscalls v.2
  [PATCH] fix se_sen audit filter
  [PATCH] deprecate AUDIT_POSSBILE
  [PATCH] inline more audit helpers
  [PATCH] proc_loginuid_write() uses simple_strtoul() on non-terminated array
  [PATCH] update of IPC audit record cleanup
  [PATCH] minor audit updates
  [PATCH] fix audit_krule_to_{rule,data} return values
  [PATCH] add filtering by ppid
  [PATCH] log ppid
  [PATCH] collect sid of those who send signals to auditd
  [PATCH] execve argument logging
  [PATCH] fix deadlocks in AUDIT_LIST/AUDIT_LIST_RULES
  [PATCH] audit_panic() is audit-internal
  [PATCH] inotify (5/5): update kernel documentation
  ...

Manual fixup of conflict in unclude/linux/inotify.h
2006-06-20 15:37:56 -07:00
Linus Torvalds 2edc322d42 Merge git://git.infradead.org/~dwmw2/rbtree-2.6
* git://git.infradead.org/~dwmw2/rbtree-2.6:
  [RBTREE] Switch rb_colour() et al to en_US spelling of 'color' for consistency
  Update UML kernel/physmem.c to use rb_parent() accessor macro
  [RBTREE] Update hrtimers to use rb_parent() accessor macro.
  [RBTREE] Add explicit alignment to sizeof(long) for struct rb_node.
  [RBTREE] Merge colour and parent fields of struct rb_node.
  [RBTREE] Remove dead code in rb_erase()
  [RBTREE] Update JFFS2 to use rb_parent() accessor macro.
  [RBTREE] Update eventpoll.c to use rb_parent() accessor macro.
  [RBTREE] Update key.c to use rb_parent() accessor macro.
  [RBTREE] Update ext3 to use rb_parent() accessor macro.
  [RBTREE] Change rbtree off-tree marking in I/O schedulers.
  [RBTREE] Add accessor macros for colour and parent fields of rb_node
2006-06-20 14:51:22 -07:00
Linus Torvalds be967b7e2f Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (199 commits)
  [MTD] NAND: Fix breakage all over the place
  [PATCH] NAND: fix remaining OOB length calculation
  [MTD] NAND Fixup NDFC merge brokeness
  [MTD NAND] S3C2410 driver cleanup
  [MTD NAND] s3c24x0 board: Fix clock handling, ensure proper initialisation.
  [JFFS2] Check CRC32 on dirent and data nodes each time they're read
  [JFFS2] When retiring nextblock, allocate a node_ref for the wasted space
  [JFFS2] Mark XATTR support as experimental, for now
  [JFFS2] Don't trust node headers before the CRC is checked.
  [MTD] Restore MTD_ROM and MTD_RAM types
  [MTD] assume mtd->writesize is 1 for NOR flashes
  [MTD NAND] Fix s3c2410 NAND driver so it at least _looks_ like it compiles
  [MTD] Prepare physmap for 64-bit-resources
  [JFFS2] Fix more breakage caused by janitorial meddling.
  [JFFS2] Remove stray __exit from jffs2_compressors_exit()
  [MTD] Allow alternate JFFS2 mount variant for root filesystem.
  [MTD] Disconnect struct mtd_info from ABI
  [MTD] replace MTD_RAM with MTD_GENERIC_TYPE
  [MTD] replace MTD_ROM with MTD_GENERIC_TYPE
  [MTD] remove a forgotten MTD_XIP
  ...
2006-06-20 14:50:31 -07:00
Steve Grubb 41757106b9 [PATCH] make set_loginuid obey audit_enabled
Hi,

I was doing some testing and noticed that when the audit system was disabled,
I was still getting messages about the loginuid being set. The following patch
makes audit_set_loginuid look at in_syscall to determine if it should create
an audit event. The loginuid will continue to be set as long as there is a context.

Signed-off-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-06-20 05:25:29 -04:00
Amy Griffis 9c937dcc71 [PATCH] log more info for directory entry change events
When an audit event involves changes to a directory entry, include
a PATH record for the directory itself.  A few other notable changes:

    - fixed audit_inode_child() hooks in fsnotify_move()
    - removed unused flags arg from audit_inode()
    - added audit log routines for logging a portion of a string

Here's some sample output.

before patch:
type=SYSCALL msg=audit(1149821605.320:26): arch=40000003 syscall=39 success=yes exit=0 a0=bf8d3c7c a1=1ff a2=804e1b8 a3=bf8d3c7c items=1 ppid=739 pid=800 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=ttyS0 comm="mkdir" exe="/bin/mkdir" subj=root:system_r:unconfined_t:s0-s0:c0.c255
type=CWD msg=audit(1149821605.320:26):  cwd="/root"
type=PATH msg=audit(1149821605.320:26): item=0 name="foo" parent=164068 inode=164010 dev=03:00 mode=040755 ouid=0 ogid=0 rdev=00:00 obj=root:object_r:user_home_t:s0

after patch:
type=SYSCALL msg=audit(1149822032.332:24): arch=40000003 syscall=39 success=yes exit=0 a0=bfdd9c7c a1=1ff a2=804e1b8 a3=bfdd9c7c items=2 ppid=714 pid=777 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=ttyS0 comm="mkdir" exe="/bin/mkdir" subj=root:system_r:unconfined_t:s0-s0:c0.c255
type=CWD msg=audit(1149822032.332:24):  cwd="/root"
type=PATH msg=audit(1149822032.332:24): item=0 name="/root" inode=164068 dev=03:00 mode=040750 ouid=0 ogid=0 rdev=00:00 obj=root:object_r:user_home_dir_t:s0
type=PATH msg=audit(1149822032.332:24): item=1 name="foo" inode=164010 dev=03:00 mode=040755 ouid=0 ogid=0 rdev=00:00 obj=root:object_r:user_home_t:s0

Signed-off-by: Amy Griffis <amy.griffis@hp.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-06-20 05:25:28 -04:00
Amy Griffis 6a2bceec0e [PATCH] fix AUDIT_FILTER_PREPEND handling
Clear AUDIT_FILTER_PREPEND flag after adding rule to list.  This
fixes three problems when a rule is added with the -A syntax:

    - auditctl displays filter list as "(null)"
    - the rule cannot be removed using -d
    - a duplicate rule can be added with -a

Signed-off-by: Amy Griffis <amy.griffis@hp.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-06-20 05:25:28 -04:00
Al Viro 0a73dccc4f [PATCH] validate rule fields' types
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-06-20 05:25:27 -04:00
Amy Griffis f368c07d72 [PATCH] audit: path-based rules
In this implementation, audit registers inotify watches on the parent
directories of paths specified in audit rules.  When audit's inotify
event handler is called, it updates any affected rules based on the
filesystem event.  If the parent directory is renamed, removed, or its
filesystem is unmounted, audit removes all rules referencing that
inotify watch.

To keep things simple, this implementation limits location-based
auditing to the directory entries in an existing directory.  Given
a path-based rule for /foo/bar/passwd, the following table applies:

    passwd modified -- audit event logged
    passwd replaced -- audit event logged, rules list updated
    bar renamed     -- rule removed
    foo renamed     -- untracked, meaning that the rule now applies to
		       the new location

Audit users typically want to have many rules referencing filesystem
objects, which can significantly impact filtering performance.  This
patch also adds an inode-number-based rule hash to mitigate this
situation.

The patch is relative to the audit git tree:
http://kernel.org/git/?p=linux/kernel/git/viro/audit-current.git;a=summary
and uses the inotify kernel API:
http://lkml.org/lkml/2006/6/1/145

Signed-off-by: Amy Griffis <amy.griffis@hp.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-06-20 05:25:27 -04:00
George C. Wilson 20ca73bc79 [PATCH] Audit of POSIX Message Queue Syscalls v.2
This patch adds audit support to POSIX message queues.  It applies cleanly to
the lspp.b15 branch of Al Viro's git tree.  There are new auxiliary data
structures, and collection and emission routines in kernel/auditsc.c.  New hooks
in ipc/mqueue.c collect arguments from the syscalls.

I tested the patch by building the examples from the POSIX MQ library tarball.
Build them -lrt, not against the old MQ library in the tarball.  Here's the URL:
http://www.geocities.com/wronski12/posix_ipc/libmqueue-4.41.tar.gz
Do auditctl -a exit,always -S for mq_open, mq_timedsend, mq_timedreceive,
mq_notify, mq_getsetattr.  mq_unlink has no new hooks.  Please see the
corresponding userspace patch to get correct output from auditd for the new
record types.

[fixes folded]

Signed-off-by: George Wilson <ltcgcw@us.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-06-20 05:25:26 -04:00
Al Viro 014149cce1 [PATCH] deprecate AUDIT_POSSBILE
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-06-20 05:25:25 -04:00
Al Viro d8945bb51a [PATCH] inline more audit helpers
pull checks for ->audit_context into inlined wrappers

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-06-20 05:25:25 -04:00
Linda Knippers ac03221a4f [PATCH] update of IPC audit record cleanup
The following patch addresses most of the issues with the IPC_SET_PERM
records as described in:
https://www.redhat.com/archives/linux-audit/2006-May/msg00010.html
and addresses the comments I received on the record field names.

To summarize, I made the following changes:

1. Changed sys_msgctl() and semctl_down() so that an IPC_SET_PERM
   record is emitted in the failure case as well as the success case.
   This matches the behavior in sys_shmctl().  I could simplify the
   code in sys_msgctl() and semctl_down() slightly but it would mean
   that in some error cases we could get an IPC_SET_PERM record
   without an IPC record and that seemed odd.

2. No change to the IPC record type, given no feedback on the backward
   compatibility question.

3. Removed the qbytes field from the IPC record.  It wasn't being
   set and when audit_ipc_obj() is called from ipcperms(), the
   information isn't available.  If we want the information in the IPC
   record, more extensive changes will be necessary.  Since it only
   applies to message queues and it isn't really permission related, it
   doesn't seem worth it.

4. Removed the obj field from the IPC_SET_PERM record.  This means that
   the kern_ipc_perm argument is no longer needed.

5. Removed the spaces and renamed the IPC_SET_PERM field names.  Replaced iuid and
   igid fields with ouid and ogid in the IPC record.

I tested this with the lspp.22 kernel on an x86_64 box.  I believe it
applies cleanly on the latest kernel.

-- ljk

Signed-off-by: Linda Knippers <linda.knippers@hp.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-06-20 05:25:24 -04:00
Serge E. Hallyn 5d136a010d [PATCH] minor audit updates
Just a few minor proposed updates.  Only the last one will
actually affect behavior.  The rest are just misleading
code.

Several AUDIT_SET functions return 'old' value, but only
return value <0 is checked for.  So just return 0.

propagate audit_set_rate_limit and audit_set_backlog_limit
error values

In audit_buffer_free, the audit_freelist_count was being
incremented even when we discard the return buffer, so
audit_freelist_count can end up wrong.  This could cause
the actual freelist to shrink over time, eventually
threatening to degrate audit performance.

Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-06-20 05:25:23 -04:00
Amy Griffis 0a3b483e83 [PATCH] fix audit_krule_to_{rule,data} return values
Don't return -ENOMEM when callers of these functions are checking for
a NULL return.  Bug noticed by Serge Hallyn.

Signed-off-by: Amy Griffis <amy.griffis@hp.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-06-20 05:25:23 -04:00
Al Viro 3c66251e57 [PATCH] add filtering by ppid
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-06-20 05:25:22 -04:00
Al Viro f46038ff7d [PATCH] log ppid
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-06-20 05:25:22 -04:00
Al Viro e1396065e0 [PATCH] collect sid of those who send signals to auditd
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-06-20 05:25:21 -04:00
Al Viro 473ae30bc7 [PATCH] execve argument logging
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-06-20 05:25:21 -04:00