Commit Graph

20 Commits

Author SHA1 Message Date
David S. Miller 17f7f4d9fc Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	net/ipv4/fib_frontend.c
2010-12-26 22:37:05 -08:00
Linus Torvalds 9d5004fcf6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: handle partial result from get_user_pages
  ceph: mark user pages dirty on direct-io reads
  ceph: fix null pointer dereference in ceph_init_dentry for nfs reexport
  ceph: fix direct-io on non-page-aligned buffers
  ceph: fix msgr_init error path
2010-12-20 21:32:20 -08:00
Henry C Chang 361cf40519 ceph: handle partial result from get_user_pages
The get_user_pages() helper can return fewer than the requested pages.
Error out in that case, and clean up the partial result.

Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-17 09:55:59 -08:00
Henry C Chang b6aa5901c7 ceph: mark user pages dirty on direct-io reads
For read operation, we have to set the argument _write_ of get_user_pages
to 1 since we will write data to pages. Also, we need to SetPageDirty before
releasing these pages.

Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-17 09:54:40 -08:00
Sage Weil d96c9043d1 ceph: fix msgr_init error path
create_workqueue() returns NULL on failure.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-12-13 20:30:28 -08:00
David S. Miller fe6c791570 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
	net/llc/af_llc.c
2010-12-08 13:47:38 -08:00
Linus Torvalds a01af8e4a4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits)
  af_unix: limit recursion level
  pch_gbe driver: The wrong of initializer entry
  pch_gbe dreiver: chang author
  ucc_geth: fix ucc halt problem in half duplex mode
  inet: Fix __inet_inherit_port() to correctly increment bsockets and num_owners
  ehea: Add some info messages and fix an issue
  hso: fix disable_net
  NET: wan/x25_asy, move lapb_unregister to x25_asy_close_tty
  cxgb4vf: fix setting unicast/multicast addresses ...
  net, ppp: Report correct error code if unit allocation failed
  DECnet: don't leak uninitialized stack byte
  au1000_eth: fix invalid address accessing the MAC enable register
  dccp: fix error in updating the GAR
  tcp: restrict net.ipv4.tcp_adv_win_scale (#20312)
  netns: Don't leak others' openreq-s in proc
  Net: ceph: Makefile: Remove unnessary code
  vhost/net: fix rcu check usage
  econet: fix CVE-2010-3848
  econet: fix CVE-2010-3850
  econet: disallow NULL remote addr for sendmsg(), fixes CVE-2010-3849
  ...
2010-11-29 14:36:33 -08:00
Tracey Dent 4cb6a614ba Net: ceph: Makefile: Remove unnessary code
Remove the if and else conditional because the code is in mainline and there
is no need in it being there.

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-27 17:39:29 -08:00
Linus Torvalds 3cbaa0f7a7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  of/phylib: Use device tree properties to initialize Marvell PHYs.
  phylib: Add support for Marvell 88E1149R devices.
  phylib: Use common page register definition for Marvell PHYs.
  qlge: Fix incorrect usage of module parameters and netdev msg level
  ipv6: fix missing in6_ifa_put in addrconf
  SuperH IrDA: correct Baud rate error correction
  atl1c: Fix hardware type check for enabling OTP CLK
  net: allow GFP_HIGHMEM in __vmalloc()
  bonding: change list contact to netdev@vger.kernel.org
  e1000: fix screaming IRQ
2010-11-24 08:22:34 +09:00
Tracey Dent fa13bc3daa Net: ceph: Makefile: remove deprecated kbuild goal definitions
Changed Makefile to use <modules>-y instead of <modules>-objs
because -objs is deprecated and not mentioned in
Documentation/kbuild/makefiles.txt.

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-22 08:16:10 -08:00
Eric Dumazet 7a1c8e5ab1 net: allow GFP_HIGHMEM in __vmalloc()
We forgot to use __GFP_HIGHMEM in several __vmalloc() calls.

In ceph, add the missing flag.

In fib_trie.c, xfrm_hash.c and request_sock.c, using vzalloc() is
cleaner and allows using HIGHMEM pages as well.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-21 10:04:04 -08:00
Sage Weil c5c6b19d4b ceph: explicitly specify page alignment in network messages
The alignment used for reading data into or out of pages used to be taken
from the data_off field in the message header.  This only worked as long
as the page alignment matched the object offset, breaking direct io to
non-page aligned offsets.

Instead, explicitly specify the page alignment next to the page vector
in the ceph_msg struct, and use that instead of the message header (which
probably shouldn't be trusted).  The alloc_msg callback is responsible for
filling in this field properly when it sets up the page vector.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-09 12:43:17 -08:00
Sage Weil b7495fc2ff ceph: make page alignment explicit in osd interface
We used to infer alignment of IOs within a page based on the file offset,
which assumed they matched.  This broke with direct IO that was not aligned
to pages (e.g., 512-byte aligned IO).  We were also trusting the alignment
specified in the OSD reply, which could have been adjusted by the server.

Explicitly specify the page alignment when setting up OSD IO requests.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-09 12:43:12 -08:00
Sage Weil e98b6fed84 ceph: fix comment, remove extraneous args
The offset/length arguments aren't used.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-09 12:24:53 -08:00
Sage Weil df9f86faf3 ceph: fix small seq message skipping
If the client gets out of sync with the server message sequence number, we
normally skip low seq messages (ones we already received).  The skip code
was also incrementing the expected seq, such that all subsequent messages
also appeared old and got skipped, and an eventual timeout on the osd
connection.  This resulted in some lagging requests and console messages
like

[233480.882885] ceph: skipping osd22 10.138.138.13:6804 seq 2016, expected 2017
[233480.882919] ceph: skipping osd22 10.138.138.13:6804 seq 2017, expected 2018
[233480.882963] ceph: skipping osd22 10.138.138.13:6804 seq 2018, expected 2019
[233480.883488] ceph: skipping osd22 10.138.138.13:6804 seq 2019, expected 2020
[233485.219558] ceph: skipping osd22 10.138.138.13:6804 seq 2020, expected 2021
[233485.906595] ceph: skipping osd22 10.138.138.13:6804 seq 2021, expected 2022
[233490.379536] ceph: skipping osd22 10.138.138.13:6804 seq 2022, expected 2023
[233495.523260] ceph: skipping osd22 10.138.138.13:6804 seq 2023, expected 2024
[233495.923194] ceph: skipping osd22 10.138.138.13:6804 seq 2024, expected 2025
[233500.534614] ceph:  tid 6023602 timed out on osd22, will reset osd

Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-01 15:49:23 -07:00
Sage Weil 240634e9b3 ceph: fix num_pages_free accounting in pagelist
Decrement the free page counter when removing a page from the free_list.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20 15:38:23 -07:00
Yehuda Sadeh 010e3b48fc ceph: don't crash when passed bad mount options
This only happened when parse_extra_token was not passed
to ceph_parse_option() (hence, only happened in rbd).

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2010-10-20 15:38:22 -07:00
Greg Farnum ac0b74d8a1 ceph: add pagelist_reserve, pagelist_truncate, pagelist_set_cursor
These facilitate preallocation of pages so that we can encode into the pagelist
in an atomic context.

Signed-off-by: Greg Farnum <gregf@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20 15:38:16 -07:00
Yehuda Sadeh 602adf4002 rbd: introduce rados block device (rbd), based on libceph
The rados block device (rbd), based on osdblk, creates a block device
that is backed by objects stored in the Ceph distributed object storage
cluster.  Each device consists of a single metadata object and data
striped over many data objects.

The rbd driver supports read-only snapshots.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20 15:38:13 -07:00
Yehuda Sadeh 3d14c5d2b6 ceph: factor out libceph from Ceph file system
This factors out protocol and low-level storage parts of ceph into a
separate libceph module living in net/ceph and include/linux/ceph.  This
is mostly a matter of moving files around.  However, a few key pieces
of the interface change as well:

 - ceph_client becomes ceph_fs_client and ceph_client, where the latter
   captures the mon and osd clients, and the fs_client gets the mds client
   and file system specific pieces.
 - Mount option parsing and debugfs setup is correspondingly broken into
   two pieces.
 - The mon client gets a generic handler callback for otherwise unknown
   messages (mds map, in this case).
 - The basic supported/required feature bits can be expanded (and are by
   ceph_fs_client).

No functional change, aside from some subtle error handling cases that got
cleaned up in the refactoring process.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20 15:37:28 -07:00