270 lines
7.9 KiB
Go
270 lines
7.9 KiB
Go
package i2c
|
|
|
|
import (
|
|
"fmt"
|
|
"time"
|
|
|
|
"gobot.io/x/gobot"
|
|
)
|
|
|
|
const (
|
|
REG_RED = 0x04
|
|
REG_GREEN = 0x03
|
|
REG_BLUE = 0x02
|
|
|
|
LCD_CLEARDISPLAY = 0x01
|
|
LCD_RETURNHOME = 0x02
|
|
LCD_ENTRYMODESET = 0x04
|
|
LCD_DISPLAYCONTROL = 0x08
|
|
LCD_CURSORSHIFT = 0x10
|
|
LCD_FUNCTIONSET = 0x20
|
|
LCD_SETCGRAMADDR = 0x40
|
|
LCD_SETDDRAMADDR = 0x80
|
|
LCD_ENTRYRIGHT = 0x00
|
|
LCD_ENTRYLEFT = 0x02
|
|
LCD_ENTRYSHIFTINCREMENT = 0x01
|
|
LCD_ENTRYSHIFTDECREMENT = 0x00
|
|
LCD_DISPLAYON = 0x04
|
|
LCD_DISPLAYOFF = 0x00
|
|
LCD_CURSORON = 0x02
|
|
LCD_CURSOROFF = 0x00
|
|
LCD_BLINKON = 0x01
|
|
LCD_BLINKOFF = 0x00
|
|
LCD_DISPLAYMOVE = 0x08
|
|
LCD_CURSORMOVE = 0x00
|
|
LCD_MOVERIGHT = 0x04
|
|
LCD_MOVELEFT = 0x00
|
|
LCD_2LINE = 0x08
|
|
LCD_CMD = 0x80
|
|
LCD_DATA = 0x40
|
|
|
|
LCD_2NDLINEOFFSET = 0x40
|
|
)
|
|
|
|
// CustomLCDChars is a map of CGRAM characters that can be loaded
|
|
// into a LCD screen to display custom characters. Some LCD screens such
|
|
// as the Grove screen (jhd1313m1) isn't loaded with latin 1 characters.
|
|
// It's up to the developer to load the set up to 8 custom characters and
|
|
// update the input text so the character is swapped by a byte reflecting
|
|
// the position of the custom character to use.
|
|
// See SetCustomChar
|
|
var CustomLCDChars = map[string][8]byte{
|
|
"é": {130, 132, 142, 145, 159, 144, 142, 128},
|
|
"è": {136, 132, 142, 145, 159, 144, 142, 128},
|
|
"ê": {132, 138, 142, 145, 159, 144, 142, 128},
|
|
"à": {136, 134, 128, 142, 145, 147, 141, 128},
|
|
"â": {132, 138, 128, 142, 145, 147, 141, 128},
|
|
"á": {2, 4, 14, 1, 15, 17, 15, 0},
|
|
"î": {132, 138, 128, 140, 132, 132, 142, 128},
|
|
"í": {2, 4, 12, 4, 4, 4, 14, 0},
|
|
"û": {132, 138, 128, 145, 145, 147, 141, 128},
|
|
"ù": {136, 134, 128, 145, 145, 147, 141, 128},
|
|
"ñ": {14, 0, 22, 25, 17, 17, 17, 0},
|
|
"ó": {2, 4, 14, 17, 17, 17, 14, 0},
|
|
"heart": {0, 10, 31, 31, 31, 14, 4, 0},
|
|
"smiley": {0, 0, 10, 0, 0, 17, 14, 0},
|
|
"frowney": {0, 0, 10, 0, 0, 0, 14, 17},
|
|
}
|
|
|
|
// JHD1313M1Driver is a driver for the Jhd1313m1 LCD display which has two i2c addreses,
|
|
// one belongs to a controller and the other controls solely the backlight.
|
|
// This module was tested with the Seed Grove LCD RGB Backlight v2.0 display which requires 5V to operate.
|
|
// http://www.seeedstudio.com/wiki/Grove_-_LCD_RGB_Backlight
|
|
type JHD1313M1Driver struct {
|
|
name string
|
|
connector Connector
|
|
Config
|
|
lcdAddress int
|
|
lcdConnection Connection
|
|
rgbAddress int
|
|
rgbConnection Connection
|
|
}
|
|
|
|
// NewJHD1313M1Driver creates a new driver with specified i2c interface.
|
|
// Params:
|
|
// conn Connector - the Adaptor to use with this Driver
|
|
//
|
|
// Optional params:
|
|
// i2c.WithBus(int): bus to use with this driver
|
|
//
|
|
func NewJHD1313M1Driver(a Connector, options ...func(Config)) *JHD1313M1Driver {
|
|
j := &JHD1313M1Driver{
|
|
name: gobot.DefaultName("JHD1313M1"),
|
|
connector: a,
|
|
Config: NewConfig(),
|
|
lcdAddress: 0x3E,
|
|
rgbAddress: 0x62,
|
|
}
|
|
|
|
for _, option := range options {
|
|
option(j)
|
|
}
|
|
|
|
return j
|
|
}
|
|
|
|
// Name returns the name the JHD1313M1 Driver was given when created.
|
|
func (h *JHD1313M1Driver) Name() string { return h.name }
|
|
|
|
// SetName sets the name for the JHD1313M1 Driver.
|
|
func (h *JHD1313M1Driver) SetName(n string) { h.name = n }
|
|
|
|
// Connection returns the driver connection to the device.
|
|
func (h *JHD1313M1Driver) Connection() gobot.Connection {
|
|
return h.connector.(gobot.Connection)
|
|
}
|
|
|
|
// Start starts the backlit and the screen and initializes the states.
|
|
func (h *JHD1313M1Driver) Start() (err error) {
|
|
bus := h.GetBusOrDefault(h.connector.GetDefaultBus())
|
|
|
|
if h.lcdConnection, err = h.connector.GetConnection(h.lcdAddress, bus); err != nil {
|
|
return err
|
|
}
|
|
|
|
if h.rgbConnection, err = h.connector.GetConnection(h.rgbAddress, bus); err != nil {
|
|
return err
|
|
}
|
|
|
|
time.Sleep(50000 * time.Microsecond)
|
|
payload := []byte{LCD_CMD, LCD_FUNCTIONSET | LCD_2LINE}
|
|
if _, err := h.lcdConnection.Write(payload); err != nil {
|
|
if _, err := h.lcdConnection.Write(payload); err != nil {
|
|
return err
|
|
}
|
|
}
|
|
|
|
time.Sleep(100 * time.Microsecond)
|
|
if _, err := h.lcdConnection.Write([]byte{LCD_CMD, LCD_DISPLAYCONTROL | LCD_DISPLAYON}); err != nil {
|
|
return err
|
|
}
|
|
|
|
time.Sleep(100 * time.Microsecond)
|
|
if err := h.Clear(); err != nil {
|
|
return err
|
|
}
|
|
|
|
if _, err := h.lcdConnection.Write([]byte{LCD_CMD, LCD_ENTRYMODESET | LCD_ENTRYLEFT | LCD_ENTRYSHIFTDECREMENT}); err != nil {
|
|
return err
|
|
}
|
|
|
|
if err := h.setReg(0, 0); err != nil {
|
|
return err
|
|
}
|
|
if err := h.setReg(1, 0); err != nil {
|
|
return err
|
|
}
|
|
if err := h.setReg(0x08, 0xAA); err != nil {
|
|
return err
|
|
}
|
|
|
|
if err := h.SetRGB(255, 255, 255); err != nil {
|
|
return err
|
|
}
|
|
|
|
return nil
|
|
}
|
|
|
|
// SetRGB sets the Red Green Blue value of backlit.
|
|
func (h *JHD1313M1Driver) SetRGB(r, g, b int) error {
|
|
if err := h.setReg(REG_RED, r); err != nil {
|
|
return err
|
|
}
|
|
if err := h.setReg(REG_GREEN, g); err != nil {
|
|
return err
|
|
}
|
|
return h.setReg(REG_BLUE, b)
|
|
}
|
|
|
|
// Clear clears the text on the lCD display.
|
|
func (h *JHD1313M1Driver) Clear() error {
|
|
err := h.command([]byte{LCD_CLEARDISPLAY})
|
|
return err
|
|
}
|
|
|
|
// Home sets the cursor to the origin position on the display.
|
|
func (h *JHD1313M1Driver) Home() error {
|
|
err := h.command([]byte{LCD_RETURNHOME})
|
|
// This wait fixes a race condition when calling home and clear back to back.
|
|
time.Sleep(2 * time.Millisecond)
|
|
return err
|
|
}
|
|
|
|
// Write displays the passed message on the screen.
|
|
func (h *JHD1313M1Driver) Write(message string) error {
|
|
// This wait fixes an odd bug where the clear function doesn't always work properly.
|
|
time.Sleep(1 * time.Millisecond)
|
|
for _, val := range message {
|
|
if val == '\n' {
|
|
if err := h.SetPosition(16); err != nil {
|
|
return err
|
|
}
|
|
continue
|
|
}
|
|
if _, err := h.lcdConnection.Write([]byte{LCD_DATA, byte(val)}); err != nil {
|
|
return err
|
|
}
|
|
}
|
|
return nil
|
|
}
|
|
|
|
// SetPosition sets the cursor and the data display to pos.
|
|
// 0..15 are the positions in the first display line.
|
|
// 16..32 are the positions in the second display line.
|
|
func (h *JHD1313M1Driver) SetPosition(pos int) (err error) {
|
|
if pos < 0 || pos > 31 {
|
|
err = ErrInvalidPosition
|
|
return
|
|
}
|
|
offset := byte(pos)
|
|
if pos >= 16 {
|
|
offset -= 16
|
|
offset |= LCD_2NDLINEOFFSET
|
|
}
|
|
err = h.command([]byte{LCD_SETDDRAMADDR | offset})
|
|
return
|
|
}
|
|
|
|
func (h *JHD1313M1Driver) Scroll(leftToRight bool) error {
|
|
if leftToRight {
|
|
_, err := h.lcdConnection.Write([]byte{LCD_CMD, LCD_CURSORSHIFT | LCD_DISPLAYMOVE | LCD_MOVELEFT})
|
|
return err
|
|
}
|
|
|
|
_, err := h.lcdConnection.Write([]byte{LCD_CMD, LCD_CURSORSHIFT | LCD_DISPLAYMOVE | LCD_MOVERIGHT})
|
|
return err
|
|
}
|
|
|
|
// Halt is a noop function.
|
|
func (h *JHD1313M1Driver) Halt() error { return nil }
|
|
|
|
// SetCustomChar sets one of the 8 CGRAM locations with a custom character.
|
|
// The custom character can be used by writing a byte of value 0 to 7.
|
|
// When you are using LCD as 5x8 dots in function set then you can define a total of 8 user defined patterns
|
|
// (1 Byte for each row and 8 rows for each pattern).
|
|
// Use http://www.8051projects.net/lcd-interfacing/lcd-custom-character.php to create your own
|
|
// characters.
|
|
// To use a custom character, write byte value of the custom character position as a string after
|
|
// having setup the custom character.
|
|
func (h *JHD1313M1Driver) SetCustomChar(pos int, charMap [8]byte) error {
|
|
if pos > 7 {
|
|
return fmt.Errorf("can't set a custom character at a position greater than 7")
|
|
}
|
|
location := uint8(pos)
|
|
if err := h.command([]byte{LCD_SETCGRAMADDR | (location << 3)}); err != nil {
|
|
return err
|
|
}
|
|
_, err := h.lcdConnection.Write(append([]byte{LCD_DATA}, charMap[:]...))
|
|
return err
|
|
}
|
|
|
|
func (h *JHD1313M1Driver) setReg(command int, data int) error {
|
|
_, err := h.rgbConnection.Write([]byte{byte(command), byte(data)})
|
|
return err
|
|
}
|
|
|
|
func (h *JHD1313M1Driver) command(buf []byte) error {
|
|
_, err := h.lcdConnection.Write(append([]byte{LCD_CMD}, buf...))
|
|
return err
|
|
}
|