1.2.0 --- * **core** * Use new improved default namer to avoid API conflicts * **gpio** * Removed scaling function from servo driver * Correct servo driver to pass along angle to adaptor to sort out implementation * **i2c** * Refactored platforms and drivers to new I2C interfaces * Change to make I2C support more than one bus * Refactor drivers to support new optional params * **bb8** * Added collision detection support and example * **beaglebone** * Correct i2c buses to match actual mapping * **ble** * Switch to using [ble](https://github.com/currantlabs/ble) package for Bluetooth LE * Basic serial over BLE working with Arduino101 with StandardFirmataBLE * WIP on multiple simultaneous ble devices * **chip** * Fixed chip XIO base address lookup * **digispark** * Fix #288 by using pkg-config to locate libusb-compat includes * **firmata** * Remove race conditions identified in Firmata client * Correct error in I2C reads not listening to board events * **mqtt** * Add driver for syntactical sugar around virtual devices * Add SSL/TLS client options support * Fix #277 by adding SetAutoReconnect method to set Paho MQTT client * Change both 'On' and 'Publish' method function signatures to match Eventer interface * **nats** * Add driver to make it easier to create virtual devices * **ollie** * Added collision detection support and example * **parrot** * Add ValidatePitch helper function for Parrot Minidrone, Parrot Bebop & ARDrone 2.0 to package * **docs** * Fix #363 by using atomic.Value to protect current values used by multiple goroutines in drone examples * **test** * Remove Golang 1.5 from TravisCI tests in prep for Golang 1.8 release 1.1.0 --- * **core** * use canonical import path for sysfs package * **i2c** * Add a driver for the SHT3X chip * Add a driver for BMP180 * Add support for L3GD20H gyroscope * **firmata** * Add support for TCPFirmata connections, allowing ESP8266 and other WiFi-connected controllers * Add mention to README to use 'tty.' serial port on OSX * Add mention of A4 and A5 normally unavailable on Firmata * **raspi** * Correct README build instructions with missing 'go build' command * **snapcraft** * Add the packaging metadata to build the gobot snap for Ubuntu Snappy * **particle** * Update examples to take key params via command line * Address #160 by adding support for tinker-servo sketch if installed on Particle device * **esp8266** add experimental ESP8266 support to list of supported platforms * **sysfs** * Should fix #272 by using first byte of data as command register for I2C reads * Some additional cleanup suggested by golint * **ble** * Add generic access service driver * Update docs to include reference to included drivers * Move various test code to test file * **ollie** * Refactoring so no need to expose internal implementation details * **bebop** * Add support/example of RTP video * Enable video on firmware 3.3+ * Update ps3 and video example to enable the video stream * Update README for brief explanation of how to get drone video * Corrected import paths for client examples * **bb8** * Correct NewDriver params and set name * Add missing constructor to wrap Ollie implementation * **minidrone** * Update README with example and which specific models are currently supported * Add all piloting flying state events * Adds Emergency() and TakePicture() commands * **test** * Add Golang 1.8beta2 to Travis builds * Correct aio references for AnalogRead tests 1.0.0 --- * **core** * Refactoring to allow 'Metal' development using Gobot packages * Able to run robots without being part of a Master. * Now running all work in separate goroutines * Rename internal name of Master type * Refactor events to use channels all the way down. * Eliminate potential race conditions from Events and Every functions * Add Unsubscribe() to Eventer, now Once() works as expected * DeleteEvent function added to Eventer interface * Ranges over event channels instead of using select * No longer return non-standard slices of errors, instead use hashicorp/go-multierror * Ensure that all drivers have default names * Now both Robot and Master operate using AutoRun as expected * Use canonical import domain of gobot.io for all code * Use time.Sleep unless waiting for a timeout in a select * Uses time.NewTimer() instead of time.After() to be more efficient * **test** * Add deps tasks to Makefile * Add golang 1.7 to Travis CI tests * Add golang 1.8beta1 to build matrix for Travis * Reduce Travis builds to golang 1.4+ since it is late 2016 already * Complete move of test interfaces into the test files where they belong * Adds Parrot Minidrone and Sphero Ollie to Travis tests * **Add missing godocs for everything** * **i2c** * Move I2C drivers into appropriately named 'drivers/i2c' directory * Add support for Adafruit Servo/PWM HAT * **gpio** * Move GPIO drivers into appropriately named 'drivers/gpio' directory * Add support for PIR motion detector * **beaglebone** * auto-detect Linux kernel version * map usr LEDs to match all kernels * **ble** * Rename drivers to make them more obvious * Add test placeholders * **chip** * Auto-detect OS version to adjust pin mappings * Correct base for new 4.4 GPIO * **edison** * Support for other breakout boards besides Arduino * **firmata** * Use io.ReadFull in platforms/firmata/client * Update tarm/goserial to tarm/serial * **joule** * Add support for Intel Joule * **megapi** * Adding support for MakeBlock megapi * **nats** * Add support for NATS server * **particle** * Complete renaming Spark platform to Particle * **parrot** * Move Parrot Minidrone into own platform * Move both ARDrone and Bebop under Parrot package * **raspi** * Add missing godocs and small refactors for platform * **sphero** * Add initial support for Sphero BB-8 platform * Move Sphero Ollie into own platform 0.12.0 --- * **Refactor Gobot test helpers into separate package** * **Improve Gobot.Every method to return channel, allowing it to be halted** * **Refactor of sysfs adds substantial speed improvements** * **ble** * Experimental support for Bluetooth LE. * Initial support for Battery & Device Information services * Initial support for Sphero BLE robots such as Ollie * Initial support for Parrot Minidrone * **audio** * Add new platform for Audio playback * **gpio** * Support added for new GPIO device: * RGB LED * Bugfixes: * Correct analog to better handle quick changes * Correct handling of errors and buffering for Wiichuk * **mqtt** * Add support for MQTT authentication * **opencv** * Switching to use main fork of OpenCV * Some minor bugfixes related to face tracking 0.11.0 --- * **Support for Golang 1.6** * **Determine I2C adaptor capabilities dynamically to avoid use of block I/O when unavailable** * **chip** * Add support for GPIO & I2C interfaces on C.H.I.P. $9 computer * **leap motion** * Add support additional "hand" and "gesture" events * **mqtt** * Support latest update to Eclipse Paho MQTT client library * **raspberry pi** * Proper release of Pi Blaster for PWM pins * **bebop** * Prevent event race conditions on takeoff/landing * **i2c** * Support added for new i2c device: * MCP23017 Port Expander * Bugfixes: * Correct init and data parsing for MPU-6050 * Correct handling of errors and buffering for Wiichuk 0.10.0 --- * **Refactor core to cleanup robot initialization and shutdown** * **Remove unnecessary goroutines spawned by NewEvent** * **api** * Update Robeaux to v0.5.0 * **bebop** * Add support for the Parrot Bebop drone * **keyboard** * Add support for keyboard control * **gpio** * Support added for 10 new Grove GPIO devices: * Grove Touch Sensor * Grove Sound Sensor * Grove Button * Grove Buzzer * Grove Led * Grove Light Sensor * Grove Vibration Sensor * Grove Rotary * Grove Relay * Grove Temperature Sensor * **i2c** * Support added for 2 new Grove i2c devices: * Grove Accelerometer * Grove LCD with RGB backlit display * **docs** * Many useful fixes and updates for docs, mostly contributed by our wonderful community. 0.8.2 --- - firmata - Refactor firmata adaptor and split firmata protocol implementation into sub `client` package - gpio - Add support for LIDAR-Lite - raspi - Add PWM support via pi-blaster - sphero - Add `ConfigureLocator`, `ReadLocator` and `SetRotationRate` 0.8.1 --- - spark - Add support for spark Events, Functions and Variables - sphero - Add `SetDataStreaming` and `ConfigureCollisionDetection` methods 0.8 --- - Refactor core, gpio, and i2c interfaces - Correctly pass errors throughout packages and remove all panics - Numerous bug fixes and performance improvements - api - Update robeaux to v0.3.0 - firmata - Add optional io.ReadWriteCloser parameter to FirmataAdaptor - Fix `thread exhaustion` error - cli - generator - Update generator for new adaptor and driver interfaces - Add driver, adaptor and project generators - Add optional package name parameter 0.7.1 --- - opencv - Fix pthread_create issue on Mac OS 0.7 --- - Dramatically increased test coverage and documentation - api - Conform to the [cppp.io](https://gobot.io/x/cppp-io) spec - Add support for basic middleware - Add support for custom routes - Add SSE support - ardrone - Add optional parameter to specify the drones network address - core - Add `Once(e *Event, f func(s interface{})` Event function - Rename `Expect` to `Assert` and add `Refute` test helper function - i2c - Add support for MPL115A2 - Add support for MPU6050 - mavlink - Add support for `common` mavlink messages - mqtt - Add support for mqtt - raspi - Add support for the Raspberry Pi - sphero - Enable stop on sphero disconnect - Add `Collision` data struct - sysfs - Add generic linux filesystem gpio implementation 0.6.3 --- - Add support for the Intel Edison 0.6.2 --- - cli - Fix typo in generator - leap - Fix incorrect Port reference - Fix incorrect Event name - neurosky - Fix incorrect Event names - sphero - Correctly format output of GetRGB 0.6.1 --- - cli - Fix template error in generator 0.6 --- - api - Add robeaux support - core - Refactor `Connection` and `Device` - Connections are now a collection of Adaptors - Devices are now a collection of Drivers - Add `Event(string)` function instead of `Events[string]` for retrieving Driver event - Add `AddEvent(string)` function to register an event on a Driver - firmata - Fix slice bounds out of range error - sphero - Fix issue where the driver would not halt correctly on OSX 0.5.2 --- - beaglebone - Add `DirectPinDriver` - Ensure slots are properly loaded 0.5.1 --- - core - Add `Version()` function for Gobot version retrieval - firmata - Fix issue with reading analog inputs - Add `data` event for `AnalogSensorDriver` 0.5 --- - Idomatic clean up - Removed reflections throughout packages - All officially supported platforms are now in ./platforms - API is now a new package ./api - All platforms examples are in ./examples - Replaced martini with net/http - Replaced ginkgo/gomega with system testing package - Refactor gobot/robot/device commands - Added Event type - Replaced Master type with Gobot type - Every` and `After` now accept `time.Duration` - Removed reflection helper methods