2ebbc97e49
Fixed incorrect error condition check when reading the 'ctrl_hum' register.
...
Expanded the BME280 unit test for TestBME280DriverStart() to support reading
from the 'ctrl_hum' register.
Signed-off-by: Graeme Cross <graeme@ceriumdesigns.com>
2017-06-15 14:04:08 +02:00
95b0fe880f
Improved BME280 humidity initialisation so that it does not override existing
...
oversampling rates that have been set up for the ctrl_meas register.
The humidity oversampling rate is set to 1 (as per Section 3.5 of the BME280
data sheet).
Signed-off-by: Graeme Cross <graeme@ceriumdesigns.com>
2017-06-15 14:04:08 +02:00
18cfa16cc7
Issue #424 : Enables humidity readings in the BME280 driver by enforcing the write to the 'ctrl_meas' register, as per Section 5.4.3 of the BME280 data sheet
...
Signed-off-by: Graeme Cross <graeme@ceriumdesigns.com>
2017-06-15 14:04:08 +02:00
d6781a478a
i2c: remove unused test code
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-06-15 14:04:08 +02:00
5f2bb180ee
write config register in little endian
2017-06-15 14:04:08 +02:00
9d59a7c815
i2c: ensure lock of i2c bus for each individual operation
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-05-07 22:28:07 +02:00
1bce89ab32
gofmt, goimports
2017-05-05 20:57:10 -04:00
66f1ed09ff
use real sensor data in tests
2017-05-05 20:55:10 -04:00
b8572849a9
i2c: increase test coverage for INA3221Driver
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-05-05 09:45:21 +02:00
b71aed4d54
i2c: add INA3221 Voltage Monitor to README under supported i2c devices
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-05-05 09:27:08 +02:00
2697b2b42b
gofmt
2017-05-04 23:45:17 -04:00
698d1685f0
cleanup driver and sample, additional documentation
2017-05-04 22:51:58 -04:00
c917806479
Merge branch 'dev' of https://github.com/hybridgroup/gobot into dev
2017-05-03 18:17:42 -04:00
6b926ef037
INA3221 initial port to gobot
2017-05-03 18:07:33 -04:00
26b97e2217
gpio: avoid race condition on starting test
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-05-03 12:04:37 +02:00
1cf59fd2c0
aio: avoid race condition on starting test
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-05-03 10:53:40 +02:00
c9ec619219
aio: ensure that AnalogSensor event Data is always int
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-04-30 09:59:00 +02:00
e3ca19eaa3
gpio: avoid possible race condition in button test
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-04-27 17:19:32 +02:00
3aa0cf5b89
i2c: small refactoring and increase test coverage for bmp180
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-04-27 17:07:44 +02:00
acfdcc1f3a
i2c: increase ads1x15 test coverage
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-04-27 16:34:00 +02:00
86e15b4b71
i2c: add ads1115 to list of supported devices
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-04-27 16:13:29 +02:00
03f178e3a6
Fixed issue with Go 1.7
2017-04-27 09:23:41 -04:00
7eabd4e2e4
Fixed a bug with the ADS1015 reading. Updated example.
2017-04-27 09:10:03 -04:00
95c71a2efc
Added method to determine the gain easily
2017-04-27 09:01:43 -04:00
a950f60c78
Removed duplicate files
2017-04-27 09:01:43 -04:00
9ba655f87d
Merged both 1015 drivers into one!
2017-04-27 09:01:43 -04:00
9728cef5ed
Added comments
2017-04-27 09:01:43 -04:00
c09f8066d8
Added support for the ADS1015 and ADS1115 ADCs
2017-04-27 09:01:43 -04:00
02692c89dd
Added comments
2017-04-27 08:59:17 -04:00
1e266a33a9
Added support for the ADS1015 and ADS1115 ADCs
2017-04-27 08:59:17 -04:00
ce7b34d031
aio: correct order for test to avoid race
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-04-24 18:25:47 +02:00
823d478a51
i2c: correct reads to use simple file reads for ads1015 adc, and increase test coverage
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-04-24 18:15:49 +02:00
29420987ac
i2c: add ads1015 adc to README
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-04-24 17:58:30 +02:00
0de58756bb
i2c: support working for ads1015 adc providing AnalogReader interface
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-04-24 17:56:13 +02:00
3f89f7842c
i2c: initial WIP on support for ADS1015
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-04-24 09:59:43 +02:00
84dfbc9f89
gpio: adjust test timeouts
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-04-21 11:13:56 +02:00
d27ad850f3
aio: adjust test timeouts
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-04-21 11:03:28 +02:00
6f3e81e8be
gpio: only need to support DigitalReader/DigitalWriter interface
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-04-15 18:41:07 +02:00
30df5dc11e
aio: only need to support AnalogReader interface
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-04-15 18:40:41 +02:00
9430e6e751
Merge pull request #406 from vlastv/fix-gpio-motor
...
Fix incorrect change state
2017-04-12 17:40:41 +02:00
6ae2003622
i2c: small refactor and increase test coverage for l3gd20h
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-04-12 17:37:05 +02:00
4b5fb71afb
i2c: increase test coverage for tsl2561
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-04-12 17:23:28 +02:00
8c62d8ce86
Fix test on mode change when speed is set
2017-04-12 18:07:37 +03:00
9f03dff53a
i2c: increase test coverage for tsl2561
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-04-12 16:56:47 +02:00
4714568628
i2c: small refactor and increase test coverage for tsl2561
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-04-12 16:44:15 +02:00
913ea01d3a
i2c: increase test coverage for mpu6050
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-04-12 16:36:27 +02:00
d8a0b9ae60
i2c: copy wiichuck joystick data in test to avoid race conditions
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-04-12 16:11:55 +02:00
1dd9b1abc4
i2c: copy wiichuck joystick data to avoid race conditions
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-04-12 16:00:22 +02:00
dc88e80dca
Fix incorrect change state
2017-04-12 16:32:46 +03:00
000eeaeaf3
i2c: increase test coverage
...
Signed-off-by: deadprogram <ron@hybridgroup.com>
2017-04-12 11:47:42 +02:00
Graeme Cross