hybridgroup.gobot/drivers/spi/README.MD

# SPI

This package provides drivers for [spi](https://en.wikipedia.org/wiki/Serial_Peripheral_Interface_Bus) devices. It currently must be used along with the [raspberry pi](https://gobot.io/documentation/platforms/raspi) adaptor that supports the needed interfaces for spi devices. This uses the experimental [spi package](https://github.com/golang/exp/tree/master/io/spi) which only works on linux systems.

## Getting Started

## Installing
```
go get -d -u gobot.io/x/gobot/...
```

## Hardware Support
Gobot has a extensible system for connecting to hardware devices. 

The following spi Devices are currently supported:

- APA102 Programmable LEDs
- MCP3002 Analog/Digital Converter
- MCP3004 Analog/Digital Converter
- MCP3008 Analog/Digital Converter
- MCP3202 Analog/Digital Converter
- MCP3204 Analog/Digital Converter
- MCP3208 Analog/Digital Converter
- MCP3304 Analog/Digital Converter
- GoPiGo3 Robot

Drivers wanted! :)

The following spi Adaptors are currently supported:

- Raspberry Pi

Adaptors wanted too!
First cut of the GoPiGo3 driver, lacking grove peripherals. 2017-08-25 10:11:11 +08:00			`# SPI`

docs: some helpful edits for the initial spi implementation Signed-off-by: deadprogram <ron@hybridgroup.com> 2017-09-14 20:05:51 +08:00			`This package provides drivers for [spi](https://en.wikipedia.org/wiki/Serial_Peripheral_Interface_Bus) devices. It currently must be used along with the [raspberry pi](https://gobot.io/documentation/platforms/raspi) adaptor that supports the needed interfaces for spi devices. This uses the experimental [spi package](https://github.com/golang/exp/tree/master/io/spi) which only works on linux systems.`
First cut of the GoPiGo3 driver, lacking grove peripherals. 2017-08-25 10:11:11 +08:00
			`## Getting Started`

			`## Installing`
			```
			`go get -d -u gobot.io/x/gobot/...`
			```

			`## Hardware Support`
docs: some helpful edits for the initial spi implementation Signed-off-by: deadprogram <ron@hybridgroup.com> 2017-09-14 20:05:51 +08:00			`Gobot has a extensible system for connecting to hardware devices.`
First cut of the GoPiGo3 driver, lacking grove peripherals. 2017-08-25 10:11:11 +08:00
docs: some helpful edits for the initial spi implementation Signed-off-by: deadprogram <ron@hybridgroup.com> 2017-09-14 20:05:51 +08:00			`The following spi Devices are currently supported:`
First cut of the GoPiGo3 driver, lacking grove peripherals. 2017-08-25 10:11:11 +08:00
spi: correct support for MCP3004/MCP3008 A/D converters Signed-off-by: deadprogram <ron@hybridgroup.com> 2017-12-13 22:40:38 +08:00			`- APA102 Programmable LEDs`
spi: add MCP3002 A/D converter Signed-off-by: deadprogram <ron@hybridgroup.com> 2017-12-13 23:40:44 +08:00			`- MCP3002 Analog/Digital Converter`
spi: correct support for MCP3004/MCP3008 A/D converters Signed-off-by: deadprogram <ron@hybridgroup.com> 2017-12-13 22:40:38 +08:00			`- MCP3004 Analog/Digital Converter`
			`- MCP3008 Analog/Digital Converter`
spi: Add MCP3202, MCP3204, MCP3208, and MCP3304 drivers to README Signed-off-by: deadprogram <ron@hybridgroup.com> 2017-12-14 03:10:22 +08:00			`- MCP3202 Analog/Digital Converter`
			`- MCP3204 Analog/Digital Converter`
			`- MCP3208 Analog/Digital Converter`
			`- MCP3304 Analog/Digital Converter`
docs: some helpful edits for the initial spi implementation Signed-off-by: deadprogram <ron@hybridgroup.com> 2017-09-14 20:05:51 +08:00			`- GoPiGo3 Robot`
First cut of the GoPiGo3 driver, lacking grove peripherals. 2017-08-25 10:11:11 +08:00
docs: some helpful edits for the initial spi implementation Signed-off-by: deadprogram <ron@hybridgroup.com> 2017-09-14 20:05:51 +08:00			`Drivers wanted! :)`
First cut of the GoPiGo3 driver, lacking grove peripherals. 2017-08-25 10:11:11 +08:00
docs: some helpful edits for the initial spi implementation Signed-off-by: deadprogram <ron@hybridgroup.com> 2017-09-14 20:05:51 +08:00			`The following spi Adaptors are currently supported:`

			`- Raspberry Pi`

			`Adaptors wanted too!`