* logging: Implement dial timeout for net writer (fix#4083)
* Limit how often redials are attempted
This should cause dial blocking to occur only once every 10 seconds at most, but it also means the logger connection might be down for up to 10 seconds after it comes back online; oh well. We shouldn't block for DialTimeout at every single log emission.
* Clarify offline behavior
Turns out this was an oversight, we assumed we could use `{http.response.header.*}` but that doesn't work because those are grabbed from the response writer, and we haven't copied any headers into the response writer yet.
So the fix is to set all the response headers into the replacer at a new namespace before running the handlers.
This adds the `{http.reverse_proxy.header.*}` replacer.
See https://caddy.community/t/empty-http-response-header-x-accel-redirect/12447
* caddyfile(formatter): fix nesting not decrementing
This is an extremely weird edge-case where if you had a environment variable {}
on one line, a comment on the next line, and the closing of the block on the
following line; the rest of the Caddyfile would be indented further than it
should've been.
ref; https://github.com/matthewpi/vscode-caddyfile-support/issues/13
* run gofmt
* fmt: better way of handling edge case
Followup to #4150, #4151 /cc @ueffel @polarathene
After a bit of discussion with @mholt, we decided to remove `prefer` as a subdirective and just go with using the order implicitly always. Simpler config, simpler docs, etc.
Effectively changes 7776471 and reverts a small part of f35a7fa.
* caddyhttp: Fix fallback for the error handler chain
The fix I went with in the end (after realizing some mistaken assumptions in #4131) is to just make the routes fall back to errorEmptyHandler instead of the non-error empty handler, if Terminal is true, making the routes error-aware. Ultimately this was probably just an oversight when errors was implemented at some point in the early betas of v2.
See https://caddy.community/t/problem-with-basicauth-handle-errors/12243/9 for context.
* Revert "caddyhttp: Fix fallback for the error handler chain"
This reverts commit 95b6ac44a6.
* caddyhttp: Fix via `routes.go`
* fileserver: Fix `file` matcher with empty `try_files`
Fixes https://github.com/caddyserver/caddy/issues/4146
If `TryFiles` is empty, we fill it with `r.URL.Path`. In this case, this is `/`. Then later, in `prepareFilePath()`, we run the replacer (which turns `{path}` into `/` at that point) but `file` remains the original value (and the placeholder is still the placeholder there).
So then `strings.HasSuffix(file, "/")` will be `false` for the placeholder, but `true` for the empty `TryFiles` codepath, because `file` was `/` due to being set to the actual request value beforehand.
This means that `suffix` becomes `//` in that case, so after `sanitizedPathJoin`, it becomes `./`, so `strictFileExists`'s `strings.HasSuffix(file, separator)` codepath will return true.
I think we should change the `m.TryFiles == nil` codepath to `m.TryFiles = []string{"{http.request.uri.path}"}` for consistency. (And maybe consider hoisting this to `Provision` cause there's no point doing this on every request). I don't think this "optimization" of directly using `r.URL.Path` is so valuable, cause it causes this edgecase with directories.
* Update modules/caddyhttp/fileserver/matcher.go
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* reverseproxy: Add `handle_response` blocks to `reverse_proxy` (#3710)
* reverseproxy: complete handle_response test
* reverseproxy: Change handle_response matchers to use named matchers
reverseproxy: Add support for changing status code
* fastcgi: Remove obsolete TODO
We already have d.Err("transport already specified") in the reverse_proxy parsing code which covers this case
* reverseproxy: Fix support for "4xx" type status codes
* Apply suggestions from code review
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* caddyhttp: Reorganize response matchers
* reverseproxy: Reintroduce caddyfile.Unmarshaler
* reverseproxy: Add comment mentioning Finalize should be called
Co-authored-by: Maxime Soulé <btik-git@scoubidou.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
Below is the report using `benchstat` and cmd:
`go test -run=BenchmarkHeaderREMatcher -bench=BenchmarkHeaderREMatcher -benchmem -count=10`
```
name old time/op new time/op delta
HeaderREMatcher-16 869ns ± 1% 658ns ± 0% -24.29% (p=0.000 n=10+10)
name old alloc/op new alloc/op delta
HeaderREMatcher-16 144B ± 0% 112B ± 0% -22.22% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
HeaderREMatcher-16 7.00 ± 0% 5.00 ± 0% -28.57% (p=0.000 n=10+10)
```
* caddyhttp: reverseproxy: fix hash selection policy
Fixes: #4135
Test: go test './...' -count=1
* caddyhttp: reverseproxy: add test to catch #4135
If you revert the last commit, the test will fail.
An idea that came up in https://caddy.community/t/save-internally-issued-wildcard-certificate-in-consul/11740, this a simple module that might be useful for anyone who uses storage modules that aren't filesystem, to let them load certs/keys externally issued for use by Caddy.
Bit goofy, since we need to fetch the certmagic.Storage during provisioning, it needs a wrapping struct instead of just being an array like `load_files`.
Future work might involve adding Caddyfile support via a subdirective of the `tls` directive maybe?
After reading a question about the `handle_response` feature of `reverse_proxy`, I realized that we didn't have a way of serving an arbitrary file with a status code other than 200. This is an issue in situations where you want to serve a custom error page in routes that are not errors, like the aforementioned `handle_response`, where you may want to retain the status code returned by the proxy but write a response with content from a file.
This feature is super simple, basically if a status code is configured (can be a status code number, or a placeholder string) then that status will be written out before serving the file - if we write the status code first, then the stdlib won't write its own (only the first HTTP status header wins).
* encode: implement prefer setting
* encode: minimum_length configurable via caddyfile
* encode: configurable content-types which to encode
* file_server: support precompressed files
* encode: use ReponseMatcher for conditional encoding of content
* linting error & documentation of encode.PrecompressedOrder
* encode: allow just one response matcher
also change the namespace of the encoders back, I accidently changed to precompressed >.>
default matchers include a * to match to any charset, that may be appended
* rounding of the PR
* added integration tests for new caddyfile directives
* improved various doc strings (punctuation and typos)
* added json tag for file_server precompress order and encode matcher
* file_server: add vary header, remove accept-ranges when serving precompressed files
* encode: move Suffix implementation to precompressed modules
* reverseproxy: Implement health_uri, replaces health_path, supports query
Also fixes a bug with `health_status` Caddyfile parsing , it would always only take the first character of the status code even if it didn't end with "xx".
* reverseproxy: Rename to URI, named logger, warn in Provision (for JSON)
This filter is intended to be useful in scenarios where you may want to
redact a value with a static string, giving you information that the
field did previously exist and was present, but not revealing the value
itself in the logs.
This was inspired by work on adding more complete support for removing
sensitive values from logs [1]. An example use case would be the
Authorization header in request log output, for which the value should
usually not be logged, but it may be quite useful for debugging to
confirm that the header was present in the request.
[1] https://github.com/caddyserver/caddy/issues/3958
* reverseproxy: Add duration/latency placeholders (close#4012) (and #2268)
Adds 4 placeholders, one is actually outside reverse proxy though:
{http.request.duration} is how long since the server decoded the HTTP request (headers).
{http.reverse_proxy.upstream.latency} is how long it took a proxy upstream to write the response header.
{http.reverse_proxy.upstream.duration} is total time proxying to the upstream, including writing response body to client.
{http.reverse_proxy.duration} is total time spent proxying, including selecting an upstream and retries.
Obviously, most of these are only useful at the end of a request, like when writing response headers or logs.
See also: https://caddy.community/t/any-equivalent-of-request-time-and-upstream-header-time-from-nginx/11418
* Add new placeholders to documentation
Proxy response bodies can now be buffered, and the size of the request body and
response body buffer can be limited. Any remaining content that doesn't fit in the
buffer will remain on the wire until it can be read; i.e. bodies are not truncated,
even if the buffer is not big enough.
This fulfills a customer requirement. This was made possible by their sponsorship!
The HTTP Caddyfile adapter can now configure the PKI app, and the acme_server directive can now be used to specify a custom CA used for issuing certificates. More customization options can follow later as needed.
If `tls <email>` is used, we should apply that to all applicable default issuers, not drop them. This refactoring applies implicit ACME issuer settings from the tls directive to all default ACME issuers, like ZeroSSL.
We also consolidate some annoying logic and improve config validity checks.
Ref: https://caddy.community/t/error-obtaining-certificate-after-caddy-restart/11335/8
* caddyhttp: Implement handler abort; new 'abort' directive (close#3871)
* Move abort directive ordering; clean up redirects
Seems logical for the end-all of handlers to go at the... end.
The Connection header no longer needs to be set there, since Close is
true, and the static_response handler now does that.
This commits dds 3 separate, but very related features:
1. Automated server identity management
How do you know you're connecting to the server you think you are? How do you know the server connecting to you is the server instance you think it is? Mutually-authenticated TLS (mTLS) answers both of these questions. Using TLS to authenticate requires a public/private key pair (and the peer must trust the certificate you present to it).
Fortunately, Caddy is really good at managing certificates by now. We tap into that power to make it possible for Caddy to obtain and renew its own identity credentials, or in other words, a certificate that can be used for both server verification when clients connect to it, and client verification when it connects to other servers. Its associated private key is essentially its identity, and TLS takes care of possession proofs.
This configuration is simply a list of identifiers and an optional list of custom certificate issuers. Identifiers are things like IP addresses or DNS names that can be used to access the Caddy instance. The default issuers are ZeroSSL and Let's Encrypt, but these are public CAs, so they won't issue certs for private identifiers. Caddy will simply manage credentials for these, which other parts of Caddy can use, for example: remote administration or dynamic config loading (described below).
2. Remote administration over secure connection
This feature adds generic remote admin functionality that is safe to expose on a public interface.
- The "remote" (or "secure") endpoint is optional. It does not affect the standard/local/plaintext endpoint.
- It's the same as the [API endpoint on localhost:2019](https://caddyserver.com/docs/api), but over TLS.
- TLS cannot be disabled on this endpoint.
- TLS mutual auth is required, and cannot be disabled.
- The server's certificate _must_ be obtained and renewed via automated means, such as ACME. It cannot be manually loaded.
- The TLS server takes care of verifying the client.
- The admin handler takes care of application-layer permissions (methods and paths that each client is allowed to use).\
- Sensible defaults are still WIP.
- Config fields subject to change/renaming.
3. Dyanmic config loading at startup
Since this feature was planned in tandem with remote admin, and depends on its changes, I am combining them into one PR.
Dynamic config loading is where you tell Caddy how to load its config, and then it loads and runs that. First, it will load the config you give it (and persist that so it can be optionally resumed later). Then, it will try pulling its _actual_ config using the module you've specified (dynamically loaded configs are _not_ persisted to storage, since resuming them doesn't make sense).
This PR comes with a standard config loader module called `caddy.config_loaders.http`.
Caddyfile config for all of this can probably be added later.
COMMITS:
* admin: Secure socket for remote management
Functional, but still WIP.
Optional secure socket for the admin endpoint is designed
for remote management, i.e. to be exposed on a public
port. It enforces TLS mutual authentication which cannot
be disabled. The default port for this is :2021. The server
certificate cannot be specified manually, it MUST be
obtained from a certificate issuer (i.e. ACME).
More polish and sensible defaults are still in development.
Also cleaned up and consolidated the code related to
quitting the process.
* Happy lint
* Implement dynamic config loading; HTTP config loader module
This allows Caddy to load a dynamic config when it starts.
Dynamically-loaded configs are intentionally not persisted to storage.
Includes an implementation of the standard config loader, HTTPLoader.
Can be used to download configs over HTTP(S).
* Refactor and cleanup; prevent recursive config pulls
Identity management is now separated from remote administration.
There is no need to enable remote administration if all you want is identity
management, but you will need to configure identity management
if you want remote administration.
* Fix lint warnings
* Rename identities->identifiers for consistency
Allows user to disable OCSP stapling (including support in the Caddyfile via the ocsp_stapling global option) or overriding responder URLs. Useful in environments where responders are not reachable due to firewalls.
This changes the signature of UnmarshalGlobalFunc but this is probably OK since it's only used by this repo as far as we know.
We need this change in order to "remember" the previous value in case a global option appears more than once, which is now a possibility with the cert_issuer option since Caddy now supports multiple issuers in the order defined by the user.
Bonus: the issuer subdirective of tls now supports one-liner for "acme" when all you need to set is the directory:
issuer acme <dir>
* reverse_proxy: 1.health check headers can be set through Caddyfile using health_headers directive; 2.health check header host can be set properly
* reverse_proxy:
replace example with syntax definition
inline health_headers directive parse function
* bugfix: change caddyfile_adapt testcase file from space to tab
* reverseproxy: modify health_header value document as optional and add more test cases
* caddyfile: Introduce basic linting and fmt check
This will help encourage people to keep their Caddyfiles tidy.
* Remove unrelated tests
I am not sure that testing the output of warnings here is quite the
right idea; these tests are just for syntax and parsing success.
At some point we changed how paths are represented down the function calls of browse listings and forgot to update the canGoUp logic. I think this is right? It's simpler now.
This allows for finer-grained control when choosing alternate chains than
simply the previous/Certbot-esque behavior of "choose first chain that
contains an issuer's common name." This update allows you to sort by
length (if optimizing for efficiency on the wire) and also to select the
chain with a specific root CommonName.
The remote_ip matcher was reading the X-Forwarded-For header by default, but this behavior was not documented in anything that was released. This is also a less secure default, as it is trivially easy to spoof request headers. Reading IPs from that header should be optional, and it should not be the default.
This is technically a breaking change, but anyone relying on the undocumented behavior was just doing so by coincidence/luck up to this point since it was never in any released documentation. We'll still add a mention in the release notes about this.
Refactor redirect route creation into own function.
Improve condition for appending port.
Fixes a bug manifested through new test case:
TestAutoHTTPRedirectsWithHTTPListenerFirstInAddresses
* add integration test for null header matcher
* implement null header matcher syntax
* avoid repeating magic !
* check for field following ! character
* fastcgi: Set PATH_INFO to file matcher remainder as fallback
* fastcgi: Avoid changing scriptName when not necessary
* Stylistic tweaks
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
The docs at os/signal.Notify warn about this signal delivery loss bug at
https://golang.org/pkg/os/signal/#Notify, which says:
Package signal will not block sending to c: the caller must ensure
that c has sufficient buffer space to keep up with the expected signal
rate. For a channel used for notification of just one signal value,
a buffer of size 1 is sufficient.
Caught by a static analysis tool from Orijtech, Inc. called "sigchanyzer"
* fix(caddy): Avoid "operation was canceled" errors
- Also add error handling for StatusGatewayTimeout
* revert(caddy): Revert 504 handling
- This will potentially break load balancing and health checks
* Handle client cancellation as different error
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
* acme_server: Refactor database creation apart from authority creation
This is a WIP commit that doesn't really offer anything other than
setting us up for using a UsagePool to gracefully reload acme_server
configs.
* Implement UsagePool
* Remove unused context
* Fix initializing non-ACME CA
This will handle cases where a DB is not provided
* Sanitize acme db path and clean debug logs
* Move regex to package level to prevent recompiling
* acme_server: switch to bbolt storage
There have been some issues with the badger storage engine
being used by the embedded acme_server. This will replace
the storage engine with bbolt
* Switch database path back to acme_server/db and remove if directory
* httpcaddyfile: First pass at implementing server options
* httpcaddyfile: Add listener wrapper support
* httpcaddyfile: Sort sbaddrs to make adapt output more deterministic
* httpcaddyfile: Add server options adapt tests
* httpcaddyfile: Windows line endings lol
* caddytest: More windows line endings lol (sorry Matt)
* Update caddyconfig/httpcaddyfile/serveroptions.go
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* httpcaddyfile: Reword listener address "matcher"
* Apply suggestions from code review
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* httpcaddyfile: Deprecate experimental_http3 option (moved to servers)
* httpcaddyfile: Remove validation step, no longer needed
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* reverseproxy: Add Caddyfile scheme shorthand for h2c
* reverseproxy: Use parentheses for condition
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* ci: Use golangci's github action for linting
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix most of the staticcheck lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the prealloc lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the misspell lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the varcheck lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the errcheck lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the bodyclose lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the deadcode lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the unused lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the gosec lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the gosimple lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the ineffassign lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Fix the staticcheck lint errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Revert the misspell change, use a neutral English
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Remove broken golangci-lint CI job
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Re-add errantly-removed weakrand initialization
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* don't break the loop and return
* Removing extra handling for null rootKey
* unignore RegisterModule/RegisterAdapter
Co-authored-by: Mohammed Al Sahaf <msaa1990@gmail.com>
* single-line log message
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* Fix lint after a1808b0dbf209c615e438a496d257ce5e3acdce2 was merged
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Revert ticker change, ignore it instead
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Ignore some of the write errors
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Remove blank line
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Use lifetime
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* close immediately
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* Preallocate configVals
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Update modules/caddytls/distributedstek/distributedstek.go
Co-authored-by: Mohammed Al Sahaf <msaa1990@gmail.com>
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* reverseproxy: Enable error logging for connection upgrades
* reverseproxy: Change some of the error levels, unsugar
* Use unsugared log in one spot
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
* implement default values for header directive
closes#3804
* remove `set_default` header op and rely on "require" handler instead
This has the following advantages over the previous attempt:
- It does not introduce a new operation for headers, but rather nicely
extends over an existing feature in the header handler.
- It removes the need to specify the header as "deferred" because it is
already implicitely deferred by the use of the require handler. This
should be less confusing to the user.
* add integration test for header directive in caddyfile
* bubble up errors when parsing caddyfile header directive
* don't export unnecessarily and don't canonicalize headers unnecessarily
* fix response headers not passed in blocks
* caddyfile: fix clash when using default header in block
Each header is now set in a separate handler so that it doesn't clash
with other headers set/added/deleted in the same block.
* caddyhttp: New idle_timeout default of 5m
* reverseproxy: fix random hangs on http/2 requests with server push (#3875)
see https://github.com/golang/go/issues/42534
* Refactor and cleanup with improvements
* More specific link
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
Co-authored-by: Денис Телюх <telyukh.denis@gmail.com>
Before, if there was an error in the error handler, we would not write a
status code, which resulted in Go writing a 200 for us by default, which
does not make sense when there's an error. Now we write the second
error's status if available, otherwise 500.
* caddytls: Support multiple issuers
Defaults are Let's Encrypt and ZeroSSL.
There are probably bugs.
* Commit updated integration tests, d'oh
* Update go.mod
* nitpicks and small improvements in basicauth module
1:
roll two if statements into one, since err will be nil in the second case anyhow
2:
unlock cache mutex after reading the key, as this happens by-value and reduces code complexity
3:
switch cache sync.Mutex to sync.RWMutex for better concurrency on cache fast track
* allocate the right kind of mutex
* fileserver: Improve and clarify file hiding logic
* Oops, forgot to run integration tests
* Make this one integration test OS-agnostic
* See if this appeases the Windows gods
* D'oh
Always follow the code path of hashing and comparing a plaintext
password even if the account is not found by the given username; this
ensures that similar CPU cycles are spent for both valid and invalid
usernames.
Thanks to @tylerlm for helping and looking into this!
We have users that have site blocks like *.*.tld with on-demand TLS
enabled. While *.*.tld does not qualify for a publicly-trusted cert due
to its wildcards, On-Demand TLS does not actually obtain a cert with
those wildcards, since it uses the actual hostname on the handshake.
This improves on that logic, but I am still not 100% satisfied with the
result since I think we need to also check if another site block is more
specific, like foo.example.tld, which might not have on-demand TLS
enabled, and make sure an automation policy gets created before the
more general policy with on-demand...
* reverseproxy: Fix dial placeholders, SRV, active health checks
Supercedes #3776
Partially reverts or updates #3756, #3693, and #3695
* reverseproxy: add integration tests
Co-authored-by: Mohammed Al Sahaf <msaa1990@gmail.com>
* reverseproxy: fix breakage in handling SRV lookup introduced by 3695
* reverseproxy: validate against incompatible config options with lookup_srv
* reverseproxy: add integration test cases for validations involving lookup_srv
* reverseproxy: clarify the reason for skipping an iteration
* grammar.. Oxford comma
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
Fixes#3753
* caddyfile: support vars and vars_regexp matchers in the caddyfile
* caddyfile: matchers: Brian Kernighan said printf is good debugging tool but didn't say keep them around
* metrics: Always track method label in uppercase
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Just use strings.ToUpper for clarity
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* metrics: Fixing panic while observing with bad exemplars
Signed-off-by: Dave Henderson <dhenderson@gmail.com>
* Minor cleanup
The server is already added to the context. So, we can simply use that
to get the server name, which is a field on the server.
* Add integration test for auto HTTP->HTTPS redirects
A test like this would have caught the problem in the first place
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
* reverseproxy: construct active health-check transport from scratch (Fixes#3691)
* reverseproxy: do upstream health-check on the correct alternative port
* reverseproxy: add integration test for health-check on alternative port
* reverseproxy: put back the custom transport for health-check http client
* reverseproxy: cleanup health-check integration test
* reverseproxy: fix health-check of unix socket upstreams
* reverseproxy: skip unix socket tests on Windows
* tabs > spaces
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* make the linter (and @francislavoie) happy
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* One more lint fix
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* fileserver: Fix try_files for directories, windows fix
* fileserver: Add new file type placeholder, refactoring, tests
* fileserver: Review cleanup
* fileserver: Flip the return args order
* Fix-3585: added placeholder for a PEM encoded value of the certificate
* Update modules/caddyhttp/replacer.go
Change type of block and empty headers removed
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* fixed tests
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* logging: Implement Caddyfile support for filter encoder
* logging: Add support for parsing IP masks from strings
wip
* logging: Implement Caddyfile support for ip_mask
* logging: Get rid of unnecessary logic to allow strings, not that useful
* logging: Add adapt test
Now, a filename to hide that is specified without a path separator will
count as hidden if it appears in any component of the file path (not
only the last component); semantically, this means hiding a file by only
its name (without any part of a path) will hide both files and folders,
e.g. hiding ".git" will hide "/.git" and also "/.git/foo".
We also do prefix matching so that hiding "/.git" will hide "/.git"
and "/.git/foo" but not "/.gitignore".
The remaining logic is a globular match like before.
Update internal issuer for compatibility -- yay simpler code!
The .1 version also fixes non-critical SAN extensions that caused trust
issues on several clients.
* ci: Try Go 1.15 RC1 out of curiosity
* Go 1.15 was released; let's try it
* Update to latest quic-go
* Attempt at fixing broken test
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
* caddytls: Add support for ZeroSSL; add Caddyfile support for issuers
Configuring issuers explicitly in a Caddyfile is not easily compatible
with existing ACME-specific parameters such as email or acme_ca which
infer the kind of issuer it creates (this is complicated now because
the ZeroSSL issuer wraps the ACME issuer)... oh well, we can revisit
that later if we need to.
New Caddyfile global option:
{
cert_issuer <name> ...
}
Or, alternatively, as a tls subdirective:
tls {
issuer <name> ...
}
For example, to use ZeroSSL with an API key:
{
cert_issuser zerossl API_KEY
}
For now, that still uses ZeroSSL's ACME endpoint; it fetches EAB
credentials for you. You can also provide the EAB credentials directly
just like any other ACME endpoint:
{
cert_issuer acme {
eab KEY_ID MAC_KEY
}
}
All these examples use the new global option (or tls subdirective). You
can still use traditional/existing options with ZeroSSL, since it's
just another ACME endpoint:
{
acme_ca https://acme.zerossl.com/v2/DV90
acme_eab KEY_ID MAC_KEY
}
That's all there is to it. You just can't mix-and-match acme_* options
with cert_issuer, because it becomes confusing/ambiguous/complicated to
merge the settings.
* Fix broken test
This test was asserting buggy behavior, oops - glad this branch both
discovers and fixes the bug at the same time!
* Fix broken test (post-merge)
* Update modules/caddytls/acmeissuer.go
Fix godoc comment
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* Add support for ZeroSSL's EAB-by-email endpoint
Also transform the ACMEIssuer into ZeroSSLIssuer implicitly if set to
the ZeroSSL endpoint without EAB (the ZeroSSLIssuer is needed to
generate EAB if not already provided); this is now possible with either
an API key or an email address.
* go.mod: Use latest certmagic, acmez, and x/net
* Wrap underlying logic rather than repeating it
Oops, duh
* Form-encode email info into request body for EAB endpoint
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* fileserver: First attempt to fix failing test on Linux
I think I updated the wrong test case before
* Make new test function
I guess what we really are trying to test is the case insensitivity of
firstSplit. So a new test function is better for that.
Matt Holt