incubator-nuttx

History

Gregory Nutt fd6d299788 Add driver for the Feescale MPL115A baramoter. From Alan Carvalho de Assis		2015-02-12 12:18:43 -06:00
..
Kconfig	DK-TM4C129X: Add support for on-board TMP100 temperature sensor	2015-01-06 11:50:56 -06:00
Make.defs	Unify sensor debug. ADX driver was using input debug; LM75 and QENCODE that their own custom debug. Now all use CONFIG_DEBUG_SENSOR, sndbg()	2014-12-16 09:54:32 -06:00
README.txt	Add ADXL345 accelerometer driver. From Alan Carvalho de Assis	2014-12-16 08:16:53 -06:00
adxl345.h	Remove reference to used variable	2015-01-31 12:49:51 -06:00
adxl345_base.c	ADXL345: Don't select device if only change SPI settings	2014-12-17 12:01:18 -06:00
adxl345_i2c.c	Unify sensor debug. ADX driver was using input debug; LM75 and QENCODE that their own custom debug. Now all use CONFIG_DEBUG_SENSOR, sndbg()	2014-12-16 09:54:32 -06:00
adxl345_spi.c	ADXL345: Don't select device if only change SPI settings	2014-12-17 12:01:18 -06:00
lis331dl.c	Rename kmalloc to kmm_malloc for consistency	2014-08-31 17:26:36 -06:00
lm75.c	DK-TM4C129X: Add support for on-board TMP100 temperature sensor	2015-01-06 11:50:56 -06:00
mpl115a.c	Add driver for the Feescale MPL115A baramoter. From Alan Carvalho de Assis	2015-02-12 12:18:43 -06:00
qencoder.c	Unify sensor debug. ADX driver was using input debug; LM75 and QENCODE that their own custom debug. Now all use CONFIG_DEBUG_SENSOR, sndbg()	2014-12-16 09:54:32 -06:00

README.txt

ADXL345
=======

The ADXL345 accelerometer can operate in I2C or SPI mode. To operate in I2C
mode just connect the CS pin to Vddi/o.

In order to operate in SPI mode CS need to use connected to microcontroller,
it cannot leave unconnected.

In SPI mode it works with clock polarity (CPOL) = 1 and clock phase (CPHA) = 1.