166 lines
6.6 KiB
C
166 lines
6.6 KiB
C
/****************************************************************************
|
|
* boards/arm/a1x/pcduino-a10/include/board.h
|
|
*
|
|
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#ifndef __BOARDS_ARM_A1X_PCDUINO_A10_INCLUDE_BOARD_H
|
|
#define __BOARDS_ARM_A1X_PCDUINO_A10_INCLUDE_BOARD_H
|
|
|
|
/****************************************************************************
|
|
* Included Files
|
|
****************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
#include "hardware/a1x_piocfg.h"
|
|
|
|
/****************************************************************************
|
|
* Pre-processor Definitions
|
|
****************************************************************************/
|
|
|
|
/* Clocking *****************************************************************/
|
|
|
|
/* Since NuttX is booted from a loader on the A10, clocking should already
|
|
* be setup when NuttX starts.
|
|
*/
|
|
|
|
/* LED definitions **********************************************************/
|
|
|
|
/* The pcDuino v1 has four green LEDs; three can be controlled from software.
|
|
* Two are tied to ground and, hence, illuminated by driving the output pins
|
|
* to a high value:
|
|
*
|
|
* 1. LED1 SPI0_CLK SPI0_CLK/UART5_RX/EINT23/PI11
|
|
* 2. LED5 IPSOUT From the PMU (not controllable by software)
|
|
*
|
|
* And two are pull high and, hence, illuminated by grounding the output:
|
|
*
|
|
* 3. LED3 RX_LED LCD1_D16/ATAD12/KP_IN6/SMC_DET/EINT16/CSI1_D16/PH16
|
|
* 4. LED4 TX_LED LCD1_D15/ATAD11/KP_IN5/SMC_VPPPP/EINT15/CSI1_D15/PH15
|
|
*/
|
|
|
|
/* LED index values for use with board_userled() */
|
|
|
|
#define BOARD_LED1 0
|
|
#define BOARD_LED3 1
|
|
#define BOARD_LED4 2
|
|
#define BOARD_NLEDS 3
|
|
|
|
/* LED bits for use with board_userled_all() */
|
|
|
|
#define BOARD_LED1_BIT (1 << BOARD_LED1)
|
|
#define BOARD_LED3_BIT (1 << BOARD_LED3)
|
|
#define BOARD_LED4_BIT (1 << BOARD_LED4)
|
|
|
|
/* These LEDs are not used by the board port unless CONFIG_ARCH_LEDS is
|
|
* defined. In that case, the usage by the board port is defined in
|
|
* include/board.h and src/a1x_leds.c. The LEDs are used to encode OS-related
|
|
* events as follows:
|
|
*
|
|
* SYMBOL Value Meaning LED state
|
|
* LED1 LED3 LED4
|
|
* ----------------- ----- ----------------------- ---- ---- --------
|
|
*/
|
|
|
|
#define LED_STARTED 0 /* NuttX has been started ON OFF OFF */
|
|
#define LED_HEAPALLOCATE 1 /* Heap has been allocated OFF ON OFF */
|
|
#define LED_IRQSENABLED 2 /* Interrupts enabled ON ON OFF */
|
|
#define LED_STACKCREATED 2 /* Idle stack created ON ON OFF */
|
|
#define LED_INIRQ 3 /* In an interrupt N/C N/C Soft glow */
|
|
#define LED_SIGNAL 3 /* In a signal handler N/C N/C Soft glow */
|
|
#define LED_ASSERTION 3 /* An assertion failed N/C N/C Soft glow */
|
|
#define LED_PANIC 3 /* The system has crashed N/C N/C 2Hz Flashing */
|
|
|
|
/* LED_IDLE --- /* MCU is is sleep mode Not used
|
|
*
|
|
* After booting, LED1 and 3 are not longer used by the system and can be
|
|
* used for other purposes by the application (Of course, all LEDs are
|
|
* available to the application if CONFIG_ARCH_LEDS is not defined.
|
|
*/
|
|
|
|
/* Button definitions *******************************************************/
|
|
|
|
/* There are a total of five switches on-board.
|
|
* All pulled high and, hence, will be sensed as low when closed.
|
|
*
|
|
* SW1 Reset (not available to software)
|
|
* SW2 UBOOT UBOOT_SEL (?)
|
|
* SW3 Key_Back LCD1_D17/ATAD13/KP_IN7/SMC_VCCEN/EINT17/CSI1_D17/PH17
|
|
* SW4 Key_Home LCD1_D18/ATAD14/KP_OUT0/SMC_SLK/EINT18/CSI1_D18/PH18
|
|
* SW5 Key_Menu LCD1_D19/ATAD15/KP_OUT1/SMC_SDA/EINT19/CSI1_D19/PH19
|
|
*/
|
|
|
|
#define BUTTON_KEY_BACK 0
|
|
#define BUTTON_KEY_HOME 1
|
|
#define BUTTON_KEY_MENU 2
|
|
#define NUM_BUTTONS 3
|
|
|
|
#define BUTTON_KEY_BACK_BIT (1 << BUTTON_KEY_BACK)
|
|
#define BUTTON_KEY_HOME_BIT (1 << BUTTON_KEY_HOME)
|
|
#define BUTTON_KEY_MENU_BIT (1 << BUTTON_KEY_MENU)
|
|
|
|
/* NAND *********************************************************************/
|
|
|
|
/* GPIO pin disambiguation **************************************************/
|
|
|
|
/* UARTs ********************************************************************/
|
|
|
|
/* Two UART connections are available:
|
|
*
|
|
* 1. UART0 is available on J5 Debug Port.
|
|
*
|
|
* J15 Pin 1 Rx UART0-RX UART0_RX/IR1_RX/PB23
|
|
* J15 Pin 2 Tx UART0-TX UART0_TX/IR1_TX/PB22
|
|
*
|
|
* 2. UART2 is available on J11
|
|
*
|
|
* J11 Pin1 UART-Rx / GPIO0 UART2_RX EINT31/SPI1_MISO/UART2_RX/PI19
|
|
* J11 Pin2 UART-Tx / GPIO1 UART2_TX EINT30/SPI1_MOSI/UART2_TX/PI18
|
|
*/
|
|
|
|
#define PIO_UART0_RX PIO_UART0_RX_1
|
|
#define PIO_UART0_TX PIO_UART0_TX_1
|
|
|
|
#define PIO_UART2_RX PIO_UART2_RX_1
|
|
#define PIO_UART2_TX PIO_UART2_TX_1
|
|
|
|
/****************************************************************************
|
|
* Assembly Language Macros
|
|
****************************************************************************/
|
|
|
|
#ifdef __ASSEMBLY__
|
|
.macro config_sdram
|
|
.endm
|
|
#endif /* __ASSEMBLY__ */
|
|
#endif /* __BOARDS_ARM_A1X_PCDUINO_A10_INCLUDE_BOARD_H */
|