96 lines
2.9 KiB
ReStructuredText
96 lines
2.9 KiB
ReStructuredText
.. include:: /substitutions.rst
|
|
.. _qemugdb:
|
|
|
|
=====================================
|
|
How to debug NuttX using QEMU and GDB
|
|
=====================================
|
|
|
|
This guide explains the steps needed to use QEMU and GDB to debug
|
|
an ARM board (lm3s6965-ek), but it could be modified to work with other
|
|
board or architecture supported by QEMU.
|
|
|
|
Start configuring and compiling the lm3s6965-ek board with qemu-flat profile.
|
|
|
|
Compiling
|
|
=========
|
|
|
|
#. Configure the lm3s6965-ek
|
|
|
|
There is a sample configuration to use lm3s6965-ek on QEMU.
|
|
|
|
Just use ``lm3s6965-ek:qemu-flat`` board profile for this purpose.
|
|
|
|
.. code-block:: console
|
|
|
|
$ cd nuttx
|
|
$ ./tools/configure.sh lm3s6965-ek:qemu-flat
|
|
|
|
#. Compile
|
|
|
|
.. code-block:: console
|
|
|
|
$ make -j
|
|
|
|
Start QEMU
|
|
==========
|
|
|
|
#. You need to start QEMU using the nuttx ELF file just create above:
|
|
|
|
.. code-block:: console
|
|
|
|
$ qemu-system-arm -M lm3s6965evb -device loader,file=nuttx -serial mon:stdio -nographic -s
|
|
Timer with period zero, disabling
|
|
ABCDF
|
|
telnetd [4:100]
|
|
|
|
NuttShell (NSH) NuttX-12.0.0
|
|
nsh>
|
|
|
|
Start GDB to connect to QEMU
|
|
============================
|
|
|
|
These steps show how to connect GDB to QEMU running NuttX:
|
|
|
|
.. code-block:: console
|
|
|
|
$ gdb-multiarch -ix tools/nuttx-gdbinit nuttx
|
|
(gdb) target extended-remote localhost:1234
|
|
Remote debugging using localhost:1234
|
|
0x000012ee in up_mdelay (milliseconds=milliseconds@entry=250)
|
|
at common/arm_mdelay.c:51
|
|
51 for (j = 0; j < CONFIG_BOARD_LOOPSPERMSEC; j++)
|
|
(gdb)
|
|
|
|
#. From (gdb) prompt you can run commands to inpect NuttX:
|
|
|
|
.. code-block:: console
|
|
|
|
(gdb) info_nxthreads
|
|
target examined
|
|
_target_arch.name=armv7
|
|
$_target_has_fpu : 1
|
|
$_target_has_smp : 0
|
|
saved current_tcb (pid=0)
|
|
*
|
|
0 Thread 0x20001538 (Name: Idle Task, State: Running, Priority: 0, Stack: 464/1000) PC: 0x12fc in up_mdelay()
|
|
saved current_tcb (pid=0)
|
|
|
|
1 Thread 0x20005060 (Name: hpwork, State: Waiting,Semaphore, Priority: 224, Stack: 320/1992) PC: 0x47dd in work_thread()
|
|
saved current_tcb (pid=0)
|
|
|
|
2 Thread 0x20005c30 (Name: nsh_main, State: Waiting,Semaphore, Priority: 100, Stack: 1016/2000) PC: 0x1 in _vectors()
|
|
saved current_tcb (pid=0)
|
|
|
|
3 Thread 0x20006b40 (Name: NTP daemon, State: Waiting,Signal, Priority: 100, Stack: 864/1952) PC: 0x0 in _vectors()
|
|
saved current_tcb (pid=0)
|
|
|
|
4 Thread 0x20008540 (Name: telnetd, State: Waiting,Semaphore, Priority: 100, Stack: 616/2008) PC: 0x20008fd4 in No()
|
|
saved current_tcb (pid=0)
|
|
saved current_tcb (pid=0)
|
|
saved current_tcb (pid=0)
|
|
saved current_tcb (pid=0)
|
|
(gdb)
|
|
|
|
As you can see QEMU and GDB are powerful tools to debug NuttX without using external board or expensive debugging hardware.
|
|
|