84 lines
3.0 KiB
Plaintext
84 lines
3.0 KiB
Plaintext
/****************************************************************************
|
|
* boards/xtensa/esp32/esp32-ethernet-kit/scripts/esp32.template.ld
|
|
* ESP32 Linker Script Memory Layout
|
|
*
|
|
* This file describes the memory layout (memory blocks) as virtual
|
|
* memory addresses.
|
|
*
|
|
* esp32.common.ld contains output sections to link compiler output
|
|
* into these memory blocks.
|
|
*
|
|
* NOTE: That this is not the actual linker script but rather a "template"
|
|
* for the elf32_out.ld script. This template script is passed through
|
|
* the C preprocessor to include selected configuration options.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#include <nuttx/config.h>
|
|
|
|
MEMORY
|
|
{
|
|
/* All these values assume the flash cache is on, and have the blocks this
|
|
* uses subtracted from the length of the various regions. The 'data access
|
|
* port' dram/drom regions map to the same iram/irom regions but are
|
|
* connected to the data port of the CPU and eg allow bytewise access.
|
|
*/
|
|
|
|
/* IRAM for PRO cpu. Not sure if happy with this, this is MMU area... */
|
|
|
|
iram0_0_seg (RX) : org = 0x40080000, len = 0x20000
|
|
|
|
/* Even though the segment name is iram, it is actually mapped to flash.
|
|
*
|
|
* NOTE: (0x20 offset above is a convenience for the app binary image
|
|
* generation.
|
|
* Flash cache has 64KB pages. The .bin file which is flashed to the chip
|
|
* has a 0x18 byte file header, and each segment has a 0x08 byte segment
|
|
* header. Setting this offset makes it simple to meet the flash cache MMU's
|
|
* constraint that (paddr % 64KB == vaddr % 64KB).)
|
|
*/
|
|
|
|
iram0_2_seg (RX) : org = 0x400d0020, len = 0x330000 - 0x20
|
|
|
|
/* Shared data RAM, excluding memory reserved for ROM bss/data/stack.
|
|
* Enabling Bluetooth & Trace Memory features in menuconfig will decrease
|
|
* the amount of RAM available.
|
|
*
|
|
* Note: The length of this section should be 0x50000, and this extra
|
|
* DRAM is available in heap at runtime. However due to static ROM memory
|
|
* usage at this 176KB mark, the additional static memory temporarily cannot
|
|
* be used.
|
|
*/
|
|
|
|
dram0_0_seg (RW) : org = 0x3ffb0000 + CONFIG_ESP32_BT_RESERVE_DRAM,
|
|
len = 0x2c200 - CONFIG_ESP32_TRACEMEM_RESERVE_DRAM - CONFIG_ESP32_BT_RESERVE_DRAM
|
|
|
|
/* Flash mapped constant data */
|
|
|
|
drom0_0_seg (R) : org = 0x3f400020, len = 0x400000 - 0x20
|
|
|
|
/* RTC fast memory (executable). Persists over deep sleep. */
|
|
|
|
rtc_iram_seg(RWX) : org = 0x400c0000, len = 0x2000
|
|
|
|
/* RTC slow memory (data accessible). Persists over deep sleep.
|
|
* Start of RTC slow memory is reserved for ULP co-processor code + data,
|
|
* if enabled.
|
|
*/
|
|
|
|
rtc_slow_seg(RW) : org = 0x50000000 + CONFIG_ESP32_ULP_COPROC_RESERVE_MEM,
|
|
len = 0x1000 - CONFIG_ESP32_ULP_COPROC_RESERVE_MEM
|
|
|
|
/* External memory, including data and text */
|
|
|
|
extmem_seg(RWX) : org = 0x3f800000, len = 0x400000
|
|
}
|
|
|
|
/* Heap ends at top of dram0_0_seg */
|
|
|
|
_eheap = 0x40000000 - CONFIG_ESP32_TRACEMEM_RESERVE_DRAM;
|
|
|
|
/* Module text area ends at top of dram0_0_seg */
|
|
|
|
_emodtext = 0x400a0000;
|