incubator-nuttx/net/udp/udp_callback.c

328 lines
9.9 KiB
C

/****************************************************************************
* net/udp/udp_callback.c
*
* Copyright (C) 2007-2009, 2015 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#if defined(CONFIG_NET) && defined(CONFIG_NET_UDP)
#include <stdint.h>
#include <string.h>
#include <debug.h>
#include <nuttx/net/netconfig.h>
#include <nuttx/net/netdev.h>
#include <nuttx/net/netstats.h>
#include <nuttx/net/udp.h>
#include "devif/devif.h"
#include "udp/udp.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#define IPv4BUF ((FAR struct ipv4_hdr_s *)&dev->d_buf[NET_LL_HDRLEN(dev)])
#define IPv6BUF ((FAR struct ipv6_hdr_s *)&dev->d_buf[NET_LL_HDRLEN(dev)])
#define UDPIPv4BUF ((FAR struct udp_hdr_s *)&dev->d_buf[NET_LL_HDRLEN(dev) + IPv4_HDRLEN])
#define UDPIPv6BUF ((FAR struct udp_hdr_s *)&dev->d_buf[NET_LL_HDRLEN(dev) + IPv6_HDRLEN])
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: udp_datahandler
*
* Description:
* Handle the receipt of UDP data by adding the newly received packet to
* the UDP read-ahead buffer.
*
****************************************************************************/
#ifdef CONFIG_NET_UDP_READAHEAD
static uint16_t udp_datahandler(FAR struct net_driver_s *dev, FAR struct udp_conn_s *conn,
FAR uint8_t *buffer, uint16_t buflen)
{
FAR struct iob_s *iob;
int ret;
#ifdef CONFIG_NET_IPv6
FAR struct sockaddr_in6 src_addr6;
#endif
#ifdef CONFIG_NET_IPv4
FAR struct sockaddr_in src_addr4;
#endif
FAR void *src_addr;
uint8_t src_addr_size;
/* Allocate on I/O buffer to start the chain (throttling as necessary).
* We will not wait for an I/O buffer to become available in this context.
*/
iob = iob_tryalloc(true);
if (iob == NULL)
{
nerr("ERROR: Failed to create new I/O buffer chain\n");
return 0;
}
#ifdef CONFIG_NET_IPv6
#ifdef CONFIG_NET_IPv4
if (IFF_IS_IPv6(dev->d_flags))
#endif
{
FAR struct udp_hdr_s *udp = UDPIPv6BUF;
FAR struct ipv6_hdr_s *ipv6 = IPv6BUF;
src_addr6.sin6_family = AF_INET6;
src_addr6.sin6_port = udp->srcport;
net_ipv6addr_copy(src_addr6.sin6_addr.s6_addr, ipv6->srcipaddr);
src_addr_size = sizeof(src_addr6);
src_addr = &src_addr6;
}
#endif /* CONFIG_NET_IPv6 */
#ifdef CONFIG_NET_IPv4
#ifdef CONFIG_NET_IPv6
else
#endif
{
#ifdef CONFIG_NET_IPv6
/* Hybrid dual-stack IPv6/IPv4 implementations recognize a special
* class of addresses, the IPv4-mapped IPv6 addresses.
*/
if (conn->domain == PF_INET6)
{
FAR struct udp_hdr_s *udp = UDPIPv6BUF;
FAR struct ipv6_hdr_s *ipv6 = IPv6BUF;
in_addr_t ipv4addr;
/* Encode the IPv4 address as an IPv-mapped IPv6 address */
src_addr6.sin6_family = AF_INET6;
src_addr6.sin6_port = udp->srcport;
ipv4addr = net_ip4addr_conv32(ipv6->srcipaddr);
ip6_map_ipv4addr(ipv4addr, src_addr6.sin6_addr.s6_addr16);
src_addr_size = sizeof(src_addr6);
src_addr = &src_addr6;
}
else
#endif
{
FAR struct udp_hdr_s *udp = UDPIPv4BUF;
FAR struct ipv4_hdr_s *ipv4 = IPv4BUF;
src_addr4.sin_family = AF_INET;
src_addr4.sin_port = udp->srcport;
net_ipv4addr_copy(src_addr4.sin_addr.s_addr,
net_ip4addr_conv32(ipv4->srcipaddr));
src_addr_size = sizeof(src_addr4);
src_addr = &src_addr4;
}
}
#endif /* CONFIG_NET_IPv4 */
/* Copy the src address info into the I/O buffer chain. We will not wait
* for an I/O buffer to become available in this context. It there is
* any failure to allocated, the entire I/O buffer chain will be discarded.
*/
ret = iob_trycopyin(iob, (FAR const uint8_t *)&src_addr_size,
sizeof(uint8_t), 0, true);
if (ret < 0)
{
/* On a failure, iob_trycopyin return a negated error value but does
* not free any I/O buffers.
*/
nerr("ERROR: Failed to add data to the I/O buffer chain: %d\n", ret);
(void)iob_free_chain(iob);
return 0;
}
ret = iob_trycopyin(iob, (FAR const uint8_t *)src_addr, src_addr_size,
sizeof(uint8_t), true);
if (ret < 0)
{
/* On a failure, iob_trycopyin return a negated error value but does
* not free any I/O buffers.
*/
nerr("ERROR: Failed to add data to the I/O buffer chain: %d\n", ret);
(void)iob_free_chain(iob);
return 0;
}
if (buflen > 0)
{
/* Copy the new appdata into the I/O buffer chain */
ret = iob_trycopyin(iob, buffer, buflen,
src_addr_size + sizeof(uint8_t), true);
if (ret < 0)
{
/* On a failure, iob_trycopyin return a negated error value but
* does not free any I/O buffers.
*/
nerr("ERROR: Failed to add data to the I/O buffer chain: %d\n",
ret);
(void)iob_free_chain(iob);
return 0;
}
}
/* Add the new I/O buffer chain to the tail of the read-ahead queue */
ret = iob_tryadd_queue(iob, &conn->readahead);
if (ret < 0)
{
nerr("ERROR: Failed to queue the I/O buffer chain: %d\n", ret);
(void)iob_free_chain(iob);
return 0;
}
ninfo("Buffered %d bytes\n", buflen);
return buflen;
}
#endif /* CONFIG_NET_UDP_READAHEAD */
/****************************************************************************
* Name: net_dataevent
*
* Description:
* Handling the network UDP_NEWDATA event.
*
****************************************************************************/
static inline uint16_t
net_dataevent(FAR struct net_driver_s *dev, FAR struct udp_conn_s *conn,
uint16_t flags)
{
uint16_t ret;
#ifdef CONFIG_NET_UDP_READAHEAD
uint8_t *buffer = dev->d_appdata;
int buflen = dev->d_len;
uint16_t recvlen;
#endif
ret = (flags & ~UDP_NEWDATA);
/* Is there new data? With non-zero length? (Certain connection events
* can have zero-length with UDP_NEWDATA set just to cause an ACK).
*/
ninfo("No receive on connection\n");
#ifdef CONFIG_NET_UDP_READAHEAD
/* Save as the packet data as in the read-ahead buffer. NOTE that
* partial packets will not be buffered.
*/
recvlen = udp_datahandler(dev, conn, buffer, buflen);
if (recvlen < buflen)
#endif
{
/* There is no handler to receive new data and there are no free
* read-ahead buffers to retain the data -- drop the packet.
*/
ninfo("Dropped %d bytes\n", dev->d_len);
#ifdef CONFIG_NET_STATISTICS
g_netstats.udp.drop++;
#endif
}
/* In any event, the new data has now been handled */
dev->d_len = 0;
return ret;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: udp_callback
*
* Description:
* Inform the application holding the UDP socket of a change in state.
*
* Returned Value:
* OK if packet has been processed, otherwise ERROR.
*
* Assumptions:
* This function must be called with the network locked.
*
****************************************************************************/
uint16_t udp_callback(FAR struct net_driver_s *dev,
FAR struct udp_conn_s *conn, uint16_t flags)
{
ninfo("flags: %04x\n", flags);
/* Some sanity checking */
if (conn)
{
/* Perform the callback */
flags = devif_conn_event(dev, conn, flags, conn->list);
if ((flags & UDP_NEWDATA) != 0)
{
/* Data was not handled.. dispose of it appropriately */
flags = net_dataevent(dev, conn, flags);
}
}
return flags;
}
#endif /* CONFIG_NET && CONFIG_NET_UDP */