incubator-nuttx/drivers/wireless/ieee80211/bcm43xxx/bcmf_chip_43438.c

100 lines
3.9 KiB
C

/****************************************************************************
* drivers/wireless/bcm43xxx/ieee80211/bcmf_chip_43438.c
*
* Copyright (C) 2018 Gregory Nutt. All rights reserved.
* Author: Simon Piriou <spiriou31@gmail.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include "bcmf_sdio.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#define WRAPPER_REGISTER_OFFSET 0x100000
/****************************************************************************
* Public Data
****************************************************************************/
extern const char ap6212_nvram_image[];
extern const unsigned int ap6212_nvram_image_len;
#ifndef CONFIG_IEEE80211_BROADCOM_FWFILES
extern const uint8_t ap6212_firmware_image[];
extern const unsigned int ap6212_firmware_len;
extern const uint8_t ap6212_clm_blob[];
extern const unsigned int ap6212_clm_blob_len;
#endif
const struct bcmf_sdio_chip bcmf_43438_config_sdio =
{
/* General chip stats */
.ram_size = 512 * 1024,
/* Backplane architecture */
.core_base =
{
[CHIPCOMMON_CORE_ID] = 0x18000000, /* Chipcommon core register base */
[DOT11MAC_CORE_ID] = 0x18001000, /* dot11mac core register base */
[SDIOD_CORE_ID] = 0x18002000, /* SDIOD Device core register base */
[WLAN_ARMCM3_CORE_ID] = 0x18003000 + /* ARMCM3 core register base */
WRAPPER_REGISTER_OFFSET,
[SOCSRAM_CORE_ID] = 0x18004000 + /* SOCSRAM core register base */
WRAPPER_REGISTER_OFFSET
},
/* Firmware images */
/* TODO find something smarter than using image_len references */
.nvram_image = (FAR uint8_t *)ap6212_nvram_image,
.nvram_image_size = (FAR unsigned int *)&ap6212_nvram_image_len,
#ifndef CONFIG_IEEE80211_BROADCOM_FWFILES
.firmware_image = (FAR uint8_t *)ap6212_firmware_image,
.firmware_image_size = (FAR unsigned int *)&ap6212_firmware_len,
.clm_blob_image = (FAR uint8_t *)ap6212_clm_blob,
.clm_blob_image_size = (FAR unsigned int *)&ap6212_clm_blob_len,
#endif
};